aks your question,we answer in 24hours - GSM-Forum

morteza-icu · 08-27-2008, 21:46

anyone have problem ask us
we answer 1n 24 hour

Service4Gsm.de · 08-27-2008, 21:49

Hello
That is beautifully someone is there whom problems is present!

spinegy · 08-28-2008, 04:31

I do got some questions....
I'm facing a weird problem about DB2020 phone...

phone come with Hang problem or dead...flashing passed problem remain...
then i decided to change Flash IC..now here come the problem...it always said that Recovery Fail.Phone CID not supported in that mode"

Note : After change Flash Ic..I go to Empty Fill & Repair + thick CID49 ( when I press Recovery I get this error message )

so I try to change about 3 to 4 Flash IC's already but problem still same...at last I decided to change CPU..unfortunately same error occur...
anyone can tell me what is the problem actually...?
it really make me headache...

vanhh · 08-28-2008, 05:01

W700i white LCD, phone can In/Out call.

Tried with New flash file, LCD original work with another K750 phone, replace LCD connect but problem remain!

How to solve?
Thanks!

leinadblack · 08-28-2008, 05:22

i have a problem w580 not sound horn i change flex and not sound you can help me

morteza-icu · 08-28-2008, 14:17

Quote:

Originally Posted by spinegy

I do got some questions....
I'm facing a weird problem about DB2020 phone...

phone come with Hang problem or dead...flashing passed problem remain...
then i decided to change Flash IC..now here come the problem...it always said that Recovery Fail.Phone CID not supported in that mode"

Note : After change Flash Ic..I go to Empty Fill & Repair + thick CID49 ( when I press Recovery I get this error message )

so I try to change about 3 to 4 Flash IC's already but problem still same...at last I decided to change CPU..unfortunately same error occur...
anyone can tell me what is the problem actually...?
it really make me headache...

please send log when epmty fill

morteza-icu · 08-28-2008, 14:24

Quote:

Originally Posted by vanhh

W700i white LCD, phone can In/Out call.

Tried with New flash file, LCD original work with another K750 phone, replace LCD connect but problem remain!

How to solve?
Thanks!

1-check lcd connector by this method
insert the (+) of multi meter on one by one pin of connector and gnd of multimeter on gnd of board and check value and compare with a good board.if there was a different check connection of pin and cpu.if all connection is ok and connector is good too.you should change cpu.
click on thanks

morteza-icu · 08-28-2008, 14:26

Quote:

Originally Posted by leinadblack

i have a problem w580 not sound horn i change flex and not sound you can help me

1- what sound (speaker or buzzer)?????????
2-test with handsfree and post result
3-post full log of your problem and condition
4-do not forget to click on thanks
5-thanks

farrell · 08-28-2008, 18:54

I wrote a blank GDFS by mistake with the Cruiser, it's a CID52 form Orange Spain, now the phone won't power on and the "C" key blinks red, I've tried everything, EEROM repair won't work, and the phone will only connect with "2" + "5" pressed, not with "C", any ideas? Thanks!

jmustufa · 08-28-2008, 20:08

w810 white display lcd already changed flash also done but problem remain same board is fresh so i havnt try changing board cntr coz its just fresh as its frm company need help plz with pic

REGARDS
MAIMOON MOBILES

dj.orion · 08-28-2008, 20:21

Some Ouote from Farrell:

Code:

 		I wrote a blank GDFS by mistake with the Cruiser

What's mean by Blank GDFS.???

..
Are they (GDFS) must read n write on same CID.???
Example, if had K310 with different CID. Can we write without look n fitting same CID of phone.???

spinegy · 08-29-2008, 04:23

Quote:

Originally Posted by morteza-icu

please send log when epmty fill

this error that only i received...

err: 45
loader prologue returns invalid status
All possible recovery loaders fail.That phone not supported.

zubairsaeed17 · 08-29-2008, 07:31

hy brother plz help me i want k510i sim sim way salution. [email protected]

renesa · 08-29-2008, 07:44

Sir,
I am new in servicing.

how to write RPL. please explain me details with all things.

vicseller · 08-29-2008, 08:08

Hi,

I have a just out of warranty w810i that will power on and flash a white screen once in a while - otherwise it will not power on. Any ideas?

