cd70 code

[myrsik]

Hi

I need code cd70
Siemens vdo
Model: gmgehu4v1-01
Product numer: fd0605420550602

dump:

https://megawrzuta.pl/download/778bf...82cdd80ec.html


the radio is from another car. Can you disable the code and assign it to a different VIN? Or maybe it is possible to disable the assignment to a specific car permanently?

Thank You!

[shooting@orange]

Originally Posted by myrsik

Hi

I need code cd70
Siemens vdo
Model: gmgehu4v1-01
Product numer: fd0605420550602

dump:

https://megawrzuta.pl/download/778bf...82cdd80ec.html


the radio is from another car. Can you disable the code and assign it to a different VIN? Or maybe it is possible to disable the assignment to a specific car permanently?

Thank You!

Here is your dump unregistered, pair using Display PIN .. pass in PM

wbr

[myrsik]

Originally Posted by shooting@orange

using Display PIN

wbr

Display PIN?

Thank You!

[shooting@orange]

Originally Posted by myrsik

Display PIN?

Thank You!

Yes, it needs pairing with the car's Display
Open display and read eeprom if you don't have CarPass

wbr

[myrsik]

The radio turns on, but after 10 seconds it turns off and you hear a beep in the speakers every few seconds.

[shooting@orange]

Originally Posted by myrsik

The radio turns on, but after 10 seconds it turns off and you hear a beep in the speakers every few seconds.

What OBD tool are you pairing with?


wbr

[myrsik]

Originally Posted by shooting@orange

What OBD tool are you pairing with?


wbr

I do not really understand. Previously, there was a cd30 radio in this car. After uploading your file, the radio turns on, the display shows information about the radio station, there is sound in the speakers. After 10 seconds, the on-board computer (air conditioning etc) appears on the display, the radio turns off and you hear a beep in the speakers. When I set them up, the situation repeats itself. 3 cubes are connected: power, antenna and display.

[shooting@orange]

Originally Posted by myrsik

I do not really understand. Previously, there was a cd30 radio in this car. After uploading your file, the radio turns on, the display shows information about the radio station, there is sound in the speakers. After 10 seconds, the on-board computer (air conditioning etc) appears on the display, the radio turns off and you hear a beep in the speakers. When I set them up, the situation repeats itself. 3 cubes are connected: power, antenna and display.

Correct, now you need to use your OBD2 tool to pair the radio to the display.
But if your previous radio was a CD30 then you might not have the correct display installed for the CD70.
What Display are you trying to pair with? CID GID BID?
also you did not say what OBD2 tool you are using to pair radio?

wbr

[myrsik]

Originally Posted by shooting@orange

What Display are you trying to pair with? CID GID BID?

wbr

CID. 3 lines of information.

[shooting@orange]

Originally Posted by myrsik

CID. 3 lines of information.

Should be able to pair with that, what errors are you getting on your OBD2 tool?


wbr

[myrsik]

Sorry. This CID display worked with this cd70 radio in another car. The cd30 radio was removed together with the old display. Only now did I get this information.

[shooting@orange]

Originally Posted by myrsik

Sorry. This CID display worked with this cd70 radio in another car. The cd30 radio was removed together with the old display. Only now did I get this information.

You need dumps from both displays...
New Display will need modifying to work in new car

wbr

[myrsik]

Originally Posted by shooting@orange

You need dumps from both displays...
New Display will need modifying to work in new car

wbr

from which electronic circuit should I read the content? eeprom? mcu?

[shooting@orange]

Originally Posted by myrsik

from which electronic circuit should I read the content? eeprom? mcu?

Only one eeprom, just need to read it


wbr

[myrsik]

Originally Posted by shooting@orange

Only one eeprom, just need to read it


wbr

93c56

https://megawrzuta.pl/download/83f9e...b75c15bf6.html