Dead SAMSUNG A800 - GSM-Forum

KATOUE · 01-23-2003, 00:04

When I try to turn on the fone it just blink, is there any solution for that, or LINK to flasher ?

Thanks

zmicier · 01-23-2003, 00:52

are you sure the accu is good and charged?

anhtam · 01-23-2003, 00:55

What you do with your phone? You flash it with flasher read from toolbox 4.3

KATOUE · 01-23-2003, 00:56

@ zmicier

Yes I am sure the accu is good and fully charged.

@ anhtam
NO I have used old CLIPs to unlock it .

1ST · 01-23-2003, 01:26

hmmmmmmm

i think that you have destroyed eeprom!!!!
thats not a problem try to upload eeprom to the phone and it will be ok

Regards 1ST

KATOUE · 01-23-2003, 10:02

I do not have a EEPROM file, please any one can send me A800 EEPROM file, The IEMI is not a problem .

Thanks

VsH-GsM · 01-23-2003, 10:45

even if you have EEPROM dump,you can't upload eeprom to phone using I2C cable!
first write full flash to phone then if not repaired,you have to write eeprom using my new eeprom writer...

REGARDS

KATOUE · 01-23-2003, 10:54

@VsH-GsM
Please any LINK to that full flash ??

BLIDA · 01-23-2003, 11:12

check your email

KATOUE · 01-23-2003, 11:52

Nothing there

OMBOSSMAN · 01-23-2003, 13:10

go http://vsh.gsmunlock.sk services section i see have a800 flash

KATOUE · 01-23-2003, 13:31

Thanks to you ALL

dedekwien · 01-23-2003, 13:58

So Friends
Most problem by A800(75%) like blinking display or blue light on display and FRAME come from bad MAIN SW ,he maked by production,that mean original what coming with phone.
Samsung dont have test till now with all Operators and be happend next case:
Some operators have special funktion like SIM TOOL KIT OR SIM INFO and more like this.Another funktion like send WAP and else need special protocol (information)from SIMCARD and phone.And here come a problem.Network operator send some question to phone and SIM card and phone dont know the answer,then SW quick reading EEPROM data and dont found the answer and what happent???Phone reboot(reset) and deleting some line in EEPROM.And you have blank screen and Start up FRAME at display and your phone still stay like Full at the Rain.
What now????
At time Samsung relase 6 new SW for different MARKET and desolve this problem inside Main SW.I have all 6 SW but I will upload SW for EUROPE MARKET.
If some one give me good link,I will upload newest SW and you will flash your phone with this newest soft and your phone will be good.
But you must have good flash interface for flashing A800 (like interface for flashing R210).
Regards

[email protected]

hakika · 02-03-2003, 02:03

so wher can we get this goood flash for A800?

yaya · 02-03-2003, 08:36

i try only to connect to my samsung x800
after coneting lcd get problem
the phone power off affter some minutes
help

01-23-2003, 00:04	#1 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	Dead SAMSUNG A800 When I try to turn on the fone it just blink, is there any solution for that, or LINK to flasher ? Thanks

01-23-2003, 00:56	#4 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	@ zmicier Yes I am sure the accu is good and fully charged. @ anhtam NO I have used old CLIPs to unlock it . Last edited by KATOUE; 01-23-2003 at 01:04.

01-23-2003, 13:10	#11 (permalink)
OMBOSSMAN No Life Poster Join Date: Dec 2001 Location: [☾✫ ] Age: 58 Posts: 2,141 Member: 8159 Status: Offline Thanks Meter: 98	katoue go http://vsh.gsmunlock.sk services section i see have a800 flash

