6600 no power on after flash help!!!!!!!!! - Page 2 - GSM-Forum

leroi · 02-18-2005, 18:58

hi
i manage for sending u want u need, connection speed is not better now u must wait for a moment 1 day max.
best regard
leroi

hansis · 02-18-2005, 19:05

Quote:

Originally Posted by leroi

hi
i manage for sending u want u need, connection speed is not better now u must wait for a moment 1 day max.
best regard
leroi

Hi

I think i just need ppm: nhl 103421.xx
i have mcu: nhl 103421-c3

----hansis----

***Gsm Lab*** · 02-19-2005, 12:12

first u download ersae flash file and u write the erase file mcu+ppm all is done and then u flash u r phone i think its 1005 ok good luck

hansis · 02-19-2005, 16:28

Quote:

Originally Posted by majid rocky

first u download ersae flash file and u write the erase file mcu+ppm all is done and then u flash u r phone i think its 1005 ok good luck

Hi

Have try don´t work phone still dead

----hansis----

leroi · 02-22-2005, 19:49

Originally Posted by leroi
hi
i manage for sending u want u need, connection speed is not better now u must wait for a moment 1 day max.
best regard
leroi

Hi

I think i just need ppm: nhl 103421.xx
i have mcu: nhl 103421-c3

----hansis----

i can't send it in this forum give me your mail please or send me a mail,my mail is ( [email protected])
best regard
leroi

hansis · 02-23-2005, 12:42

Quote:

Originally Posted by leroi

Originally Posted by leroi
hi
i manage for sending u want u need, connection speed is not better now u must wait for a moment 1 day max.
best regard
leroi

Hi

I think i just need ppm: nhl 103421.xx
i have mcu: nhl 103421-c3

----hansis----

i can't send it in this forum give me your mail please or send me a mail,my mail is ( [email protected])
best regard
leroi

My mail is [email protected]

----hansis----

leroi · 02-24-2005, 17:00

i have sending your file
please don't forget to post here if all is right

leroi

mohps7 · 02-24-2005, 20:11

Quote:

Originally Posted by majid rocky

first u download ersae flash file and u write the erase file mcu+ppm all is done and then u flash u r phone i think its 1005 ok good luck

how to write erase pmm+mcu with this file

best regards

hansis · 02-25-2005, 12:20

Quote:

Originally Posted by leroi

i have sending your file
please don't forget to post here if all is right

leroi

Hi

It don´t work phone still dead ??

1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,0001257E,Amd 29BDS643GT
Fl1: 0x02000000-0x027FFFFF,0001257E,Amd 29BDS643GT
Fl2: 0x04000000-0x047FFFFF,0001257E,Amd 29BDS643GT
Fl3: 0x06000000-0x067FFFFF,0001257E,Amd 29BDS643GT
Algorithm: w2_amd.fia, w2_cbusb.fia
Algorithm Ok, MSID: 84EF6E427620C1FD3562828FBE
Decoded MSID: 3E4EBAF7-00C986EC-A9000000
Encoded FAID: A217607E-D298A2CA-53E26A04
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:26
Area3: 0x04000000-0x046FFFFF Erased, Time: 01:13
Area4: 0x06000000-0x066BFFFF Erased, Time: 01:12
Area5: 0x047C0000-0x047EFFFF Erased, Time: 00:02
BT MCM (21) Image Found: 0x0002DD94
BT MCM Registering Done
MCU Flashing Completed, Time: 08:27
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02000000-0x0213FFFF Erased, Time: 00:13
PPM Flashing Completed, Time: 00:27
Flashing Completed, Rebooting Mobile
Init Test Mode Failed
IMEI: ---, ASIC:

----hansis----

mohps7 · 02-25-2005, 19:15

what hapen

no change for me too

is their another solution

best regards

shakeelajmal · 02-25-2005, 19:39

erase the full flash of phone (with erase button) , upload full flash (MCU+PPM+PM) and unlock your phone, it will be live again
By the way use the lastest flash files available and use the Eprom formating too if needed

BR
Shakeel

mohps7 · 02-25-2005, 21:09

Quote:

