T610 help plz. - GSM-Forum

shakeeb · 08-15-2004, 16:46

hi
i have a problem with a SE t610 which doesnt seem to boot using the ufs2 flasher.
problem is that the phone reboots every minute and so i decided to flash it.
its not an RSA protected...

i cant get a secure boot ...

i got a secure boot only when i remove the battery and insert and so tills i got a boot..
when i try to flash the mod i get an error msg that mod flash writing failed : 0000
gdfs and mcu flashing gives another error : flash not known.

what can i do to solve this problem..i know that the source of this problem is a broken modem flash that stopped in the middle.
thanx

panadol · 08-15-2004, 17:25

HI what version you are using try with the latest RTP 26c.Check your phone version R4c is old no need test point and if R6c need test point.Good luck

shakeeb · 08-15-2004, 17:27

it is an r6c cda.
what is a test point and how to fix it?

panadol · 08-15-2004, 17:30

Download the manual tp and support are www.ufsx.com

shakeeb · 08-15-2004, 17:31

i cant access..i have access to tornadoflasher.net only

panadol · 08-15-2004, 17:42

Contact me i sent it to you.I try to upload here fail

shakeeb · 08-15-2004, 17:57

thank u panadol but as isaid its not rsa..problem is damaged mod flashing..any other help is appreciated

shakeeb · 08-16-2004, 00:06

ok........anyone else maybe?

jabran200 · 08-16-2004, 00:39

have u tried openiing it and checking fro porblems and try a different battery.

shakeeb · 08-16-2004, 08:18

yes i have...nothing is wrong with it.

jabran200 · 08-16-2004, 10:39

then try this it worked for me on a p800 open the fone remove any parts and connect the cable while it is opened and hold the battery in place and see if it flashes wrorked for a p800 that wouldn't flash for me.

Imran_Khatri · 08-16-2004, 22:35

Just use China2 MCU,MODEM and GDFS....All will be ok..

WBR
Imran khatri

shakeeb · 08-17-2004, 09:38

u dont seem to understand the whole point imran..the problem isnt with the flash files..its with the flash itself..ufs2 doesnt seem to see the flash ..it says its unkown..the FLASH not the FILES.

jabran200 · 08-18-2004, 00:26

did u try waht i sed? dismantle the fone completlry meaning remove all componets or disconnect like cameras vibarter just flash teh board and see how it goes worked for a p800 that always failed to flash it can't hurt to try.

Monkey_Zu · 09-10-2004, 01:10

try unticking "enable fast flashing". reflow ic's under keypad (but don't heat bluetooth module), reflow ic's under rf can above the sim reader.

any other ideas anyone??

08-15-2004, 16:46	#1 (permalink)
shakeeb Major Poster Join Date: Apr 2004 Age: 47 Posts: 46 Member: 64218 Status: Offline Thanks Meter: 0	T610 help plz. hi i have a problem with a SE t610 which doesnt seem to boot using the ufs2 flasher. problem is that the phone reboots every minute and so i decided to flash it. its not an RSA protected... i cant get a secure boot ... i got a secure boot only when i remove the battery and insert and so tills i got a boot.. when i try to flash the mod i get an error msg that mod flash writing failed : 0000 gdfs and mcu flashing gives another error : flash not known. what can i do to solve this problem..i know that the source of this problem is a broken modem flash that stopped in the middle. thanx

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6500c help plz	shahalom007	Nokia Hardware & Hardware Repair	2	03-29-2010 13:33
A2 Initializating file system error !! Cant customize !! Help plz	Dany	Universalbox	2	03-29-2010 12:35
N73 Product selection mismatch plz help plz help plz help	jayan_jayan	Nokia Hardware & Hardware Repair	4	03-17-2010 19:42
help plz dead T610	zigma300	FuriouS II	5	09-26-2005 20:35
T610- some help plz	Tim186	Sony Ericsson	3	12-25-2003 19:32

08-15-2004, 17:25	#2 (permalink)
panadol Freak Poster Join Date: Jul 2001 Location: nil Age: 48 Posts: 294 Member: 5291 Status: Offline Sonork: nil Thanks Meter: 7	HI what version you are using try with the latest RTP 26c.Check your phone version R4c is old no need test point and if R6c need test point.Good luck

08-15-2004, 17:27	#3 (permalink)
shakeeb Major Poster Join Date: Apr 2004 Age: 47 Posts: 46 Member: 64218 Status: Offline Thanks Meter: 0	it is an r6c cda. what is a test point and how to fix it?