01-23-2003, 13:58	#13 (permalink)
dedekwien Freak Poster Join Date: May 2001 Location: Wien,Austria Posts: 192 Member: 4544 Status: Offline Thanks Meter: 4	A800 problem So Friends Most problem by A800(75%) like blinking display or blue light on display and FRAME come from bad MAIN SW ,he maked by production,that mean original what coming with phone. Samsung dont have test till now with all Operators and be happend next case: Some operators have special funktion like SIM TOOL KIT OR SIM INFO and more like this.Another funktion like send WAP and else need special protocol (information)from SIMCARD and phone.And here come a problem.Network operator send some question to phone and SIM card and phone dont know the answer,then SW quick reading EEPROM data and dont found the answer and what happent???Phone reboot(reset) and deleting some line in EEPROM.And you have blank screen and Start up FRAME at display and your phone still stay like Full at the Rain. What now???? At time Samsung relase 6 new SW for different MARKET and desolve this problem inside Main SW.I have all 6 SW but I will upload SW for EUROPE MARKET. If some one give me good link,I will upload newest SW and you will flash your phone with this newest soft and your phone will be good. But you must have good flash interface for flashing A800 (like interface for flashing R210). Regards [email protected]

02-03-2003, 08:36	#15 (permalink)
yaya Freak Poster Join Date: Aug 2000 Location: senegal Posts: 232 Member: 1964 Status: Offline Thanks Meter: 1	lcd problem i try only to connect to my samsung x800 after coneting lcd get problem the phone power off affter some minutes help

01-23-2003, 00:52	#2 (permalink)
zmicier Freak Poster Join Date: Oct 2001 Location: Minsk, Belarus Posts: 251 Member: 6937 Status: Offline Thanks Meter: 0	are you sure the accu is good and charged?

01-23-2003, 00:55	#3 (permalink)
anhtam No Life Poster Join Date: Dec 2001 Age: 56 Posts: 1,146 Member: 7721 Status: Offline Sonork: 100.1598522 Thanks Meter: 23	What you do with your phone? You flash it with flasher read from toolbox 4.3

01-23-2003, 01:26	#5 (permalink)
1ST Freak Poster Join Date: Sep 2002 Location: EVERY WHERE Posts: 231 Member: 15647 Status: Offline Thanks Meter: 0	hmmmmmmm i think that you have destroyed eeprom!!!! thats not a problem try to upload eeprom to the phone and it will be ok Regards 1ST

01-23-2003, 10:02	#6 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	I do not have a EEPROM file, please any one can send me A800 EEPROM file, The IEMI is not a problem . Thanks

01-23-2003, 10:45	#7 (permalink)
VsH-GsM Banned Join Date: Nov 2001 Location: IRAN Age: 38 Posts: 3,679 Member: 7444 Status: Offline Sonork: 100.99999 Thanks Meter: 10,013	even if you have EEPROM dump,you can't upload eeprom to phone using I2C cable! first write full flash to phone then if not repaired,you have to write eeprom using my new eeprom writer... REGARDS

01-23-2003, 10:54	#8 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	@VsH-GsM Please any LINK to that full flash ??

01-23-2003, 11:12	#9 (permalink)
BLIDA No Life Poster Join Date: Sep 2002 Location: ALGERIA Posts: 1,716 Member: 15439 Status: Offline Sonork: 100.43816 Thanks Meter: 52	check your email

01-23-2003, 11:52	#10 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	Nothing there

01-23-2003, 13:31	#12 (permalink)
KATOUE No Life Poster Join Date: Feb 2002 Location: UK Posts: 948 Member: 9732 Status: Offline Thanks Meter: 27	Thanks to you ALL

02-03-2003, 02:03	#14 (permalink)
hakika No Life Poster Join Date: Sep 2001 Location: Palestine-Iraq-Afghanistan.... Age: 25 Posts: 532 Member: 6478 Status: Offline Thanks Meter: 3	so wher can we get this goood flash for A800?

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
SAMSUNG A800 DEAD _ Help plz	ARC	Samsung Hardware Repair	34	04-08-2008 17:55
Samsung A800 dead pls help???	proxy_gsm	SYSOL Platform	1	12-01-2004 20:20
Samsung A800 dead after inputing 27673855# pls help	chinex14	VLSI, Conexant, Skyworks and Old Models	5	09-01-2003 08:16
samsung a800 dead	jokkergsm	Samsung Hardware Repair	3	06-03-2003 08:31
samsung A800 russian flash	SiRoYa	VLSI, Conexant, Skyworks and Old Models	0	12-08-2002 16:21