Originally Posted by shakeelajmal

erase the full flash of phone (with erase button) , upload full flash (MCU+PPM+PM) and unlock your phone, it will be live again
By the way use the lastest flash files available and use the Eprom formating too if needed

sorry
Eprom formating is it same with user area

telip · 02-25-2005, 23:01

Please read that http://www.ufs-3.org/pic/6600.html
or for french peoples on my website http://www.comdif.com/forum/viewtopic.php?t=11
make all step by step and be sure your 6600 will live again.
Important to set the speed as normal

detail in the SARAS dctx window
1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
Fl3: 0x06000000-0x067FFFFF,0001267E,Amd 29BDS643HT
Algorithm: w2_amd.fia, w2_cbusb.fia
Algorithm Ok, MSID: 84D6BE54DC1B6A0BBCB5993DA3
Decoded MSID: 3E4EBAF7-009F523A-A9000000
Encoded FAID: 49BF4046-DA20C862-C15ED5FF
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:06
Area3: 0x04000000-0x046FFFFF Erased, Time: 01:00
Area4: 0x06000000-0x066BFFFF Erased, Time: 00:56
Area5: 0x047C0000-0x047EFFFF Erased, Time: 00:01
BT MCM (21) Image Found: 0x0002DD94
BT MCM Registering Done
MCU Flashing Completed, Time: 10:18
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02000000-0x0213FFFF Erased, Time: 00:10
PPM Flashing Completed, Time: 00:33
Flashing Completed, Rebooting Mobile
All Done, Time: 14:46
Init Normal Mode Ok, Time: 00:56
Init Local Mode Ok, Time: 00:13
User Area Format Ok, Time: 00:56

hansis · 02-26-2005, 00:33

Quote:

Originally Posted by telip

Please read that http://www.ufs-3.org/pic/6600.html
or for french peoples on my website http://www.comdif.com/forum/viewtopic.php?t=11
make all step by step and be sure your 6600 will live again.
Important to set the speed as normal

detail in the SARAS dctx window
1st Boot Ok, WD2, UPP: 0082
Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT
Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT
Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT
Fl3: 0x06000000-0x067FFFFF,0001267E,Amd 29BDS643HT
Algorithm: w2_amd.fia, w2_cbusb.fia
Algorithm Ok, MSID: 84D6BE54DC1B6A0BBCB5993DA3
Decoded MSID: 3E4EBAF7-009F523A-A9000000
Encoded FAID: 49BF4046-DA20C862-C15ED5FF
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x007FFFFF Erased, Time: 01:06
Area3: 0x04000000-0x046FFFFF Erased, Time: 01:00
Area4: 0x06000000-0x066BFFFF Erased, Time: 00:56
Area5: 0x047C0000-0x047EFFFF Erased, Time: 00:01
BT MCM (21) Image Found: 0x0002DD94
BT MCM Registering Done
MCU Flashing Completed, Time: 10:18
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02000000-0x0213FFFF Erased, Time: 00:10
PPM Flashing Completed, Time: 00:33
Flashing Completed, Rebooting Mobile
All Done, Time: 14:46
Init Normal Mode Ok, Time: 00:56
Init Local Mode Ok, Time: 00:13
User Area Format Ok, Time: 00:56

I have try that but it don´t work phone can not Init Local Mode ??

----hansis----

mohps7 · 02-26-2005, 20:24

icant format user area

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Hardware Repair Series : 7210-6610 no power on after flash	GSM Coolhawk	Nokia Repair Guide and FAQ	86	06-27-2011 11:52
plz help 1110 no power on after flash	bruightmobile	Nokia Hardware & Hardware Repair	1	11-13-2009 06:17
help!!! 2610 no power on after flash with jaf	aaroncheung	Nokia Digital Core Technology 4 ( DCT-4 )	4	07-15-2008 18:22
help 6100 no power on after flash	Nokall	Nokia Hardware & Hardware Repair	9	12-23-2004 06:16
R520m no power ON after flash	pepik	Old Ericsson Phones & Sony Phones	0	08-26-2004 21:38

