Cannot get Matrix work with 3rd party software - GSM-Forum

lc5829 · 01-22-2004, 23:59

Would like to ask for some help on getting matrix work with Noktool, Rolis, and for example B-Phreaks Eeprom Tools. None of the mentioned softwares will work for me.
Any help is greatly appreciated!

Regards

krab · 01-24-2004, 13:40

Quote:

Originally Posted by lc5829

Would like to ask for some help on getting matrix work with Noktool, Rolis, and for example B-Phreaks Eeprom Tools. None of the mentioned softwares will work for me.
Any help is greatly appreciated!

Regards

-switch box to dct4 mode
-connect phone
-power on phone, if phone dosent goes power on /bat+ LED on box must lighting/ then power it via DCT3matrix software
-then f/mbus comunication could be started without problem

have a nice day

Mastah-GSi · 01-27-2004, 17:37

When you want to work work with third party software you have to switch the switch to DCT3.

In this way you can work with 3rd party software.

lc5829 · 01-28-2004, 01:46

My box doesn't have a switch. I know there are pins on the PCB for the switch. Which position is which? I mean when do I short the 2 pins? But to tell the truth I tried it shorted, and unsorted but still no luck with 3rd party softs. Any other ideas?

BR

fgl30 · 01-28-2004, 12:58

http://forum.gsmhosting.com/vbb/showthread.php?t=111604

01-22-2004, 23:59	#1 (permalink)
lc5829 Freak Poster Join Date: Dec 2002 Location: Zooropa Age: 41 Posts: 489 Member: 18832 Status: Offline Thanks Meter: 18	Cannot get Matrix work with 3rd party software Would like to ask for some help on getting matrix work with Noktool, Rolis, and for example B-Phreaks Eeprom Tools. None of the mentioned softwares will work for me. Any help is greatly appreciated! Regards

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SST v 7.59 -fixed driver problem caused by 3rd party software	SST-GSM	SST-Dongle	9	09-15-2013 17:14
Samsung Dead Boot with 3rd party solutions, success/failure stories HERE !!!	Mr.Fl@sher	QUALCOMM Models (3G)	112	04-02-2012 15:22
how can we add 3rd party software and how work?	renaissa	CPF-BOX Ⅱ	1	07-18-2008 00:54
Favorite 3rd party software with MySQL	MySQLGeek	UST Pro II	0	12-21-2007 14:15
how to get griffin work with c62 unlock ?	hoangminhtam	Griffin	3	06-07-2004 09:52

01-27-2004, 17:37	#3 (permalink)
Mastah-GSi Freak Poster Join Date: Jul 2003 Location: Enschede, Netherlands Age: 40 Posts: 415 Member: 34652 Status: Offline Thanks Meter: 5	When you want to work work with third party software you have to switch the switch to DCT3. In this way you can work with 3rd party software.

01-28-2004, 01:46	#4 (permalink)
lc5829 Freak Poster Join Date: Dec 2002 Location: Zooropa Age: 41 Posts: 489 Member: 18832 Status: Offline Thanks Meter: 18	My box doesn't have a switch. I know there are pins on the PCB for the switch. Which position is which? I mean when do I short the 2 pins? But to tell the truth I tried it shorted, and unsorted but still no luck with 3rd party softs. Any other ideas? BR

01-28-2004, 12:58	#5 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,357 Member: 27881 Status: Offline Thanks Meter: 11	http://forum.gsmhosting.com/vbb/showthread.php?t=111604