Samsung V200 "pause by temperature repair" - GSM-Forum

sunnytek · 12-06-2004, 19:38

Hello, please i would like to know how to repair a samsung V200 that automatically stops charging in few seconds, whenever it is placed on charge, and a write-up is displaced - "pause by temperature".

UnlockingExperts · 12-07-2004, 00:28

i got the same problem with one of the V200 !!!! any solution ?

florinfr80 · 12-07-2004, 10:32

Quote:

Originally Posted by sunnytek

Hello, please i would like to know how to repair a samsung V200 that automatically stops charging in few seconds, whenever it is placed on charge, and a write-up is displaced - "pause by temperature".

I had the same problem. I reflew U101 (near Sim holder) with flux, and I solved the problem. If it didn't work, replace LTRG or P20D.

sunnytek · 12-08-2004, 16:15

Quote:

Originally Posted by florinfr80

I had the same problem. I reflew U101 (near Sim holder) with flux, and I solved the problem. If it didn't work, replace LTRG or P20D.

Hi,

I do not understand what you meant by :

> Reflew U101 ( near sim holder) with flux, and
> Replace LTRG or P20D.

Please, can you simplify it a bit.

florinfr80 · 12-08-2004, 22:44

Quote:

Originally Posted by sunnytek

Hi,

I do not understand what you meant by :

> Reflew U101 ( near sim holder) with flux, and
> Replace LTRG or P20D.

Please, can you simplify it a bit.

Reflow U101 a circuit near by the sim holder with flux (it is something to make better jonction)
Replace LTRG it is a component with 6 legs near by sim holder... You must know litle bit electronic... Expensive phone.. try on something cheaper

das100 · 12-09-2004, 04:00

rob flux on ic ,press down and heat leg with soldering iron,u may damage if u use workstation ****er

sunnytek · 12-11-2004, 17:50

Yeah thanks Pal, i've got it!

cellularry · 12-11-2004, 23:11

U100 and Not U101.
just resolder it and your phone will work 100 %

segun · 12-13-2004, 15:20

i have solved a ot of pause by temperature all u just have to do is look for the u100 i.c or u101 and apply some plus or solderibg paste on it and u gat ur problems solved
SO FEEL COOL

abbeydguru · 12-13-2004, 20:24

@segun, u shld know the difference between u100 and u101. u need to be specific with your suggestion. The ideal solution is to change U100.

abbeydguru · 12-13-2004, 20:32

@segun, u shld know the difference between u100 and u101. u need to be specific with your suggestion. The ideal solution is to change U100.

gbada · 01-22-2005, 14:36

please how many leg is this u100 ic please tell me

cellularry · 01-22-2005, 16:47

Quote:

Originally Posted by gbada

please how many leg is this u100 ic please tell me

U100 is the IC next to Sim Card. legs are all around. too many

gbada · 01-24-2005, 16:29

please how do i repair the u 1oo do i use rework station or just soldering iron to reflow it

cellularry · 01-24-2005, 21:24

Quote:

Originally Posted by gbada

please how do i repair the u 1oo do i use rework station or just soldering iron to reflow it

Use soldering iron only. follow all the legs all around the U100

12-06-2004, 19:38	#1 (permalink)
sunnytek Major Poster Join Date: Aug 2004 Location: Internet Age: 43 Posts: 40 Member: 78100 Status: Offline Thanks Meter: 1	Samsung V200 "pause by temperature repair" Hello, please i would like to know how to repair a samsung V200 that automatically stops charging in few seconds, whenever it is placed on charge, and a write-up is displaced - "pause by temperature".

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
please,C100 "pause by temperature ?	eng.hamdow	Samsung Hardware Repair	11	02-26-2010 23:04
Samsung V200 Paused by temperature solution Needed Plzz~!!~	fonesintones	Samsung Hardware Repair	7	11-19-2007 06:15
e330 "paused by temperature	uysalsaat	Samsung Hardware Repair	2	09-20-2006 07:17
Samsung V200 Paused By Temperature Problem!	axilleask	Trident/AGERE Platform	4	01-25-2005 19:06
v200 "paused by temperature"	mailhassan	Trident/AGERE Platform	14	04-29-2004 09:48

12-07-2004, 00:28	#2 (permalink)
UnlockingExperts No Life Poster Join Date: Mar 2004 Location: UAE / UK / PAK / HK Posts: 712 Member: 59731 Status: Offline Sonork: 100.99999 Thanks Meter: 514	i got the same problem with one of the V200 !!!! any solution ?

12-09-2004, 04:00	#6 (permalink)
das100 Freak Poster Join Date: Oct 2003 Age: 41 Posts: 221 Member: 40849 Status: Offline Thanks Meter: 285	rob flux on ic ,press down and heat leg with soldering iron,u may damage if u use workstation ****er

12-11-2004, 17:50	#7 (permalink)
sunnytek Major Poster Join Date: Aug 2004 Location: Internet Age: 43 Posts: 40 Member: 78100 Status: Offline Thanks Meter: 1	Yeah thanks Pal, i've got it!

12-11-2004, 23:11	#8 (permalink)
cellularry No Life Poster Join Date: Oct 2003 Location: Lebanon / Nigeria Age: 52 Posts: 1,085 Member: 42276 Status: Offline Thanks Meter: 47	U100 and Not U101. just resolder it and your phone will work 100 %

12-13-2004, 15:20	#9 (permalink)
segun Freak Poster Join Date: Dec 2004 Age: 41 Posts: 399 Member: 97043 Status: Offline Thanks Meter: 29	i have solved a ot of pause by temperature all u just have to do is look for the u100 i.c or u101 and apply some plus or solderibg paste on it and u gat ur problems solved SO FEEL COOL

12-13-2004, 20:24	#10 (permalink)
abbeydguru Cheater -Don't Deal with him- Join Date: Mar 2003 Location: ITALY Posts: 1,124 Member: 23994 Status: Offline Thanks Meter: 43	@segun, u shld know the difference between u100 and u101. u need to be specific with your suggestion. The ideal solution is to change U100.

12-13-2004, 20:32	#11 (permalink)
abbeydguru Cheater -Don't Deal with him- Join Date: Mar 2003 Location: ITALY Posts: 1,124 Member: 23994 Status: Offline Thanks Meter: 43	@segun, u shld know the difference between u100 and u101. u need to be specific with your suggestion. The ideal solution is to change U100.

01-22-2005, 14:36	#12 (permalink)
gbada No Life Poster Join Date: Sep 2004 Age: 46 Posts: 924 Member: 82155 Status: Offline Thanks Meter: 33	please how many leg is this u100 ic please tell me

01-24-2005, 16:29	#14 (permalink)
gbada No Life Poster Join Date: Sep 2004 Age: 46 Posts: 924 Member: 82155 Status: Offline Thanks Meter: 33	please how do i repair the u 1oo do i use rework station or just soldering iron to reflow it