1112 Contact Service - GSM-Forum

dragosgsm · 08-17-2006, 21:57

I've seen on the forum that you can unlock 1112 (v5.03) by flashing it with 1110 firmware v3.42.I had succeded,The phone went unlocked but imediatly I had restarted the phone I've seen CONTACT SERVICE.I had tried EVREYTHIND with HWK and JAF,downgrading,updating with all firmware,I har rewrited the original PM(because I had made a beakup before).The phone is new and I am 100000000000% that is a software problem!!!
I don't know what a **** is with these phones can anyone help??????

Pls help UFS team,we need your help!!!!!!!!!!!!!!!!!!

jaaja · 08-20-2006, 07:25

ope we do as as1110 just upload a good pm and unlock thats all ve repaird 3 pc like that seach for pm in this forum

.::koolfriend4u::. · 10-09-2006, 13:36

hai frnd,
im also facing d same prblm...1112 n contact service mode...now i flashd d phone wth versn 5.53...d problm still d same...could anyone post me d good pm to slove my prblm??!!

hcomp · 10-09-2006, 21:26

Quote:

Originally Posted by BHARATHRAVI

hai frnd,
im also facing d same prblm...1112 n contact service mode...now i flashd d phone wth versn 5.53...d problm still d same...could anyone post me d good pm to slove my prblm??!!

erase the phone thin flash it and write pm

goooooooooood luck

dragosgsm · 10-09-2006, 21:48

Problem solved:
1.full erase
2.make full flash with 1110 sofware(mcu+ppm+pm) v3.42
3.UI Settings
4.phone OK,enjoy
It is full of bugs but it s better then a locked phone or ContactService

humbedj · 10-19-2006, 23:17

i try to flash a 112 with the 1110 v3.42 and,, first i erase the flash,, but when start flashing,, stop the proceess and say the follow error

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
Algorithm: u_amd.fia, Ver: 4.55.0
Faid Error: Not Rdy
Error Data1:
00000000: 9F 03 02 01 00 EC 22 68 00 00 01 21 10 00 02 00 ......"h...!....
00000010: 00 00 01 00 00 00 00 00 00 AD 7E B6 1A 1B BE 0B ..........~.....
00000020: E2 7D 58 6B E4 DB EE 65 14 27 00 00 00 00 00 00 .}Xk...e.'......
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Error Data2:
00000000: B3 72 72 22 68 00 00 01 21 10 00 02 00 00 00 01 .rr"h...!.......
00000010: 00 00 00 00 00 00 AD 7E B6 1A 1B BE 0B E2 7D 58 .......~......}X
00000020: 6B E4 DB EE 65 14 27 D3 72 00 00 00 00 00 00 00 k...e.'.r.......
00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Before taking screenshot, expand this window !
Process Failed, Repowering Mobile

now the phone is dead !!!

i can flash again,, but the same error

any help

humbedj · 10-19-2006, 23:27

I erase the phone again,, with the ERASE option and now i can flash the phone but... not power ON .. this is the procedure

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
Algorithm: u_amd.fia, Ver: 4.55.0
Algorithm Ok, MSID: 840201B98175E01E7E5BED95FD
Decoded MSID: 3E4EBAEB-0001C9DD-AA000000
Encoded FAID: 13FD0DF0-433C1DB4-586D021F
Area1: 0x01000000-0x0100FFFF Erased, Time: 0:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 0:25
Area3: 0x013C0000-0x013EFFFF Erased, Time: 0:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 0:10
Area1: 0x011C0000-0x011CFFFF Erased, Time: 0:00
Area2: 0x011D0000-0x0137FFFF Erased, Time: 0:11
PPM Flashing Completed, Time: 0:09
Flashing Completed, Rebooting Mobile

See the Area4 and Area5 say OUT of CHIP BOUNDS

Any help Please ???

alif30 · 10-20-2006, 14:17

Quote:

Originally Posted by hcomp

erase the phone thin flash it and write pm

goooooooooood luck

Phone still contact service

humbedj · 10-20-2006, 16:02

any help the two phone continuous death

neokia · 10-20-2006, 16:05

just erase..
then flash...
ui setting
change imei

works 4 me

neokia · 10-20-2006, 16:11

Quote:

Originally Posted by humbedj

I erase the phone again,, with the ERASE option and now i can flash the phone but... not power ON .. this is the procedure

