no Log on MW3026 - GSM-Forum

Burnt Cobba · 05-30-2002, 01:45

trying to log an MW3026

after 4 dots show up.... timeout is displayed

i can read phoen info ok but no log

am using version 4 of the logger

what else i can do in this one mates? (except trash it )

br
alv

razvanelgsm · 05-30-2002, 02:11

Hi my friend
This sagem is new version with field 191 protected,
so logger not work... very expeansive solution.

best
razvanelgsm

Burnt Cobba · 05-30-2002, 03:26

hi Raz how are u old mate?

hard luck then

take care mate

c u online
br
alv

05-30-2002, 04:14

Maybe you need to change value in field 147 - if you have speed set to 38400, logger wont work.

Batgoy · 05-30-2002, 04:38

Hi,
Logger read info, but not read log and says "Timeout...". If speed is more high from 38400, info read will be or not?
BR
Batgoy

razvanelgsm · 05-30-2002, 04:50

Try to read field 191 with sagem dr using all speeds
if field can't be read than is new version, logger not work

best
razvanelgsm

Burnt Cobba · 05-30-2002, 06:18

already tried that Raz

the mofo wont be read... i jsut learnt that it is infact one of the new versions

but i could read the info just not log it

hard luck.. seems ths one will stay as it is

laters all mates
and thanks for the help
alv

XIII · 05-30-2002, 15:20

i had this problem with my MW3026... logger doesn t work.

But i could read field 191 with sagemdr. i have made my log exactly as logger do.

good luck

XIII

sorry for my bad english

mr_x4you · 05-31-2002, 15:40

Can't this be downgraded like 922 ?
But we need bis file !

razvanelgsm · 05-31-2002, 15:53

I think can be if will have bis file.

best
razvanelgsm

micmac · 05-31-2002, 19:27

hi

i have this pb but i success to read phone id with mw_bootstrap_tool and field 0 but can not read field 191 and 251.
i try it with all speed but not success
any solution for this pb.

Burnt Cobba · 05-31-2002, 19:35

i am in same position too

no matter what i try wont give the damn value

br to all mates
alv

razvanelgsm · 05-31-2002, 19:59

Micmac, give ID, field 0, hash nr. and i will give u
unlock code

best
razvanelgsm

micmac · 05-31-2002, 20:34

hi

i try it to change speed in sag doc at 4800

i can read field 0 but no field 191, 251

i can't read id with mw_bootstrap tool v1.0

always this message :

read 104 bytes of code (requested: 104
Sending 0x55 periodically (1ms), waiti
Turn on phone now...

03 00 10 01 00 00 00 01 NULL
03 00 10 00 00 00 00 68 Code
03 00 00 00 00 00 00 02 NULL
FF FF FF FF 00 00 00 00 NULL
Waiting for the acknowledge byte (0xEF
<
Error while loading code
Press any key to return to main menu.

micmac · 05-31-2002, 20:35

hash table is 28

read info is this

210453678903 DJ3,5D: 040202 1533 ; IMEI: 350747351939)15

05-30-2002, 01:45	#1 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	no Log on MW3026 trying to log an MW3026 after 4 dots show up.... timeout is displayed i can read phoen info ok but no log am using version 4 of the logger what else i can do in this one mates? (except trash it ) br alv

05-30-2002, 02:11	#2 (permalink)
razvanelgsm Freak Poster Join Date: Sep 2001 Location: Cluj, Romania Age: 47 Posts: 204 Member: 6119 Status: Offline Thanks Meter: 0	New version Hi my friend This sagem is new version with field 191 protected, so logger not work... very expeansive solution. best razvanelgsm

05-30-2002, 04:38	#5 (permalink)
Batgoy Freak Poster Join Date: Feb 2001 Location: Tazmania Posts: 270 Member: 3272 Status: Offline Thanks Meter: 1	to Legija Hi, Logger read info, but not read log and says "Timeout...". If speed is more high from 38400, info read will be or not? BR Batgoy

05-30-2002, 15:20	#8 (permalink)
XIII Junior Member Join Date: May 2002 Location: paris FRANCE Posts: 1 Member: 12359 Status: Offline Thanks Meter: 0	try to make log manually i had this problem with my MW3026... logger doesn t work. But i could read field 191 with sagemdr. i have made my log exactly as logger do. good luck XIII sorry for my bad english

