5.00 beta4

[marcinw]

If you have problems with it, please report...

[Yoda_Brno]

Flashing OK, PMM manager (phone off, normal, local, test) : load from file > select all > write to phone > click YES > Warning ERROR. SELF TEST (phone off, normal, local, test) : Run All Now > no response from UI (nothing happens) Get results > no response from UI (nothing happens). Close working :O)))) but another opening Self Tests function it writes:
Detecting dongle
Dongle OK.
Can not open serial device COM1
It can be unavailable in this PC or busy also with phone off, T, L, N, connected or unconnected.
Vibra test, lights test, working

[marcinw]

Originally Posted by Yoda_Brno

Flashing OK, PMM manager (phone off, normal, local, test) : load from file > select all > write to phone > click YES > Warning ERROR. SELF TEST (phone off, normal, local, test) : Run All Now > no response from UI (nothing happens) Get results > no response from UI (nothing happens). Close working :O)))) but another opening Self Tests function it writes:
Detecting dongle
Dongle OK.
Can not open serial device COM1
It can be unavailable in this PC or busy also with phone off, T, L, N, connected or unconnected.
Vibra test, lights test, working

1. what system, what pc, what phone ?

2. did you tried writing pmm again ? was reading pmm working ok ?

3. what about vibra tuning ?

[Yoda_Brno]

Athlon @ 650 mhz, 128 mb ram, s3 vga

Running and testing on WIN98 and win2k.

vibra tuning working PERFECT lights tests OK, vibra tests OK, reading *.pm working OK. I am unable to load the file back from the sam phone, also downloaded PM files I have tried it more than twice. It shows Warning ERROR window >>this>> http://www.volny.cz/rastasp/lol.jpg . tested on 6310i, 6310, 8310. PM writing in Koci`s revolution SW ( if it help U, if U are using same source code :O) ) to n-gage (demo without a menu) was OK

After vibra tuning COM stayed open i thing. If I want after vibra tuning or another test or function L, N, T, PowOn, Reset, port is already open and unusable. >>
Can not open serial device COM1
It can be unavailable in this PC or busy
I have to restart UI

I Will test it today evening on Athlon @ 1.8 GHZ - win2k and Athlon @ 2.3 GHZ - XP.. I will post to you

[marcinw]

Originally Posted by Yoda_Brno

Athlon @ 650 mhz, 128 mb ram, s3 vga

Running and testing on WIN98 and win2k.

vibra tuning working PERFECT lights tests OK, vibra tests OK, reading *.pm working OK. I am unable to load the file back from the sam phone, also downloaded PM files I have tried it more than twice. It shows Warning ERROR window >>this>> http://www.volny.cz/rastasp/lol.jpg . tested on 6310i, 6310, 8310. PM writing in Koci`s revolution SW ( if it help U, if U are using same source code :O) ) to n-gage (demo without a menu) was OK

After vibra tuning COM stayed open i thing. If I want after vibra tuning or another test or function L, N, T, PowOn, Reset, port is already open and unusable. >>
Can not open serial device COM1
It can be unavailable in this PC or busy
I have to restart UI

I Will test it today evening on Athlon @ 1.8 GHZ - win2k and Athlon @ 2.3 GHZ - XP.. I will post to you

1.well, from my sources I know, that source in 5.00 is 90% new. Serial is 100% new. This is NOT Koci source. Because of it there are some issues and bugs. New programmes want to make good support for box, but you know - there is so much to do in so short time and... THX for patience.

2.Setting PMM, vibra tuning and self tests will be checked. We will see, if problems are is connected with used PC (you reports from other Athlons).

[pepos]

Originally Posted by Yoda_Brno

Flashing OK, PMM manager (phone off, normal, local, test) : load from file > select all > write to phone > click YES > Warning ERROR. SELF TEST (phone off, normal, local, test) : Run All Now > no response from UI (nothing happens) Get results > no response from UI (nothing happens). Close working :O)))) but another opening Self Tests function it writes:
Detecting dongle
Dongle OK.
Can not open serial device COM1
It can be unavailable in this PC or busy also with phone off, T, L, N, connected or unconnected.
Vibra test, lights test, working

be precise correspond Youda test for 7250i configuration 2.4Gh Intell 512/400 ram

[opelastra16i]

For me beta 4 not working :-( Dongle detected but nothing happens if I press any button. System : xp2800+ Asus A7n8x 1GB Ram Winxp (with last update)

[marcinw]

Originally Posted by opelastra16i

For me beta 4 not working :-( Dongle detected but nothing happens if I press any button. System : xp2800+ Asus A7n8x 1GB Ram Winxp (with last update)

Set correct serial port in settings, enable phone with Power On and... what now ?

[opelastra16i]

Ok, if I press Power on button, phone gets in local mode, but can´t read or do any Phone tests, if I press Read in Menü Identification, all Buttons get grey and I have to restart Program, sometimes I can press button again, but no info is shown. And can´t get to test or normal mode.
Tried com1 and com2, both same. Tested with 8310 and 6310i

[Yoda_Brno]

Originally Posted by opelastra16i

Ok, if I press Power on button, phone gets in local mode, but can´t read or do any Phone tests, if I press Read in Menü Identification, all Buttons get grey and I have to restart Program, sometimes I can press button again, but no info is shown. And can´t get to test or normal mode.
Tried com1 and com2, both same. Tested with 8310 and 6310i

Only FLASHING - file select+variant select, cp flashing, PM manager (reading), vibra tuning, lights test, vibra test,changing phone mode (L, T, N) Is availiable in beta4. Not working reading phone info, self tests, simlock clear, and other crossed buttons.