02-18-2005, 18:58	#16 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	hi i manage for sending u want u need, connection speed is not better now u must wait for a moment 1 day max. best regard leroi

02-19-2005, 12:12	#18 (permalink)
*Gsm Lab* Super Moderator Join Date: Feb 2005 Location: United Arab Emirates , Dubai Age: 38 Posts: 4,249 Member: 113928 Status: Offline Sonork: 100.111866 Thanks Meter: 1,838	first u download ersae flash file and u write the erase file mcu+ppm all is done and then u flash u r phone i think its 1005 ok good luck

02-22-2005, 19:49	#20 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	Originally Posted by leroi hi i manage for sending u want u need, connection speed is not better now u must wait for a moment 1 day max. best regard leroi Hi I think i just need ppm: nhl 103421.xx i have mcu: nhl 103421-c3 ----hansis---- i can't send it in this forum give me your mail please or send me a mail,my mail is ( [email protected]) best regard leroi

02-24-2005, 17:00	#22 (permalink)
leroi No Life Poster Join Date: Jan 2005 Age: 48 Posts: 906 Member: 107916 Status: Offline Thanks Meter: 30	i have sending your file please don't forget to post here if all is right leroi

02-25-2005, 19:15	#25 (permalink)
mohps7 Insane Poster Join Date: Aug 2004 Location: Bourouba Age: 41 Posts: 69 Member: 77242 Status: Offline Thanks Meter: 4	what hapen no change for me too is their another solution best regards

02-25-2005, 19:39	#26 (permalink)
shakeelajmal No Life Poster Join Date: Feb 2004 Location: PaKiStAn Age: 44 Posts: 1,865 Member: 51639 Status: Offline Thanks Meter: 76	erase the full flash of phone (with erase button) , upload full flash (MCU+PPM+PM) and unlock your phone, it will be live again By the way use the lastest flash files available and use the Eprom formating too if needed BR Shakeel

02-25-2005, 23:01	#28 (permalink)
telip Freak Poster Join Date: Jan 2005 Location: France Posts: 199 Member: 103520 Status: Offline Thanks Meter: 17	Please read that http://www.ufs-3.org/pic/6600.html or for french peoples on my website http://www.comdif.com/forum/viewtopic.php?t=11 make all step by step and be sure your 6600 will live again. Important to set the speed as normal detail in the SARAS dctx window 1st Boot Ok, WD2, UPP: 0082 Fl0: 0x00000000-0x007FFFFF,0001267E,Amd 29BDS643HT Fl1: 0x02000000-0x027FFFFF,0001267E,Amd 29BDS643HT Fl2: 0x04000000-0x047FFFFF,0001267E,Amd 29BDS643HT Fl3: 0x06000000-0x067FFFFF,0001267E,Amd 29BDS643HT Algorithm: w2_amd.fia, w2_cbusb.fia Algorithm Ok, MSID: 84D6BE54DC1B6A0BBCB5993DA3 Decoded MSID: 3E4EBAF7-009F523A-A9000000 Encoded FAID: 49BF4046-DA20C862-C15ED5FF Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area2: 0x00010000-0x007FFFFF Erased, Time: 01:06 Area3: 0x04000000-0x046FFFFF Erased, Time: 01:00 Area4: 0x06000000-0x066BFFFF Erased, Time: 00:56 Area5: 0x047C0000-0x047EFFFF Erased, Time: 00:01 BT MCM (21) Image Found: 0x0002DD94 BT MCM Registering Done MCU Flashing Completed, Time: 10:18 Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00 Area2: 0x02000000-0x0213FFFF Erased, Time: 00:10 PPM Flashing Completed, Time: 00:33 Flashing Completed, Rebooting Mobile All Done, Time: 14:46 Init Normal Mode Ok, Time: 00:56 Init Local Mode Ok, Time: 00:13 User Area Format Ok, Time: 00:56

02-26-2005, 20:24	#30 (permalink)
mohps7 Insane Poster Join Date: Aug 2004 Location: Bourouba Age: 41 Posts: 69 Member: 77242 Status: Offline Thanks Meter: 4	icant format user area