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FREE SIM all BB5 Unlocking with No Tp, No Codes, No logs, No Risk, FREE SIM !!!	miliky	Main Sales Section	0	01-27-2008 21:34
N95 Hammer, based on an ideea of Dejan, no internet, no pc, no logs	Raskal	Main Sales Section	0	07-27-2007 18:26
log for mw3026	espoir1	Phone Unlocking Codes & Maps	2	01-22-2003 23:07
can someone here unlock or at least read log on mw3026 load a game	comiter	Infineon C16X M51 & ARM7 M52 BASED	0	04-02-2002 02:27

05-30-2002, 03:26	#3 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	hi Raz how are u old mate? hard luck then take care mate c u online br alv

05-30-2002, 04:14	#4 (permalink)
legija Guest Posts: n/a Member:	Maybe you need to change value in field 147 - if you have speed set to 38400, logger wont work.

05-30-2002, 04:50	#6 (permalink)
razvanelgsm Freak Poster Join Date: Sep 2001 Location: Cluj, Romania Age: 47 Posts: 204 Member: 6119 Status: Offline Thanks Meter: 0	Try to read field 191 with sagem dr using all speeds if field can't be read than is new version, logger not work best razvanelgsm

05-30-2002, 06:18	#7 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	already tried that Raz the mofo wont be read... i jsut learnt that it is infact one of the new versions but i could read the info just not log it hard luck.. seems ths one will stay as it is laters all mates and thanks for the help alv

05-31-2002, 15:40	#9 (permalink)
mr_x4you No Life Poster Join Date: Jun 2001 Location: x Posts: 3,295 Member: 4989 Status: Offline Thanks Meter: 13	Can't this be downgraded like 922 ? But we need bis file !

05-31-2002, 15:53	#10 (permalink)
razvanelgsm Freak Poster Join Date: Sep 2001 Location: Cluj, Romania Age: 47 Posts: 204 Member: 6119 Status: Offline Thanks Meter: 0	I think can be if will have bis file. best razvanelgsm

05-31-2002, 19:27	#11 (permalink)
micmac No Life Poster Join Date: Mar 2002 Location: tunis,tunisia Age: 48 Posts: 1,450 Member: 10396 Status: Offline Thanks Meter: 32	hi i have this pb but i success to read phone id with mw_bootstrap_tool and field 0 but can not read field 191 and 251. i try it with all speed but not success any solution for this pb.

05-31-2002, 19:35	#12 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	i am in same position too no matter what i try wont give the damn value br to all mates alv

05-31-2002, 19:59	#13 (permalink)
razvanelgsm Freak Poster Join Date: Sep 2001 Location: Cluj, Romania Age: 47 Posts: 204 Member: 6119 Status: Offline Thanks Meter: 0	Micmac, give ID, field 0, hash nr. and i will give u unlock code best razvanelgsm

05-31-2002, 20:34	#14 (permalink)
micmac No Life Poster Join Date: Mar 2002 Location: tunis,tunisia Age: 48 Posts: 1,450 Member: 10396 Status: Offline Thanks Meter: 32	hi i try it to change speed in sag doc at 4800 i can read field 0 but no field 191, 251 i can't read id with mw_bootstrap tool v1.0 always this message : read 104 bytes of code (requested: 104 Sending 0x55 periodically (1ms), waiti Turn on phone now... 03 00 10 01 00 00 00 01 NULL 03 00 10 00 00 00 00 68 Code 03 00 00 00 00 00 00 02 NULL FF FF FF FF 00 00 00 00 NULL Waiting for the acknowledge byte (0xEF < Error while loading code Press any key to return to main menu.

05-31-2002, 20:35	#15 (permalink)
micmac No Life Poster Join Date: Mar 2002 Location: tunis,tunisia Age: 48 Posts: 1,450 Member: 10396 Status: Offline Thanks Meter: 32	hash table is 28 read info is this 210453678903 DJ3,5D: 040202 1533 ; IMEI: 350747351939)15