t100 lcd and speaker problem - pls help me pray - GSM-Forum

Tbaba · 02-16-2004, 11:49

just got a samsung t100 lcd panel fro 25,000. on conneting it... lcd is ok but no sound from the speaker. receiver is also very low (quiet). do i have to flash the phone because of the lcd change? i've tested the speaker and reciever and both are ok. Pls help... I cant return it cant afford another screen now. i still have the old lcd with bad inneer screen but working speaker an reciever. any suiggestions.....

GSM Coolhawk · 02-16-2004, 11:55

@Tbaba

You should first of all check all connections on the flex cables on both LCD side and board side. refer to pictures below.

Specially you have to look into the flex connector that goes to the board.

The "white screen" thingy and speaker if often ONLY related to flex/connector problems. As you see I've made pictures of all connections to check. I had a lot of those, and the most common is that the connector which hooks on the the board have a loose leg somewhere, so this is the first you check.

Regards

Tbaba · 02-16-2004, 22:42

thanks a bunch coolhawk. i tried another flex and it was ok. but just like u said i'll check connectiors on the bad flex cable. your help is appreciated. Cheers

MAJESTIC PIRATE · 02-20-2004, 23:23

change lcd cable .tested........

Tbaba · 02-21-2004, 02:54

new info.... still use the same cable. apprently the foamy condoctor n the plastic back covber of the phone which touches the flex cable connector on the phone side does ALOOOOT of work. on covering up the phone with the old flex cable, sound AND EVERYTHING was ok!! returned the phone today.... I'm real relieved!

02-16-2004, 11:49	#1 (permalink)
Tbaba No Life Poster Join Date: Feb 2003 Posts: 635 Member: 22208 Status: Offline Thanks Meter: 9	t100 lcd and speaker problem - pls help me pray just got a samsung t100 lcd panel fro 25,000. on conneting it... lcd is ok but no sound from the speaker. receiver is also very low (quiet). do i have to flash the phone because of the lcd change? i've tested the speaker and reciever and both are ok. Pls help... I cant return it cant afford another screen now. i still have the old lcd with bad inneer screen but working speaker an reciever. any suiggestions.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3100 key tone ok but no speaker sound?? pls help me	RAJ LOVER BOY	Nokia Hardware & Hardware Repair	7	06-27-2009 20:51
6060 speaker sound pls help me	Diamond02	Nokia Hardware & Hardware Repair	1	11-17-2007 12:59
sgh-x460 speaker fault pls help me	mohamedsafi123	Samsung Hardware Repair	1	08-30-2006 11:18
hi mates !x66 speaker problems,pls help	hpcom	Panasonic	4	08-26-2006 12:54
T400 speaker problem pls help???	proxy_gsm	VLSI, Conexant, Skyworks and Old Models	0	10-07-2003 20:23

02-16-2004, 11:55	#2 (permalink)
GSM Coolhawk No Life Poster Join Date: Dec 2001 Location: United Arab Emirates, Dubai Age: 52 Posts: 1,269 Member: 7751 Status: Offline Thanks Meter: 74	@Tbaba You should first of all check all connections on the flex cables on both LCD side and board side. refer to pictures below. Specially you have to look into the flex connector that goes to the board. The "white screen" thingy and speaker if often ONLY related to flex/connector problems. As you see I've made pictures of all connections to check. I had a lot of those, and the most common is that the connector which hooks on the the board have a loose leg somewhere, so this is the first you check. Regards

02-16-2004, 22:42	#3 (permalink)
Tbaba No Life Poster Join Date: Feb 2003 Posts: 635 Member: 22208 Status: Offline Thanks Meter: 9	thanks a bunch coolhawk. i tried another flex and it was ok. but just like u said i'll check connectiors on the bad flex cable. your help is appreciated. Cheers

02-20-2004, 23:23	#4 (permalink)
MAJESTIC PIRATE Freak Poster Join Date: Dec 2003 Location: E G Y P T Age: 47 Posts: 336 Member: 45635 Status: Offline Thanks Meter: 20	change lcd cable .tested........

02-21-2004, 02:54	#5 (permalink)
Tbaba No Life Poster Join Date: Feb 2003 Posts: 635 Member: 22208 Status: Offline Thanks Meter: 9	new info.... still use the same cable. apprently the foamy condoctor n the plastic back covber of the phone which touches the flex cable connector on the phone side does ALOOOOT of work. on covering up the phone with the old flex cable, sound AND EVERYTHING was ok!! returned the phone today.... I'm real relieved!