08-27-2008, 21:46	#1 (permalink)
morteza-icu Freak Poster Join Date: Jun 2005 Location: iran-kashan Age: 44 Posts: 444 Member: 157053 Status: Offline Sonork: 100.1606219 Thanks Meter: 489	aks your question,we answer in 24hours anyone have problem ask us we answer 1n 24 hour

08-28-2008, 05:22	#5 (permalink)
leinadblack Junior Member Join Date: Nov 2006 Location: mexico chilangolandia Posts: 36 Member: 401792 Status: Offline Thanks Meter: 3	i need help w580 i have a problem w580 not sound horn i change flex and not sound you can help me

08-28-2008, 18:54	#9 (permalink)
farrell Product Supporter Join Date: Oct 2002 Location: The only true wisdom is in knowing you know nothing. Posts: 669 Member: 16573 Status: Offline Thanks Meter: 2	W580i gdfs corrupt I wrote a blank GDFS by mistake with the Cruiser, it's a CID52 form Orange Spain, now the phone won't power on and the "C" key blinks red, I've tried everything, EEROM repair won't work, and the phone will only connect with "2" + "5" pressed, not with "C", any ideas? Thanks!

08-28-2008, 20:21	#11 (permalink)
dj.orion Freak Poster Join Date: Aug 2006 Location: 202.43.163.90 Posts: 360 Member: 323742 Status: Offline Thanks Meter: 73	Some Ouote from Farrell: Code: I wrote a blank GDFS by mistake with the Cruiser What's mean by Blank GDFS.??? .. Are they (GDFS) must read n write on same CID.??? Example, if had K310 with different CID. Can we write without look n fitting same CID of phone.???

08-29-2008, 07:31	#13 (permalink)
zubairsaeed17 Junior Member Join Date: Oct 2007 Posts: 22 Member: 604786 Status: Offline Thanks Meter: 12	k510i hy brother plz help me i want k510i sim sim way salution. [email protected]

08-27-2008, 21:49	#2 (permalink)
Service4Gsm.de No Life Poster Join Date: Jul 2008 Location: Germany/Niederlande/Turkey Posts: 1,148 Member: 811992 Status: Offline Sonork: 100.1584257 Thanks Meter: 162	Hello That is beautifully someone is there whom problems is present!

08-28-2008, 04:31	#3 (permalink)
spinegy Freak Poster Join Date: Mar 2008 Location: malaysia Posts: 102 Member: 718027 Status: Offline Thanks Meter: 32	I do got some questions.... I'm facing a weird problem about DB2020 phone... phone come with Hang problem or dead...flashing passed problem remain... then i decided to change Flash IC..now here come the problem...it always said that Recovery Fail.Phone CID not supported in that mode" Note : After change Flash Ic..I go to Empty Fill & Repair + thick CID49 ( when I press Recovery I get this error message ) so I try to change about 3 to 4 Flash IC's already but problem still same...at last I decided to change CPU..unfortunately same error occur... anyone can tell me what is the problem actually...? it really make me headache...

08-28-2008, 05:01	#4 (permalink)
vanhh No Life Poster Join Date: Jul 2004 Posts: 504 Member: 71603 Status: Offline Thanks Meter: 31	W700i white LCD, phone can In/Out call. Tried with New flash file, LCD original work with another K750 phone, replace LCD connect but problem remain! How to solve? Thanks!

08-28-2008, 20:08	#10 (permalink)
jmustufa Freak Poster Join Date: Mar 2006 Location: india Posts: 437 Member: 239231 Status: Offline Sonork: 100.1615723 Thanks Meter: 110	w810 white display lcd already changed flash also done but problem remain same board is fresh so i havnt try changing board cntr coz its just fresh as its frm company need help plz with pic REGARDS MAIMOON MOBILES

08-29-2008, 07:44	#14 (permalink)
renesa Junior Member Join Date: Jul 2008 Posts: 30 Member: 808001 Status: Offline Sonork: renesa Thanks Meter: 10	Sir, I am new in servicing. how to write RPL. please explain me details with all things.

08-29-2008, 08:08	#15 (permalink)
vicseller Junior Member Join Date: Aug 2008 Posts: 1 Member: 848717 Status: Offline Thanks Meter: 4	Hi, I have a just out of warranty w810i that will power on and flash a white screen once in a while - otherwise it will not power on. Any ideas?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Answer in this questions ??	svchost	iPhone 2 / iPhone 3G / iPhone 3GS	1	04-02-2009 00:17
Sharp Phones FAQ - All your questions answered	alpha4u	Sharp	5	09-08-2005 23:49
3rd Time Question no answer yet	msas	Motorola Old Legacy (EMMI)	5	12-26-2002 19:28
A FEW QUESTIONS AND ANSWERS	toldien	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	10-17-2001 23:14
Re: A FEW QUESTIONS AND ANSWERS	toldien	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-10-2001 21:24