Twister can't detect N3100... - GSM-Forum

merulez29 · 10-17-2004, 11:50

I got a lot of N3100's for flashing but Twister dont detect them. My cable is Ok 'coz i've tried it with N6100's... Can anybody here tell me how to solve this, or do N3100 & N6100 have different cables?...

big mama · 10-17-2004, 13:16

do it manually by pressing power button when flashing, or just turn it on when doing some ui operation....

big mama · 10-17-2004, 13:18

btw explore using your box and you may learned a lot......

Royslade · 10-17-2004, 21:10

Hi,

Check the 3,3KOhm resistor in the BSI line. Maybe it's missing.

BR Roy

NeXuSGTS · 10-17-2004, 21:26

Quote:

Originally Posted by merulez29

I got a lot of N3100's for flashing but Twister dont detect them. My cable is Ok 'coz i've tried it with N6100's... Can anybody here tell me how to solve this, or do N3100 & N6100 have different cables?...

Same thing is happening to me everytime i want to flash an N3100.
This is hot i do it.
Connect cable to phone.Select DCT4 . Power on the phone. Press "info".
Select files to flash. Press "FLASH" .
Phone will power off. After 4-5 seconds shortly press "Power on" on the phone.
Flashing will start normally.

Regards,
NeXUSGTS

Phantom · 10-17-2004, 22:04

Normally, you might have to power it up yourself or if you're lucky, it might power up itself. Either way, it will fail just before PPM flashing. Here is how you solve the problem

REMOVE 4.7K resistor that is connected from BSI to GND and do a slight modification.

From RJ45, add a 3.3K resistor directly to BSI and this will solve all problems.

Quote:

Originally Posted by merulez29

I got a lot of N3100's for flashing but Twister dont detect them. My cable is Ok 'coz i've tried it with N6100's... Can anybody here tell me how to solve this, or do N3100 & N6100 have different cables?...

Raskal · 10-18-2004, 01:34

Quote:

Originally Posted by Phantom

Normally, you might have to power it up yourself or if you're lucky, it might power up itself. Either way, it will fail just before PPM flashing. Here is how you solve the problem

REMOVE 4.7K resistor that is connected from BSI to GND and do a slight modification.

From RJ45, add a 3.3K resistor directly to BSI and this will solve all problems.

I think he does it allready since he said before he try it with 6100 and it does work.

Royslade · 10-18-2004, 06:22

Well I did many 6100 without a problem but a few days ago I bought a 3100 and it didn't work fine. I measured the BSI line and didn't find the 3,3K resistor. Put it there and problem was solved.

BR Roy

soybean · 10-18-2004, 07:38

I'm sorry to ask the basic thing, I'm newbie for twister product. What is the BSI line? If I want to add 3,3K resistor, do I have to open Twister casing? Because I have the same problem to connect 3100.

JFK · 10-18-2004, 08:17

May be this will help you,

http://forum.gsmhosting.com/vbb/showthread.php?t=147024

Regards
JFK

soybean · 10-18-2004, 09:13

Yes JFK, it helps me. Thanks for your answer.

10-17-2004, 11:50	#1 (permalink)
merulez29 Freak Poster Join Date: Apr 2004 Location: Fahad Al Salem, Kuwait Age: 42 Posts: 176 Member: 63385 Status: Offline Thanks Meter: 3	Twister can't detect N3100... I got a lot of N3100's for flashing but Twister dont detect them. My cable is Ok 'coz i've tried it with N6100's... Can anybody here tell me how to solve this, or do N3100 & N6100 have different cables?...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
my smart-clip can't update, can't detect help urgent	macs1222	Smart-Clip	3	07-10-2009 10:22
Can't detect Siemens c62 whille Furios detect IT	Formingus	Cruiser Suite	1	12-02-2008 12:19
k800i can't on can't detect by SETOOL also	bc4896	Sony Ericsson Hardware Repair	4	08-13-2008 10:49
twister not detected	defuct_k	Twisterflasher	2	08-02-2005 04:39
Twister can't set the FAID	MisterX GSMFREE	Twisterflasher	4	09-13-2004 17:04

10-17-2004, 13:16	#2 (permalink)
big mama Junior Member Join Date: Oct 2004 Posts: 10 Member: 85210 Status: Offline Thanks Meter: 0	do it manually by pressing power button when flashing, or just turn it on when doing some ui operation....

10-17-2004, 13:18	#3 (permalink)
big mama Junior Member Join Date: Oct 2004 Posts: 10 Member: 85210 Status: Offline Thanks Meter: 0	btw explore using your box and you may learned a lot......

10-17-2004, 21:10	#4 (permalink)
Royslade No Life Poster Join Date: Aug 2002 Age: 57 Posts: 769 Member: 14515 Status: Offline Sonork: 100.77248 Thanks Meter: 15	Hi, Check the 3,3KOhm resistor in the BSI line. Maybe it's missing. BR Roy

10-18-2004, 06:22	#8 (permalink)
Royslade No Life Poster Join Date: Aug 2002 Age: 57 Posts: 769 Member: 14515 Status: Offline Sonork: 100.77248 Thanks Meter: 15	Well I did many 6100 without a problem but a few days ago I bought a 3100 and it didn't work fine. I measured the BSI line and didn't find the 3,3K resistor. Put it there and problem was solved. BR Roy

10-18-2004, 07:38	#9 (permalink)
soybean Freak Poster Join Date: Aug 2004 Posts: 498 Member: 77254 Status: Offline Thanks Meter: 9	I'm sorry to ask the basic thing, I'm newbie for twister product. What is the BSI line? If I want to add 3,3K resistor, do I have to open Twister casing? Because I have the same problem to connect 3100.

10-18-2004, 08:17	#10 (permalink)
JFK Freak Poster Join Date: Nov 2003 Posts: 270 Member: 43976 Status: Offline Thanks Meter: 4	May be this will help you, http://forum.gsmhosting.com/vbb/showthread.php?t=147024 Regards JFK

10-18-2004, 09:13	#11 (permalink)
soybean Freak Poster Join Date: Aug 2004 Posts: 498 Member: 77254 Status: Offline Thanks Meter: 9	Yes JFK, it helps me. Thanks for your answer.