samsung d410 camera problem - GSM-Forum

mobx montenegro · 10-23-2004, 23:43

it was dropen in water and after service procedure tel works fine with little problems like this problem when I wany to startiing camera in lcd shows''data cabel is conected or ir port aktivaited'' I try to cllen phone many times and problem still remaine any ideas or similiar problems with this model?

thanks and best regarts!

XenKo78 · 10-24-2004, 00:00

Replace flex cable it think is for 90%, or maybe when u drop it u kill camera or pcb...

Aamir_Zia · 10-24-2004, 00:04

Its a same prob that we have in V200

I know someone know that how to Solve ..
Change Trident Chip
OR

Bye

RedeYeS · 10-24-2004, 01:13

not trident .. its flex cable as xenko said .. its famous problem in D410 and some times cause also no ring tune when flip closed or white screen

mobx montenegro · 10-24-2004, 18:58

my flex conector is little damage and I will replace it and come basck with new!!

regarts

mohammad2004 · 11-05-2004, 02:01

1-full eprom and flash org by ust pro

2-replace or change the flat cable

3-test the connector board and camera

4-test the camera phone linz

vulf_anatolige · 11-05-2004, 02:09

change the flat cable is ok

travolta · 09-12-2005, 10:33

my fone gives me a "please wait" message anytime i try to activate the camera and it remains like that till i exit the function,can some1 pls tell me if its software or hardware,and how i can resolve the problem.

travolta · 09-12-2005, 10:38

Quote:

Originally Posted by mobx montenegro

it was dropen in water and after service procedure tel works fine with little problems like this problem when I wany to startiing camera in lcd shows''data cabel is conected or ir port aktivaited'' I try to cllen phone many times and problem still remaine any ideas or similiar problems with this model?

thanks and best regarts!

my thinking is aamir zia is correct as in the case of v200 i.e the trident option,but only u can prove the clear solution by trying the the options and posting the result.

marple · 09-14-2005, 22:42

This is hardware problem,just remove one small part from PCB and camera will working without "remove data or IRDA"
Regards

hamzaa · 09-19-2005, 14:58

anyone who has solution.please post here for the benefit for everyone.

10-23-2004, 23:43	#1 (permalink)
mobx montenegro Freak Poster Join Date: Aug 2004 Age: 51 Posts: 117 Member: 78958 Status: Offline Thanks Meter: 0	samsung d410 camera problem it was dropen in water and after service procedure tel works fine with little problems like this problem when I wany to startiing camera in lcd shows''data cabel is conected or ir port aktivaited'' I try to cllen phone many times and problem still remaine any ideas or similiar problems with this model? thanks and best regarts!

09-12-2005, 10:33	#8 (permalink)
travolta Freak Poster Join Date: Aug 2004 Age: 45 Posts: 325 Member: 77076 Status: Offline Thanks Meter: 7	D410 camera problem my fone gives me a "please wait" message anytime i try to activate the camera and it remains like that till i exit the function,can some1 pls tell me if its software or hardware,and how i can resolve the problem.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
samsung d410 strange problem	mobilehut1	Samsung Hardware Repair	3	11-25-2007 20:55
Samsung E315 Camera Problem	yozh	Trident/AGERE Platform	1	03-18-2006 20:49
samsung d410 networt problem	obioha	Trident/AGERE Platform	0	07-12-2005 10:58
samsung e700 camera problem	corkys	Samsung Hardware Repair	26	01-15-2005 12:34
Samsung V200 camera problem	Raklm	Samsung Hardware Repair	5	09-20-2003 01:14

10-24-2004, 00:00	#2 (permalink)
XenKo78 No Life Poster Join Date: Mar 2002 Location: Guadeloupe Age: 50 Posts: 531 Member: 9955 Status: Offline Thanks Meter: 7	Replace flex cable it think is for 90%, or maybe when u drop it u kill camera or pcb...

10-24-2004, 00:04	#3 (permalink)
Aamir_Zia No Life Poster Join Date: Dec 2003 Location: Karachi Pakistan Age: 38 Posts: 6,770 Member: 47321 Status: Offline Sonork: 100.54032 Thanks Meter: 497	Its a same prob that we have in V200 I know someone know that how to Solve .. Change Trident Chip OR Bye

10-24-2004, 01:13	#4 (permalink)
RedeYeS No Life Poster Join Date: Aug 2003 Location: Jo Age: 45 Posts: 613 Member: 36706 Status: Offline Sonork: 100.58560 Thanks Meter: 122	not trident .. its flex cable as xenko said .. its famous problem in D410 and some times cause also no ring tune when flip closed or white screen

10-24-2004, 18:58	#5 (permalink)
mobx montenegro Freak Poster Join Date: Aug 2004 Age: 51 Posts: 117 Member: 78958 Status: Offline Thanks Meter: 0	my flex conector is little damage and I will replace it and come basck with new!! regarts

11-05-2004, 02:01	#6 (permalink)
mohammad2004 No Life Poster Join Date: Jul 2004 Age: 38 Posts: 641 Member: 71144 Status: Offline Thanks Meter: 12	1-full eprom and flash org by ust pro 2-replace or change the flat cable 3-test the connector board and camera 4-test the camera phone linz

11-05-2004, 02:09	#7 (permalink)
vulf_anatolige Freak Poster Join Date: Sep 2004 Location: Algiers Age: 52 Posts: 255 Member: 83788 Status: Offline Thanks Meter: 11	change the flat cable is ok

09-14-2005, 22:42	#10 (permalink)
marple No Life Poster Join Date: Mar 2003 Location: Europe Age: 54 Posts: 788 Member: 24581 Status: Offline Thanks Meter: 87	This is hardware problem,just remove one small part from PCB and camera will working without "remove data or IRDA" Regards

09-19-2005, 14:58	#11 (permalink)
hamzaa Freak Poster Join Date: Oct 2004 Age: 42 Posts: 487 Member: 84694 Status: Offline Thanks Meter: 9	anyone who has solution.please post here for the benefit for everyone.