1st Boot Ok, DCT4, UPP: 2201
Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE
Algorithm: u_amd.fia, Ver: 4.55.0
Algorithm Ok, MSID: 840201B98175E01E7E5BED95FD
Decoded MSID: 3E4EBAEB-0001C9DD-AA000000
Encoded FAID: 13FD0DF0-433C1DB4-586D021F
Area1: 0x01000000-0x0100FFFF Erased, Time: 0:00
Area2: 0x01010000-0x013BFFFF Erased, Time: 0:25
Area3: 0x013C0000-0x013EFFFF Erased, Time: 0:01
Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds
Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds
MCU Flashing Completed, Time: 0:10
Area1: 0x011C0000-0x011CFFFF Erased, Time: 0:00
Area2: 0x011D0000-0x0137FFFF Erased, Time: 0:11
PPM Flashing Completed, Time: 0:09
Flashing Completed, Rebooting Mobile

See the Area4 and Area5 say OUT of CHIP BOUNDS

Any help Please ???

i think u must check yer cable or try to change yer cable

MihaiGsm2003 · 10-20-2006, 18:23

Quote:

Originally Posted by dragosgsm

I've seen on the forum that you can unlock 1112 (v5.03) by flashing it with 1110 firmware v3.42.I had succeded,The phone went unlocked but imediatly I had restarted the phone I've seen CONTACT SERVICE.I had tried EVREYTHIND with HWK and JAF,downgrading,updating with all firmware,I har rewrited the original PM(because I had made a beakup before).The phone is new and I am 100000000000% that is a software problem!!!
I don't know what a **** is with these phones can anyone help??????

Pls help UFS team,we need your help!!!!!!!!!!!!!!!!!!

Change display with 1110, flash with 1110 ver. 5.04, good pm of 1110, power on with sim, phone say "invalid sim", power off, power on phone say "contact service", power off, unlock and phone its alive again, but you have 1110 now

http://www.gsmforum.ro/forum/viewtop...?p=62864#62864

mobile star · 11-04-2006, 13:57

this is Sam K8S3215ETE flash no solution yet

eblaster101 · 11-26-2006, 14:00

use easy cable if your flashing fails

eblaster101 · 11-26-2006, 15:13

can someone upload another pm for 1112 this one fails to write at some sections

08-17-2006, 21:57	#1 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	1112 Contact Service I've seen on the forum that you can unlock 1112 (v5.03) by flashing it with 1110 firmware v3.42.I had succeded,The phone went unlocked but imediatly I had restarted the phone I've seen CONTACT SERVICE.I had tried EVREYTHIND with HWK and JAF,downgrading,updating with all firmware,I har rewrited the original PM(because I had made a beakup before).The phone is new and I am 100000000000% that is a software problem!!! I don't know what a **** is with these phones can anyone help?????? Pls help UFS team,we need your help!!!!!!!!!!!!!!!!!!

10-09-2006, 13:36	#3 (permalink)
.::koolfriend4u::. No Life Poster Join Date: Nov 2005 Posts: 1,478 Member: 200145 Status: Offline Sonork: 100.1596786 Thanks Meter: 677	hai im also facing d same problm hai frnd, im also facing d same prblm...1112 n contact service mode...now i flashd d phone wth versn 5.53...d problm still d same...could anyone post me d good pm to slove my prblm??!!

10-20-2006, 16:05	#10 (permalink)
neokia No Life Poster Join Date: Oct 2006 Posts: 515 Member: 366974 Status: Offline Thanks Meter: 31	Flash with 1112 files just erase.. then flash... ui setting change imei works 4 me

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1112 Contact Service 1112	kmshawon	Nokia Hardware & Hardware Repair	4	08-16-2008 14:49
1112 contact service after downgrade.	ales6orah	MT-BOX	14	04-13-2007 12:54
1110i/1112 Contact Service after latast version flash	MoiNKhulna	Nokia Digital Core Technology 4 ( DCT-4 )	9	12-14-2006 08:01
Any Solution 1112 Contact Service	gomi555	Nokia Digital Core Technology 4 ( DCT-4 )	9	12-09-2006 06:06
1112 contact service	usernome	Universalbox	10	10-09-2006 14:11

08-20-2006, 07:25	#2 (permalink)
jaaja Freak Poster Join Date: Jan 2005 Location: IVORYPLAZA HUM-GSM kampala Age: 41 Posts: 414 Member: 109428 Status: Offline Thanks Meter: 10	ope we do as as1110 just upload a good pm and unlock thats all ve repaird 3 pc like that seach for pm in this forum

