Upgrading T100 to T108 - GSM-Forum

Charly · 09-25-2002, 13:03

Hi All

Has Anyone managed to do this succesfully if so can anyone share any info on what flash file to use for english language what equipment is needed Eg cables JIG box ect also what the procedure is and do you need to update any eeprom areas or need any codes to finalise flashing.

I have been informed that all you need is the standard cable that comes with the T100 and a T108 Flash File and when you have finished you enter one or two reset codes but I dont know how true any of this is.

Any help would be greatly appreciated

regards
Charlie

ptodic · 09-25-2002, 15:32

What is the difference between t100 and t108?

Thanx

odyssey · 09-25-2002, 16:33

I think T108 it`s china phone

Charly · 09-25-2002, 16:35

Hi ptodic

The Differances between T100 and T108 are quite a few, Number one being able to receive text reports when you send a message as this is not available to pay as you go customers, also you have a real cool feature of having an answering machine built into the phone so you wont have to pay anyone to retreive your voice mail anymore.

Yes odyssey I think you are correct this is a china phone but I beleive it has the english language and t9 dictionary but of course this is what I am asking so I could be wrong.

regards
Charlie

GURO · 09-26-2002, 12:19

I do not know how upgrade t100 with t108 because never seen t108 flash file yet
but I have downgrade t108 to t100 withouth any problem
ounly I unchek chek checksum in tulbox4.0
and all was ok

***acyl2000*** · 09-26-2002, 12:42

if you need the T108 flash file just contact me

Charly · 09-26-2002, 21:12

Hi acyl2000 & Bert

I have sent you both an email mates

again any help would be appreciated.

regards
Charlie

***acyl2000*** · 09-27-2002, 09:03

Charly & DABOSS
login your mailbox plz

Charly · 09-27-2002, 11:22

Cheers acyl2000

thanks for the file mate,

Does anyone have any info on how to flash T100 safely Eg: what software to flash with and with what options selected ect also will I need any form of Checksum at the end Ie: JIG box

again any help would be appreciated.

Regards
Charlie

gsmfun · 09-27-2002, 22:06

Using WinTdn to flash the phone will be ok. Select Binary + Ogm.

If can't flash complete just need to charge ur battery full.

If phone dead don't worry, just flash axf first and then ogm.

maher_teamoo · 09-27-2002, 22:39

i done that but when i finish it says that cheksums is bad

Charly · 09-29-2002, 18:29

hi all

OK thanks to all who have helped in this thread,
I think I have everything I require but is there no checksums to calculate after flashing, and if there is how do I calculate if I dont have a JIG box or is there no security checksums in flash, if I need JIG box then I will aquire it but I would rather know before I attempt it.

ANY BODY KNOW PLEASE!

regards
charlie

PS Any one know how to check/workout what firmware you have in phone if you type *#8888# it gives you lots of figures eg: T100 05.05 MP 27.00 but what the hell does this mean.

gsmfun · 09-29-2002, 19:27

Using *#9999# check the version of sw for All Samsung phones.

Charly · 09-30-2002, 00:04

Hi and thanks all

Cheers GSMFUN thanks for the help mate works super as 108 mate

*#9999# works on t108 but on t100 its *#8888#

PS: is there any software that can read the samsung flash out off the mobile before we upgrade.

Regards
Charlie

skedone · 09-30-2002, 21:32

@charly

did you flash/upgrade the phone and if so what flash did u use and what did u use to calc checksums??

also what were the differennces

thanks in advance

09-25-2002, 13:03	#1 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	Upgrading T100 to T108 Hi All Has Anyone managed to do this succesfully if so can anyone share any info on what flash file to use for english language what equipment is needed Eg cables JIG box ect also what the procedure is and do you need to update any eeprom areas or need any codes to finalise flashing. I have been informed that all you need is the standard cable that comes with the T100 and a T108 Flash File and when you have finished you enter one or two reset codes but I dont know how true any of this is. Any help would be greatly appreciated regards Charlie

09-25-2002, 15:32	#2 (permalink)
ptodic Junior Member Join Date: Aug 2002 Location: Budapest, Hungary Posts: 12 Member: 14306 Status: Offline Thanks Meter: 1	what is the difference between Samsung t100 and t108? What is the difference between t100 and t108? Thanx

09-25-2002, 16:35	#4 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	Hi ptodic The Differances between T100 and T108 are quite a few, Number one being able to receive text reports when you send a message as this is not available to pay as you go customers, also you have a real cool feature of having an answering machine built into the phone so you wont have to pay anyone to retreive your voice mail anymore. Yes odyssey I think you are correct this is a china phone but I beleive it has the english language and t9 dictionary but of course this is what I am asking so I could be wrong. regards Charlie Last edited by Charly; 09-25-2002 at 16:46.

