D500 cable - GSM-Forum

Lombard · 02-05-2005, 20:38

Is this is same pin out as any of the older Samsung models?

sergius · 02-05-2005, 20:40

Keypad up, right to left-
1 <-> 14- +Ubat
2- Usb data
3- Usb +5V
4- Usb data
5- Tx
6- Rx
8 <-> 11- GND

keyboard side
18..................1

18 pin Samsung right-to-left numbering mobile special connector at the mobile phone ? Pin Signal Description

5 Tx-------------- ?? from maxim
6 Rx-------------- Rx from maxim

8,11 short ------------- GND

tostefo · 02-12-2005, 17:29

........ok but i have some qestions becouse i can't meke this work.....
1 <-> 14- +Ubat
2- Usb data /TX or RX?
3- Usb +5V
4- Usb data /TX or RX?
5- Tx
6- Rx
8 <-> 11- GND
this is combo cable /MAX323 + USB/ and if i like to yse it only for unlock i can use only RS232?

02-05-2005, 20:38	#1 (permalink)
Lombard Insane Poster Join Date: Jun 2004 Location: Glasgow Age: 43 Posts: 82 Member: 69993 Status: Offline Thanks Meter: 4	D500 cable Is this is same pin out as any of the older Samsung models?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
D500 Cable Faulty - Need Cable Schematic	Speed_Demon	NSPRO	5	07-11-2007 18:47
D500 cable	Burnt Cobba	SWIFT Platform	140	04-24-2006 16:41
samsung d500 cables needed to work with winimimei d500	sim free	Wanted Products	5	04-22-2005 16:47
Pcb037dbe Serial Cable To Modify To D500 Cable	JOKERS	SYSOL Platform	0	02-11-2005 00:30

02-05-2005, 20:40	#2 (permalink)
sergius Freak Poster Join Date: May 2004 Age: 43 Posts: 261 Member: 64591 Status: Offline Thanks Meter: 11	Keypad up, right to left- 1 <-> 14- +Ubat 2- Usb data 3- Usb +5V 4- Usb data 5- Tx 6- Rx 8 <-> 11- GND keyboard side 18..................1 18 pin Samsung right-to-left numbering mobile special connector at the mobile phone ? Pin Signal Description 5 Tx-------------- ?? from maxim 6 Rx-------------- Rx from maxim 8,11 short ------------- GND

02-12-2005, 17:29	#3 (permalink)
tostefo No Life Poster Join Date: Aug 2004 Location: Sofia Age: 43 Posts: 1,541 Member: 77941 Status: Offline Thanks Meter: 120	........ok but i have some qestions becouse i can't meke this work..... 1 <-> 14- +Ubat 2- Usb data /TX or RX? 3- Usb +5V 4- Usb data /TX or RX? 5- Tx 6- Rx 8 <-> 11- GND this is combo cable /MAX323 + USB/ and if i like to yse it only for unlock i can use only RS232?