after flash 2650 phone dead - GSM-Forum

mroa · 04-15-2005, 09:29

I flash 2650 using twister flasher after it phone become dead

I can't flash it now I have error "Erasing Error: 10, at: 0x01000000-0x0100FFFF, 940207, Time: 00:00
"

what to do whit this nokia

BR

modzek · 04-15-2005, 09:48

Uninstal twistersuit , 2650 phinix pack instal twistersuit and again 2650 if no result uninstal all phinix pack and then reinstal twister suit. if no trye too on difrent version twistesuit.

b2k · 04-15-2005, 09:51

Or try other version of software

Sometimes it helps.

mroa · 04-15-2005, 09:53

I'll try all this solutions not work

still same problem

I think it's problem whit nokia not whit twister suite or flash coz I also can't erase flash and I can read info from phone

BR

modzek · 04-15-2005, 09:58

write step by step all proces. if you dowgrade flash use same flash as phone orginal.

i have this problem on 3220 v3.60 use new twister suit and will by ok.

Singh05 · 04-15-2005, 10:02

Erase full flash using Erase button,
Then Flash with latest MCU+PPM
Then Upload PM,
Then Unlock your phone.
I think it will help you.

mroa · 04-15-2005, 10:08

I reflash PCB and after it phone live and I can flash now and work well

THX for repley

BR

04-15-2005, 09:29	#1 (permalink)
mroa Freak Poster Join Date: Dec 2002 Age: 41 Posts: 419 Member: 18791 Status: Offline Sonork: 100.1577421 Thanks Meter: 74	after flash 2650 phone dead I flash 2650 using twister flasher after it phone become dead I can't flash it now I have error "Erasing Error: 10, at: 0x01000000-0x0100FFFF, 940207, Time: 00:00 " what to do whit this nokia BR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
After flash A62 phone dead	sharaz191	DreamBox	8	02-23-2010 13:12
after flashing my phone dead	ibgumel	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	02-18-2010 18:06
U8110 After Flash gdfs phone dead	..::Sunil::..	Cruiser Suite	11	06-14-2007 00:59
7610 new flash chip phone dead after flash	mccm	Griffin	1	12-24-2005 09:21
cant set UI after flashing 2650	coly	Nokia Digital Core Technology 4 ( DCT-4 )	0	10-04-2005 15:15

04-15-2005, 09:48	#2 (permalink)
modzek Freak Poster Join Date: Dec 2002 Location: PL Age: 43 Posts: 318 Member: 19086 Status: Offline Thanks Meter: 3	Uninstal twistersuit , 2650 phinix pack instal twistersuit and again 2650 if no result uninstal all phinix pack and then reinstal twister suit. if no trye too on difrent version twistesuit.

04-15-2005, 09:51	#3 (permalink)
b2k Freak Poster Join Date: Mar 2004 Location: VoiD Posts: 276 Member: 59737 Status: Offline Sonork: 100.1603188 Thanks Meter: 18	Or try other version of software Sometimes it helps.

04-15-2005, 09:53	#4 (permalink)
mroa Freak Poster Join Date: Dec 2002 Age: 41 Posts: 419 Member: 18791 Status: Offline Sonork: 100.1577421 Thanks Meter: 74	I'll try all this solutions not work still same problem I think it's problem whit nokia not whit twister suite or flash coz I also can't erase flash and I can read info from phone BR

04-15-2005, 09:58	#5 (permalink)
modzek Freak Poster Join Date: Dec 2002 Location: PL Age: 43 Posts: 318 Member: 19086 Status: Offline Thanks Meter: 3	write step by step all proces. if you dowgrade flash use same flash as phone orginal. i have this problem on 3220 v3.60 use new twister suit and will by ok.

04-15-2005, 10:02	#6 (permalink)
Singh05 No Life Poster Join Date: Jun 2004 Location: Lisbon, Portugal Age: 47 Posts: 630 Member: 69293 Status: Offline Thanks Meter: 19	Erase full flash using Erase button, Then Flash with latest MCU+PPM Then Upload PM, Then Unlock your phone. I think it will help you.

04-15-2005, 10:08	#7 (permalink)
mroa Freak Poster Join Date: Dec 2002 Age: 41 Posts: 419 Member: 18791 Status: Offline Sonork: 100.1577421 Thanks Meter: 74	I reflash PCB and after it phone live and I can flash now and work well THX for repley BR