10-09-2006, 21:48	#5 (permalink)
dragosgsm No Life Poster Join Date: May 2005 Location: Bacau Posts: 3,227 Member: 148032 Status: Offline Thanks Meter: 415	Problem solved: 1.full erase 2.make full flash with 1110 sofware(mcu+ppm+pm) v3.42 3.UI Settings 4.phone OK,enjoy It is full of bugs but it s better then a locked phone or ContactService

10-19-2006, 23:17	#6 (permalink)
humbedj No Life Poster Join Date: Nov 2005 Posts: 503 Member: 199538 Status: Offline Thanks Meter: 54	i try to flash a 112 with the 1110 v3.42 and,, first i erase the flash,, but when start flashing,, stop the proceess and say the follow error 1st Boot Ok, DCT4, UPP: 2201 Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE Algorithm: u_amd.fia, Ver: 4.55.0 Faid Error: Not Rdy Error Data1: 00000000: 9F 03 02 01 00 EC 22 68 00 00 01 21 10 00 02 00 ......"h...!.... 00000010: 00 00 01 00 00 00 00 00 00 AD 7E B6 1A 1B BE 0B ..........~..... 00000020: E2 7D 58 6B E4 DB EE 65 14 27 00 00 00 00 00 00 .}Xk...e.'...... 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Error Data2: 00000000: B3 72 72 22 68 00 00 01 21 10 00 02 00 00 00 01 .rr"h...!....... 00000010: 00 00 00 00 00 00 AD 7E B6 1A 1B BE 0B E2 7D 58 .......~......}X 00000020: 6B E4 DB EE 65 14 27 D3 72 00 00 00 00 00 00 00 k...e.'.r....... 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Before taking screenshot, expand this window ! Process Failed, Repowering Mobile now the phone is dead !!! i can flash again,, but the same error any help

10-19-2006, 23:27	#7 (permalink)
humbedj No Life Poster Join Date: Nov 2005 Posts: 503 Member: 199538 Status: Offline Thanks Meter: 54	I erase the phone again,, with the ERASE option and now i can flash the phone but... not power ON .. this is the procedure 1st Boot Ok, DCT4, UPP: 2201 Fl0: 0x01000000-0x013FFFFF,00EC2268,Sam K8S3215ETE Algorithm: u_amd.fia, Ver: 4.55.0 Algorithm Ok, MSID: 840201B98175E01E7E5BED95FD Decoded MSID: 3E4EBAEB-0001C9DD-AA000000 Encoded FAID: 13FD0DF0-433C1DB4-586D021F Area1: 0x01000000-0x0100FFFF Erased, Time: 0:00 Area2: 0x01010000-0x013BFFFF Erased, Time: 0:25 Area3: 0x013C0000-0x013EFFFF Erased, Time: 0:01 Area4: 0x017C0000-0x017EFFFF Out of Chip Bounds Area5: 0x01FC0000-0x01FEFFFF Out of Chip Bounds MCU Flashing Completed, Time: 0:10 Area1: 0x011C0000-0x011CFFFF Erased, Time: 0:00 Area2: 0x011D0000-0x0137FFFF Erased, Time: 0:11 PPM Flashing Completed, Time: 0:09 Flashing Completed, Rebooting Mobile See the Area4 and Area5 say OUT of CHIP BOUNDS Any help Please ???

10-20-2006, 16:02	#9 (permalink)
humbedj No Life Poster Join Date: Nov 2005 Posts: 503 Member: 199538 Status: Offline Thanks Meter: 54	any help the two phone continuous death

11-04-2006, 13:57	#13 (permalink)
mobile star Freak Poster Join Date: Feb 2004 Location: jordan Age: 47 Posts: 348 Member: 54916 Status: Offline Thanks Meter: 58	this is Sam K8S3215ETE flash no solution yet

11-26-2006, 14:00	#14 (permalink)
eblaster101 Freak Poster Join Date: Apr 2005 Age: 42 Posts: 312 Member: 136598 Status: Offline Thanks Meter: 3	use easy cable if your flashing fails

11-26-2006, 15:13	#15 (permalink)
eblaster101 Freak Poster Join Date: Apr 2005 Age: 42 Posts: 312 Member: 136598 Status: Offline Thanks Meter: 3	can someone upload another pm for 1112 this one fails to write at some sections