Problems reading/resetting user code on 6210 - GSM-Forum

James_S · 06-06-2005, 05:20

I know theres a lot of trouble reading/resetting the security code on 6210 on free tools available, but i expected that Twister could handle this model ok. Unfortunately it doesn't support it...

- The code read does not work ("Code error")
- 12345 does not work (after code is reset - it even show up as 12345 when reading").

Does anyone know what to do - which does not reset ANY data on the phone?

Syed · 06-06-2005, 06:11

u may need to rewrite EEPROM in ur phone... it seems like damaged EEPROM !! or write full flash

WBR
Syed

ihsanali · 06-06-2005, 06:47

mr just flash ur fone with security file u can find in search option
security for 6210_5b0000.fls. if u have ufs then flash this file in ppm area

DMD · 06-06-2005, 07:16

@ BlickBox

just flash the handset its quite common on 6210 and 7110

WBR D.

James_S · 06-06-2005, 17:06

But that will delete data on the phone!!?

BLIDA · 06-06-2005, 17:15

read full flash with rolis or other old dct3 flasher save it on bin format after that use NFREE 1.3 reset counter of security code .
reflash your phone with this flash and tape your 12345 voila .(no data lost after )
br
DJAMEL

fingusio · 06-06-2005, 18:04

Rename to 6210 sec reset.zip , unpack and just flash by Twister with this file

And all will be ok

br.
fingusio

James_S · 06-06-2005, 23:38

Seriously... None of this is working. I have tried manually flashing a modded flash using NFREE 1.3 --> Not working.

I have flashed the file fingusio attached --> Not working.

Even downloaded virgin EEPROM from twister support. HAd to clear sim-locks and repair IMEI, but when phone rebooted it asked for security code and...
...surprise.... "Code error!"

mas comm · 06-07-2005, 07:41

Quote:

Originally Posted by BlickBox

Seriously... None of this is working. I have tried manually flashing a modded flash using NFREE 1.3 --> Not working.

I have flashed the file fingusio attached --> Not working.

Even downloaded virgin EEPROM from twister support. HAd to clear sim-locks and repair IMEI, but when phone rebooted it asked for security code and...
...surprise.... "Code error!"

TRY TO USE OLD DCT3 SOFTWARE "UCABLES-FLASHER" AND FLASH WITH ATTACH FILE . BUT THIS SOFTWARE LL WORK FINE ON WIN98.

James_S · 06-09-2005, 23:56

Didn't work either...

Steamroller · 06-10-2005, 10:03

first of all you need fullflash : mcu+ppm + pm(virgin eeprom)
than > > erase flash from 00200000 to 005FFFFF (all flash content will be erased) >>flash mcu,ppm and pm >> set FaId >> rebuild IMEI >> set FaId >> UI defaults >> init simlocks >> init security code >> Phone OK
If you do that and phone is not ok change flash IC and do that again (reflash procedure)
good luck

Steamroller · 06-10-2005, 10:05

if you can't find any good flash files or you want TESTED and 1000% working flash files for 6210 e-mail me at : [email protected] and I'll send my flashes!

James_S · 06-11-2005, 08:26

It worked after reflashing the entire phone.

I find it very weird that an old phone like 6210 is not possible to reset security code on, without deleting EVERYTHING on it...

r-o-y · 05-18-2006, 08:19

Quote:

Originally Posted by Steamroller

first of all you need fullflash : mcu+ppm + pm(virgin eeprom)
than > > erase flash from 00200000 to 005FFFFF (all flash content will be erased) >>flash mcu,ppm and pm >> set FaId >> rebuild IMEI >> set FaId >> UI defaults >> init simlocks >> init security code >> Phone OK
If you do that and phone is not ok change flash IC and do that again (reflash procedure)
good luck

10x man this solution working well

r-o-y · 05-18-2006, 08:22

erase flash from 00200000 to 005FFFFF (all flash content will be erased)

06-06-2005, 05:20	#1 (permalink)
James_S No Life Poster Join Date: Jan 2005 Age: 54 Posts: 1,726 Member: 105625 Status: Offline Thanks Meter: 44	Problems reading/resetting user code on 6210 I know theres a lot of trouble reading/resetting the security code on 6210 on free tools available, but i expected that Twister could handle this model ok. Unfortunately it doesn't support it... - The code read does not work ("Code error") - 12345 does not work (after code is reset - it even show up as 12345 when reading"). Does anyone know what to do - which does not reset ANY data on the phone?

