7280 and tornado :(
 

Hi

I was get this pb with nokia 7280 new one branded .. i was try flashing it

But stoped whene try write PPM so now phone dead and customer ask for

working phone :D

Any advice bout this pb ??

Regards . . :D

i have the same problem in 10 phones they go off and when try to power it blinking i flash the phonr with ufs3 and griffin same problem mcu flash ok and ppm stop at 50% it can be a bug of the soft or hardware problem

Its software BUG sure

Because my phone was work before its new one

And U say U try with 10pcs i dno't think its H/W pb :)

Regards . . :D

make sure the cable connect correctly also when flashing

Maybe is better to buy another box.. i have a 7280 too here for update software, after hear this.. maybe is better to use JAF :D

we wait for an update from griffin team and saras to correct this bug :(

J.A.F also give me error whene try flashing it . . i ty and won't work

? ? ? !

Regards . . :D

put yur simcard door with sim card while flashing it will work good

1st Boot Ok, TIKU, UPP: 1052
Fl0: 0x00000000-0x00FFFFFF,00EC22F8,Sam K8S2815ET
Fl1: 0x02000000-0x02FFFFFF,00EC0020,Sam NOR 16 Mb
Algorithm: te_oncsm.fia
Erasing Mass Memory
Erasing Error: MM_2B_5, 9D3040, Time: 00:00
Process Failed, Repowering Mobile


Same problem please help

in my opinion flash ic

I think it's not flash IC. so many phones with damaged flash IC? Worked phones?
I think we should wait ne fia files

i had simillar problems
i used griffin 2.088
phone revived but cp fails

ufs-twister same error
delete flash folder install new 3.19 fia

I had the same problem last 2 months, when UFS erased then flash MCU is well, but then it said that PPM and CNT image files were "BAD"???
But now you can make it easy by using Twister DTCX 1.3i and flash update 3.19 supplied by SARA Soft. you can search the WEB with key: "TwisterSuiteSetup_Update_v1.30.001" to download Twister DTCX 1.3i
Have a good day!

Try to install this Fia flash !!!!

hi

i have the same problem, MCU can flash but PPM and CNT will not. i also think this is a software bug, hopefully UFS team will repair soon.

reo