How to modify usb cables to flash MP4
 

hers some from thread for reading, formating and flashing a china phones using improvised usb cables:


http://i199.photobucket.com/albums/a.../Cable_MP4.jpg

http://i199.photobucket.com/albums/a.../China8Pin.jpg

Prepare:

-01 USB cable, that has USB to Virtual COM card, using PL-2303, ARK3116S, or C261 USB Cable, that you have it with driver( These cables packed with some kinds of phone)
-01 RJ-45 port, that you can buy at Computer service or from a discard LAN Card or Net switch, or box, PC mainboard...

Doing:

For easy to explain, I'll use PL-2303. And to take all advantage of UFS cable kit, we make all kind of phone self-made Cables following UFS standard, so that, we can use UFS cable with this Virsual COM, like C19x Moto, 2xx Sie, 4xx Sie...
Solder RX, TX, GND as this Picture:

http://i199.photobucket.com/albums/a...r/USBtoUFS.jpg

Note:

You need no to connect 1 and 8 (B+)! I do it, for UFS Nokia Cable only!

All done of the main part!
For the other part(Connect to phone part), you can use Connector from USB cable of the phone, Dead Charger to modify them, that fix the pinout of the phone you want to flash.

Note:

With MT6226x, Phone will not Power it on if you read and Write back that file to phone, but you must read! Some tools can repair that file, so that, they can revive your phone

2MROW, I'LL PREPARE FOR THE UPLOADING OF FLASHING PROGRAM AND TUTORIAL.


mind bulger
philippines

CHINA VS. PHILIPPINES

if did the flashing and programming turtorial let me know (amicO)....

its nice post thanks bro..............

LED blinks during flash!
 

:)thank you brother. does led in lan port blinks while flashing.