08-15-2004, 17:30	#4 (permalink)
panadol Freak Poster Join Date: Jul 2001 Location: nil Age: 48 Posts: 294 Member: 5291 Status: Offline Sonork: nil Thanks Meter: 7	Download the manual tp and support are www.ufsx.com

08-15-2004, 17:31	#5 (permalink)
shakeeb Major Poster Join Date: Apr 2004 Age: 47 Posts: 46 Member: 64218 Status: Offline Thanks Meter: 0	i cant access..i have access to tornadoflasher.net only

08-15-2004, 17:42	#6 (permalink)
panadol Freak Poster Join Date: Jul 2001 Location: nil Age: 48 Posts: 294 Member: 5291 Status: Offline Sonork: nil Thanks Meter: 7	Contact me i sent it to you.I try to upload here fail

08-15-2004, 17:57	#7 (permalink)
shakeeb Major Poster Join Date: Apr 2004 Age: 47 Posts: 46 Member: 64218 Status: Offline Thanks Meter: 0	thank u panadol but as isaid its not rsa..problem is damaged mod flashing..any other help is appreciated

08-16-2004, 00:06	#8 (permalink)
shakeeb Major Poster Join Date: Apr 2004 Age: 47 Posts: 46 Member: 64218 Status: Offline Thanks Meter: 0	ok........anyone else maybe?

08-16-2004, 00:39	#9 (permalink)
jabran200 Freak Poster Join Date: Jun 2004 Posts: 295 Member: 68213 Status: Offline Thanks Meter: 1	have u tried openiing it and checking fro porblems and try a different battery.

08-16-2004, 08:18	#10 (permalink)
shakeeb Major Poster Join Date: Apr 2004 Age: 47 Posts: 46 Member: 64218 Status: Offline Thanks Meter: 0	yes i have...nothing is wrong with it.

08-16-2004, 10:39	#11 (permalink)
jabran200 Freak Poster Join Date: Jun 2004 Posts: 295 Member: 68213 Status: Offline Thanks Meter: 1	then try this it worked for me on a p800 open the fone remove any parts and connect the cable while it is opened and hold the battery in place and see if it flashes wrorked for a p800 that wouldn't flash for me.

08-16-2004, 22:35	#12 (permalink)
Imran_Khatri No Life Poster Join Date: Mar 2004 Location: Pakistan Age: 42 Posts: 1,416 Member: 56561 Status: Offline Sonork: 100.114006 Thanks Meter: 41	Just use China2 MCU,MODEM and GDFS....All will be ok.. WBR Imran khatri

08-17-2004, 09:38	#13 (permalink)
shakeeb Major Poster Join Date: Apr 2004 Age: 47 Posts: 46 Member: 64218 Status: Offline Thanks Meter: 0	u dont seem to understand the whole point imran..the problem isnt with the flash files..its with the flash itself..ufs2 doesnt seem to see the flash ..it says its unkown..the FLASH not the FILES.

08-18-2004, 00:26	#14 (permalink)
jabran200 Freak Poster Join Date: Jun 2004 Posts: 295 Member: 68213 Status: Offline Thanks Meter: 1	did u try waht i sed? dismantle the fone completlry meaning remove all componets or disconnect like cameras vibarter just flash teh board and see how it goes worked for a p800 that always failed to flash it can't hurt to try.

09-10-2004, 01:10	#15 (permalink)
Monkey_Zu Junior Member Join Date: Aug 2002 Location: Australia Age: 46 Posts: 33 Member: 15110 Status: Offline Thanks Meter: 0	try unticking "enable fast flashing". reflow ic's under keypad (but don't heat bluetooth module), reflow ic's under rf can above the sim reader. any other ideas anyone??