09-26-2002, 21:12	#7 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	Hi acyl2000 & Bert I have sent you both an email mates again any help would be appreciated. regards Charlie Last edited by Charly; 09-27-2002 at 01:36.

09-27-2002, 22:06	#10 (permalink)
gsmfun No Life Poster Join Date: Oct 1999 Location: Shenzhen, Hong Kong, Bangkok Posts: 2,183 Member: 611 Status: Offline Sonork: 100.33333 Thanks Meter: 29,604	Wintdn Using WinTdn to flash the phone will be ok. Select Binary + Ogm. If can't flash complete just need to charge ur battery full. If phone dead don't worry, just flash axf first and then ogm.

09-25-2002, 16:33	#3 (permalink)
odyssey Freak Poster Join Date: Apr 2001 Location: Kazakhstan Age: 41 Posts: 463 Member: 4374 Status: Offline Thanks Meter: 9	I think T108 it`s china phone

09-26-2002, 12:19	#5 (permalink)
GURO Freak Poster Join Date: Jul 2001 Age: 48 Posts: 325 Member: 5375 Status: Offline Thanks Meter: 1	I do not know how upgrade t100 with t108 because never seen t108 flash file yet but I have downgrade t108 to t100 withouth any problem ounly I unchek chek checksum in tulbox4.0 and all was ok

09-26-2002, 12:42	#6 (permalink)
*acyl2000* Super Moderator Join Date: Aug 2000 Location: Malaysia Posts: 2,809 Member: 1922 Status: Offline Sonork: 100.64645 Thanks Meter: 692	if you need the T108 flash file just contact me

09-27-2002, 09:03	#8 (permalink)
*acyl2000* Super Moderator Join Date: Aug 2000 Location: Malaysia Posts: 2,809 Member: 1922 Status: Offline Sonork: 100.64645 Thanks Meter: 692	Charly & DABOSS login your mailbox plz

09-27-2002, 11:22	#9 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	Cheers acyl2000 thanks for the file mate, Does anyone have any info on how to flash T100 safely Eg: what software to flash with and with what options selected ect also will I need any form of Checksum at the end Ie: JIG box again any help would be appreciated. Regards Charlie

09-27-2002, 22:39	#11 (permalink)
maher_teamoo Freak Poster Join Date: Jun 2002 Age: 41 Posts: 191 Member: 13384 Status: Offline Thanks Meter: 0	@i have done that but i done that but when i finish it says that cheksums is bad

09-29-2002, 18:29	#12 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	hi all OK thanks to all who have helped in this thread, I think I have everything I require but is there no checksums to calculate after flashing, and if there is how do I calculate if I dont have a JIG box or is there no security checksums in flash, if I need JIG box then I will aquire it but I would rather know before I attempt it. ANY BODY KNOW PLEASE! regards charlie PS Any one know how to check/workout what firmware you have in phone if you type #8888# it gives you lots of figures eg: T100 05.05 MP 27.00 but what the hell does this mean. Last edited by Charly; 09-29-2002 at 18:55.*

09-29-2002, 19:27	#13 (permalink)
gsmfun No Life Poster Join Date: Oct 1999 Location: Shenzhen, Hong Kong, Bangkok Posts: 2,183 Member: 611 Status: Offline Sonork: 100.33333 Thanks Meter: 29,604	#9999# Using #9999# check the version of sw for All Samsung phones.

09-30-2002, 00:04	#14 (permalink)
Charly No Life Poster Join Date: Sep 2000 Location: UK York Age: 56 Posts: 730 Member: 2008 Status: Offline Thanks Meter: 4	Hi and thanks all Cheers GSMFUN thanks for the help mate works super as 108 mate #9999# works on t108 but on t100 its #8888# PS: is there any software that can read the samsung flash out off the mobile before we upgrade. Regards Charlie

09-30-2002, 21:32	#15 (permalink)
skedone No Life Poster Join Date: Dec 2001 Location: 127.0.0.0.1 Posts: 849 Member: 8133 Status: Offline Thanks Meter: 72	@charly did you flash/upgrade the phone and if so what flash did u use and what did u use to calc checksums?? also what were the differennces thanks in advance

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
T100 & T108	manuuu	Samsung (USB-Smart)	0	03-12-2006 18:57
t100 to t108 flash file	kasra_eminem	VLSI, Conexant, Skyworks and Old Models	0	09-20-2003 13:45
T100 to T108	fiereetiger	VLSI, Conexant, Skyworks and Old Models	2	05-04-2003 23:48
Samsung T100 to T108 and back again...	Nick-A	VLSI, Conexant, Skyworks and Old Models	5	02-15-2003 03:34
samsung t100 to t108 upgrade	t68	VLSI, Conexant, Skyworks and Old Models	1	10-24-2002 00:14