Lg 3g Flashiing
 

i have flasher , flash files
but no cable, i made a cable com+usb as defined in schematics.

when i power on the phone , flasher is not responding.
if it is cable problem ,cable is working well for babe unlocker and furious cracked.

what to do now?

actual problems are........
1) 8120 blinking problem
2) 8120 v 103 for unlock.
want solution for both.

please want an helping hand regarding these..

thanks in adv
magnet is online now Edit/Delete Message Reply With Quote Quick reply to this message

did u provide 9v to cable or not

thanks for your reply
no , please tell me the pinouts for 9v

thanks in adv

This is the pinout for 9V scheme:

Top Side of connector(phone Display)

24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

21 link to 2
19 link to 12 to gnd
18 tx(max 232)
17 rx(max232)
16 +5v (usb)
15 tx(usb)
10 rx (usb)

Check http://forum.gsmhosting.com/vbb/show...t=8130+flasher at Hunk4004's post
I made this cable and it's work 100%. I flashed an LG 8130 and some 8120. :)

@gsmboy

thanks for ur prompt reply.

i made my lg unlock cable destroying my t191 cable for rx tx gnd.
please tell me where to give 9v + for which pin.

thanks in adv

You must use a cable which have DB9 connector for serial and supply connector on it. It is the easy way. Your cable is good, but only for unlock. I made my cable from a gx15 cable.

can you suggest me a cable.other than gx15

x70?????????

thanks in adv

If it has db9 connector and supply connector it's good. It could be X70.

pinout given by gsm boy are working perfectly!!!
i already flashed a dead 8110 and it's working fine now!!

can i use 9v universal box which comes with 55 cables

OK ..everywhere I see this cable pinout the USB communication is described as RX and TX. There is no such a thing!!! USB communication is more similar to RS485 than to RS232. There is USB- and USB+ and the data is transmited both ways using USB frames.
SO WHICH ONE IS USB+ and USB-????
:confused: :confused: :confused:

Here usb pinouts, but to your cable don`t put gnd. Use only +5v, data+, data-.
And one more thing, tx and rx means TX data or RX data
BR, xyz

i make a cble and connact with phone . dettacting lg8xxx but asking driver wchich is the driver

this is a driver which u want my friend

http://www.xtreme-h.net/~filarkiv/
http://mio.discoremoto.virgilio.it/vittoriovalerio/
http://www.furiousdongle.com/guides-lg3g-flasher-en.php