markrhoden | 06-08-2011 06:41 | kp500 hung up after flash dead (solution needed) i have lg kp500 the problem is hung up after i flash dead
i need solution for this:
this is the logs: http://img12.imageshack.us/img12/7054/unledsak.png Quote:
Loading module , please wait...
PMB8877 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KP500 in UART Mode (COM11 ,921600)
BOOT Failed
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KP500 in UART Mode (COM11 ,921600)
BOOT Failed
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KP500 in UART Mode (COM11 ,115200)
BOOT Failed
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KP500 in UART Mode (COM11 ,115200)
BOOT Failed
Disconnected.
TIP: Please reconnect phone battery / power source.
Loading module , please wait...
PMB8877 Module 2.0 started. SW: Ver 3.2.0.0
Connecting to KP500 in USB Mode
Please connect phone , it must be powered off
Phone found! (MCU:SG3_USB) prebooting...
Flash ID: 018903
*Note in USB mode flash id can be incorrectly read*
BOOT Stage Finished , sending authority...
Sending SEC pack...
Certificate Failed!
Finished in 6 seconds
Found firmware version marker...
Opening "LGP500AT-00-V10d-EUR-XX-OCT-22-2010+0-DZ.dz"...
Writing Firmware...
Sending SEC pack...
Certificate Failed!
Finished in 6 seconds
Opening "LGP500AT-00-V10d-EUR-XX-OCT-22-2010+0-DZ.dz"...
Writing Firmware...
Sending SEC pack...
Certificate Failed!
Finished in 9 seconds
Opening "LGP500AT-00-V10d-EUR-XX-OCT-22-2010+0-DZ.dz"...
Writing Firmware...
Sending SEC pack...
Certificate Failed!
Finished in 6 seconds
| |