Dejan 1.00b interface & Revolution - GSM-Forum

MiH · 11-10-2003, 14:58

How to use 3th party SW with built in Dejan 1.00b interface in matrix revolution like kNock, Rolis... I tryed it, but not work for me. I don't have any manual DCT3/4 switch in my new matrix revolution.

Thanks

jboy · 11-10-2003, 15:26

If you have switch in front panel of your box, just put it down and use 3th party software (Knock, Rolis, etc...)
BR

MiH · 11-10-2003, 15:46

No I haven't any switch in front panel

PhantomGSM · 11-10-2003, 16:35

thier should be a DCT3/DCT4 switch on the front of the box

Mines has one anyway lol

Regards

sergioems · 11-10-2003, 17:22

if not a switch i think you dont have a matrix box!

fgl30 · 11-10-2003, 17:29

@MiH,

if you open the box, you´ll see a little white connector with 2 terminals. You can get a terminal and a switch and plug in.
Is a cheap material and you can get it in any eletronic store.

Any difficulte, just let me know

MiH · 11-11-2003, 08:56

@ sergioems:
Yes, it is original direct from Koci.

@ fgl30:
I can't find any white terminal on my PCB. As you can see...

fgl30 · 11-11-2003, 11:41

@MiH,

sorry, seems your PCB is a little different from mine........ Can you, please, make a up (center) photo?

B,R

Executer · 11-11-2003, 13:58

There are two points on the pcb in the red circle. Just connect a switch and 2 wires!

MiH · 11-11-2003, 14:30

Thanks for info. I tryed it, Dejan doesn't work again, but now appear error respond at least. It seems my box is faulty, DCT4 phones can't be unlocked or readed, always just "Please wait, entering Local mode" and nothing else. Flashing DCT3 phones is work correctly.

Thanks

fgl30 · 11-11-2003, 14:38

Are you putting phone in local mode?

Also check your cables.......maybe cable fault........

MiH · 11-11-2003, 14:46

Yes, phones display "Local mode", but program still "Please wait, entering Local mode"...
Unfortunately I don'd have pinout for any cable. I need check 3510 cable at least.

fgl30 · 11-11-2003, 16:01

try push 'power on' and them push 'L'.......... sometimes work....

needi · 11-19-2003, 02:33

well i have the same problemmmm.....phones enters local mode and soft displays.....please wait entering local mode........and then nothing.But it is working ok with dct3 .please help if someone knows.

mr_x4you · 11-19-2003, 07:39

Use latest exe file from Matrix support page, as older version worked on COM1 only, no matter what com you choose for comunication

11-10-2003, 14:58	#1 (permalink)
MiH Freak Poster Join Date: Dec 2002 Location: slovakia Age: 48 Posts: 259 Member: 18876 Status: Offline Thanks Meter: 27	Dejan 1.00b interface & Revolution How to use 3th party SW with built in Dejan 1.00b interface in matrix revolution like kNock, Rolis... I tryed it, but not work for me. I don't have any manual DCT3/4 switch in my new matrix revolution. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dejan 1.00b to Dejan 1.04 convertor	Lead	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	02-21-2002 12:28
Dejan 1.00b to WinTesla flash converter	Lead	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	02-21-2002 02:27
Dejan 1.00b source code?	G-Man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	11-16-2001 18:16
Unlock 3330 V 3.12 with Dejan 1.00b	JeeDee01	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	10-13-2001 19:19
Flash status error! dejan 1.00b	Zianna	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-29-2001 16:58

11-10-2003, 15:26	#2 (permalink)
jboy Freak Poster Join Date: May 2002 Location: B&H, Australia Posts: 243 Member: 11715 Status: Offline Thanks Meter: 5	If you have switch in front panel of your box, just put it down and use 3th party software (Knock, Rolis, etc...) BR

11-10-2003, 15:46	#3 (permalink)
MiH Freak Poster Join Date: Dec 2002 Location: slovakia Age: 48 Posts: 259 Member: 18876 Status: Offline Thanks Meter: 27	No I haven't any switch in front panel

11-10-2003, 16:35	#4 (permalink)
PhantomGSM No Life Poster Join Date: Feb 2002 Location: Scotland, UK Posts: 1,480 Member: 9719 Status: Offline Thanks Meter: 4	thier should be a DCT3/DCT4 switch on the front of the box Mines has one anyway lol Regards

11-10-2003, 17:22	#5 (permalink)
sergioems No Life Poster Join Date: Feb 2002 Location: Portugal- Center of Europe Age: 42 Posts: 1,244 Member: 9502 Status: Offline Thanks Meter: 9	if not a switch i think you dont have a matrix box!

11-10-2003, 17:29	#6 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,357 Member: 27881 Status: Offline Thanks Meter: 11	@MiH, if you open the box, you´ll see a little white connector with 2 terminals. You can get a terminal and a switch and plug in. Is a cheap material and you can get it in any eletronic store. Any difficulte, just let me know

11-11-2003, 08:56	#7 (permalink)
MiH Freak Poster Join Date: Dec 2002 Location: slovakia Age: 48 Posts: 259 Member: 18876 Status: Offline Thanks Meter: 27	@ sergioems: Yes, it is original direct from Koci. @ fgl30: I can't find any white terminal on my PCB. As you can see...

11-11-2003, 11:41	#8 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,357 Member: 27881 Status: Offline Thanks Meter: 11	@MiH, sorry, seems your PCB is a little different from mine........ Can you, please, make a up (center) photo? B,R

11-11-2003, 14:30	#10 (permalink)
MiH Freak Poster Join Date: Dec 2002 Location: slovakia Age: 48 Posts: 259 Member: 18876 Status: Offline Thanks Meter: 27	Thanks for info. I tryed it, Dejan doesn't work again, but now appear error respond at least. It seems my box is faulty, DCT4 phones can't be unlocked or readed, always just "Please wait, entering Local mode" and nothing else. Flashing DCT3 phones is work correctly. Thanks

11-11-2003, 14:38	#11 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,357 Member: 27881 Status: Offline Thanks Meter: 11	Are you putting phone in local mode? Also check your cables.......maybe cable fault........

11-11-2003, 14:46	#12 (permalink)
MiH Freak Poster Join Date: Dec 2002 Location: slovakia Age: 48 Posts: 259 Member: 18876 Status: Offline Thanks Meter: 27	Yes, phones display "Local mode", but program still "Please wait, entering Local mode"... Unfortunately I don'd have pinout for any cable. I need check 3510 cable at least.

11-11-2003, 16:01	#13 (permalink)
fgl30 No Life Poster Join Date: May 2003 Posts: 1,357 Member: 27881 Status: Offline Thanks Meter: 11	try push 'power on' and them push 'L'.......... sometimes work....

11-19-2003, 02:33	#14 (permalink)
needi No Life Poster Join Date: Dec 2002 Location: Near phones Age: 46 Posts: 1,154 Member: 18303 Status: Offline Thanks Meter: 3	well i have the same problemmmm.....phones enters local mode and soft displays.....please wait entering local mode........and then nothing.But it is working ok with dct3 .please help if someone knows.

11-19-2003, 07:39	#15 (permalink)
mr_x4you Registered User Join Date: Jun 2001 Location: x Posts: 3,295 Member: 4989 Status: Offline Thanks Meter: 13	Use latest exe file from Matrix support page, as older version worked on COM1 only, no matter what com you choose for comunication