06-06-2005, 06:47	#3 (permalink)
ihsanali No Life Poster Join Date: Mar 2003 Location: pakistan Age: 45 Posts: 717 Member: 23939 Status: Offline Thanks Meter: 14	6210 security code mr just flash ur fone with security file u can find in search option security for 6210_5b0000.fls. if u have ufs then flash this file in ppm area

06-06-2005, 23:38	#8 (permalink)
James_S No Life Poster Join Date: Jan 2005 Age: 54 Posts: 1,726 Member: 105625 Status: Offline Thanks Meter: 44	Seriously... None of this is working. I have tried manually flashing a modded flash using NFREE 1.3 --> Not working. I have flashed the file fingusio attached --> Not working. Even downloaded virgin EEPROM from twister support. HAd to clear sim-locks and repair IMEI, but when phone rebooted it asked for security code and... ...surprise.... "Code error!" Last edited by James_S; 06-07-2005 at 00:00.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to read or reset user code on Alcatel C560a philips based phone?	DJiCE	Alcatel TCL Phones and New Models	1	02-12-2008 03:24
How to reset user code on 3510i???	andrew_gsm	Nokia Digital Core Technology 4 ( DCT-4 )	3	12-14-2003 17:05
need to reset user code on sharp gx10	jab	Sharp	0	04-18-2003 19:58
Reset Security code on 6210	Joseph79	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	08-30-2001 12:26
how to reset security code on 6210?	pilcris	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-11-2001 22:59

06-06-2005, 06:11	#2 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	u may need to rewrite EEPROM in ur phone... it seems like damaged EEPROM !! or write full flash WBR Syed

06-06-2005, 07:16	#4 (permalink)
DMD No Life Poster Join Date: Jun 2002 Location: CTSA Age: 46 Posts: 2,194 Member: 12660 Status: Offline Thanks Meter: 7	@ BlickBox just flash the handset its quite common on 6210 and 7110 WBR D.

06-06-2005, 17:06	#5 (permalink)
James_S No Life Poster Join Date: Jan 2005 Age: 54 Posts: 1,726 Member: 105625 Status: Offline Thanks Meter: 44	But that will delete data on the phone!!?

06-06-2005, 17:15	#6 (permalink)
BLIDA No Life Poster Join Date: Sep 2002 Location: ALGERIA Posts: 1,716 Member: 15439 Status: Offline Sonork: 100.43816 Thanks Meter: 52	read full flash with rolis or other old dct3 flasher save it on bin format after that use NFREE 1.3 reset counter of security code . reflash your phone with this flash and tape your 12345 voila .(no data lost after ) br DJAMEL

06-09-2005, 23:56	#10 (permalink)
James_S No Life Poster Join Date: Jan 2005 Age: 54 Posts: 1,726 Member: 105625 Status: Offline Thanks Meter: 44	Didn't work either...

06-10-2005, 10:03	#11 (permalink)
Steamroller Freak Poster Join Date: Mar 2005 Location: Ro Age: 43 Posts: 260 Member: 126197 Status: Offline Thanks Meter: 26	first of all you need fullflash : mcu+ppm + pm(virgin eeprom) than > > erase flash from 00200000 to 005FFFFF (all flash content will be erased) >>flash mcu,ppm and pm >> set FaId >> rebuild IMEI >> set FaId >> UI defaults >> init simlocks >> init security code >> Phone OK If you do that and phone is not ok change flash IC and do that again (reflash procedure) good luck

06-10-2005, 10:05	#12 (permalink)
Steamroller Freak Poster Join Date: Mar 2005 Location: Ro Age: 43 Posts: 260 Member: 126197 Status: Offline Thanks Meter: 26	if you can't find any good flash files or you want TESTED and 1000% working flash files for 6210 e-mail me at : [email protected] and I'll send my flashes!

06-11-2005, 08:26	#13 (permalink)
James_S No Life Poster Join Date: Jan 2005 Age: 54 Posts: 1,726 Member: 105625 Status: Offline Thanks Meter: 44	It worked after reflashing the entire phone. I find it very weird that an old phone like 6210 is not possible to reset security code on, without deleting EVERYTHING on it...