philips - GSM-Forum

gaznasty · 03-10-2007, 22:46

Hello all,

Would someone please help me to get my Philips Renault radio working again, I removed the battery whilst changing the cylinder head last month and when I reconnected the battery on finishing this repair, I found the only thing to appear on the display was code!

The are loads of barcodes and number pasted all over the unit when I removed it to see if I could find the serial number and model number, so I have the 2 most relevant numbers below.

Model number 22DC449/62L
Serial number RN449FW4171905

Please could anyone help me I would be genuienly grateful

Thank you

aydın0071 · 03-12-2007, 13:58

Quote:

Originally Posted by gaznasty

Hello all,

Would someone please help me to get my Philips Renault radio working again, I removed the battery whilst changing the cylinder head last month and when I reconnected the battery on finishing this repair, I found the only thing to appear on the display was code!

The are loads of barcodes and number pasted all over the unit when I removed it to see if I could find the serial number and model number, so I have the 2 most relevant numbers below.

Model number 22DC449/62L
Serial number RN449FW4171905

Please could anyone help me I would be genuienly grateful

Thank you

24W166 EPROM READE---

gaznasty · 03-12-2007, 21:16

Hello and thanks for the reply, following a long time looking around the internet I found suggestions of reading the eeprom, it took ages to work out which chip was the eeprom and I have found out a programmer that I orignally purchased from Jaycar electronics to originally program pic chips.

I dont mean to sound stupid and apologise for my ineptitude and that put to one side, I am a complete novice at this (reading eeproms), am I likely to cause any damage to the components on the mainboard of the stereo by reading the eeprom or is it supposed to be desoldered?

Would I be right in thinking that the clock from the programmer runs to the scl, data from the programmer runs to the sda, ground runs to wp and pins 1,2,3,4 and 5 volt live runs to vcc with a capacitor to ground?

I would appreciate any advice to learn how to read this eeprom without destroying my radio!

thank you

Garry

mar12 · 03-12-2007, 21:31

Quote:

Originally Posted by gaznasty

Hello all,

Would someone please help me to get my Philips Renault radio working again, I removed the battery whilst changing the cylinder head last month and when I reconnected the battery on finishing this repair, I found the only thing to appear on the display was code!

The are loads of barcodes and number pasted all over the unit when I removed it to see if I could find the serial number and model number, so I have the 2 most relevant numbers below.

Model number 22DC449/62L
Serial number RN449FW4171905

Please could anyone help me I would be genuienly grateful

Thank you

Your Radio-Code is 3302

gaznasty · 03-13-2007, 00:10

Thank you very much mar12

I am grateful for the code.

Garry

neometala · 07-31-2007, 19:16

Hi i need code for Philips Peugeot Radio

Model 22dc710/65
SN: PHAPAFR9003554

03-10-2007, 22:46	#1 (permalink)
gaznasty Junior Member Join Date: Mar 2007 Posts: 11 Member: 465557 Status: Offline Thanks Meter: 0	philips renault radio code needed Hello all, Would someone please help me to get my Philips Renault radio working again, I removed the battery whilst changing the cylinder head last month and when I reconnected the battery on finishing this repair, I found the only thing to appear on the display was code! The are loads of barcodes and number pasted all over the unit when I removed it to see if I could find the serial number and model number, so I have the 2 most relevant numbers below. Model number 22DC449/62L Serial number RN449FW4171905 Please could anyone help me I would be genuienly grateful Thank you

03-12-2007, 21:16	#3 (permalink)
gaznasty Junior Member Join Date: Mar 2007 Posts: 11 Member: 465557 Status: Offline Thanks Meter: 0	hello and thanks for the response Hello and thanks for the reply, following a long time looking around the internet I found suggestions of reading the eeprom, it took ages to work out which chip was the eeprom and I have found out a programmer that I orignally purchased from Jaycar electronics to originally program pic chips. I dont mean to sound stupid and apologise for my ineptitude and that put to one side, I am a complete novice at this (reading eeproms), am I likely to cause any damage to the components on the mainboard of the stereo by reading the eeprom or is it supposed to be desoldered? Would I be right in thinking that the clock from the programmer runs to the scl, data from the programmer runs to the sda, ground runs to wp and pins 1,2,3,4 and 5 volt live runs to vcc with a capacitor to ground? I would appreciate any advice to learn how to read this eeprom without destroying my radio! thank you Garry

03-13-2007, 00:10	#5 (permalink)
gaznasty Junior Member Join Date: Mar 2007 Posts: 11 Member: 465557 Status: Offline Thanks Meter: 0	Thank you Thank you very much mar12 I am grateful for the code. Garry

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
28-08-2007 New Philips update. Added support for Philips 960 and Philips 786!	GSMtricks	Multi-Box	2	08-28-2007 11:54
28-08-2007 New Philips update. Added support for Philips 968 and Philips 786!	GSMtricks	Multi-box LITE	0	08-28-2007 11:09
rVolume PHILIPS OFFER - philips 530 supported	OrbiTel	Main Sales Section	0	12-16-2003 16:13
Philips/Sendo/Alcatel Service Tools. EastEurope language pack for all philips models	DELOK	Main Sales Section	0	09-29-2003 00:32
Philips Fisio 330 RUSSIAN language - Philips, Sendo, Alcatel Service Tools	DELOK	Main Sales Section	0	08-10-2003 01:42

07-31-2007, 19:16	#6 (permalink)
neometala Junior Member Join Date: Jul 2007 Posts: 6 Member: 557852 Status: Offline Thanks Meter: 0	Hi i need code for Philips Peugeot Radio Model 22dc710/65 SN: PHAPAFR9003554