sharp gx10i handset lock

[patric]

i need solution for sharp gx10i handset lock
thx

[shoey]

have u tried 4 zero`s

[matrix05300]

use v*l*n* stuff 3.1 it works

WBR,

[patric]

Originally Posted by matrix05300

use v*l*n* stuff 3.1 it works

WBR,

not work the only solution is :
for all o have problems works 101%

full factory reset - clears EVERYTHING

Remove SIM

1 Press 0, 3, top right key and Red key together for about 3 secs until a white display is shown.

2 Press 0 ap1 ap 2ap 3 top right key, 1, in sequence. The Diagnosis menu should be displayed.

3 Enter 99 and press the top right key. A message should be displayed saying Input Mode No:


4 Enter 1 and press the top right key. The following messages should appear:
· EE_FORMAT START
· EE_FORMAT OK
· EE_INIT(1) START
· EE_INIT(1) OK
· BBSRAM CLEAR END
· FINISHED
· PLEASE ANY KEY
5 Wait until all the above messages are displayed and then press the top right key.
6 Press the M key (very important). Message should display Diag Param Saving.
7 Press the red key to power down the phone

100% work tested