T100 no signal - GSM-Forum

GSM SNIPER · 05-30-2004, 18:14

T100 displays no network ?
what can be the problem please?
Does It Hard or soft problem level ?

06-01-2004, 16:40

that's hw problem, try cleanup board with ultrasonic cleaner.

if doesn't work you must change rf ic

WBR

**ansartec** · 06-01-2004, 23:39

Change 13MHZ Crystal

GSM SNIPER · 06-04-2004, 22:09

I changed the crystal 13Mhz now the phone doesn't s w i t c h o n and the customer is screwiiiiiiiiiiiiiiiing meeeeeeee !!!!

I replaced the old crystal but the phone styl deeeeaaaaad !!!

HEEEEEEEEEElp please !!

lidar · 06-09-2004, 18:18

ultrasonic solution but not permanent... just few minute show bar signal n can calling n than loses again.n for your problem..change your rf part .

marple · 06-16-2004, 22:56

Dont't panic,first back old crystal,charge batery full,try to read him or flash him with DIV,if he is still dead rehot CPU from back side,if he is still dead......
best way is to buy half or second hand T100,hard way but you will sleep beter
regards

GSM SNIPER · 06-17-2004, 12:13

Quote:

Originally Posted by marple

Dont't panic,first back old crystal,charge batery full,try to read him or flash him with DIV,if he is still dead rehot CPU from back side,if he is still dead......
best way is to buy half or second hand T100,hard way but you will sleep beter
regards

Ooo my Friend Marple ! the phone is coming back to life by your help . thank you very much .but still no signal (no network)!!!!

marple · 06-18-2004, 16:28

Hmmmmm
now he is live,that's good,i will send you are pictures where i will explain you next step (mayby last) what to doe to get the network.I can't garantie 100% but you can nothing to lose

Stoyan · 06-19-2004, 06:54

well, it is better to post that picture here.
I had the same problem.

WBR Stoyan

Falconer43 · 07-16-2004, 06:24

I have the same problem here in Mexico , Its sims that all the t106 model is building with that no network message , please I will apreciate if some of you experts can send me some advise on this mather .

Thanks and regards

Carlos Antonio Cruz Lara Jimenez
Celul******a

Unggul · 07-20-2004, 23:16

have you change the PA/RF ??

sudeeshveekey · 07-22-2004, 12:34

where is the picture?

marple · 07-22-2004, 19:45

well,in my country is summer and wery hot weather,so i have too much yob,sory for late and answer but i realy work too much from morning to night,also sory for bad pictures but i hope you will get the result.If this pictures help to somebody i will be wery happy.
regards to all

Bugytech · 07-23-2004, 07:38

try this man
is working 100%

tush · 07-23-2004, 19:46

hallo.I also have a t100 that has no sound in earpice.i have tried rehoting the phone and also changing the earpice but no success.can anybody have the solution to this problem?

05-30-2004, 18:14	#1 (permalink)
GSM SNIPER No Life Poster Join Date: Apr 2003 Location: Bled lekhla Posts: 2,295 Member: 27291 Status: Offline Thanks Meter: 81	T100 no signal T100 displays no network ? what can be the problem please? Does It Hard or soft problem level ?

07-22-2004, 19:45	#13 (permalink)
marple No Life Poster Join Date: Mar 2003 Location: Europe Age: 54 Posts: 788 Member: 24581 Status: Offline Thanks Meter: 87	t100 well,in my country is summer and wery hot weather,so i have too much yob,sory for late and answer but i realy work too much from morning to night,also sory for bad pictures but i hope you will get the result.If this pictures help to somebody i will be wery happy. regards to all

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help... Nokia 6600 - no signal on speaker, no signal on buzzer.	Normunds	Nokia Hardware & Hardware Repair	6	12-17-2008 08:20
6310 No Signal No Signal	frandau	Nokia Hardware & Hardware Repair	1	05-18-2005 11:40
T100 no signal	eko	VLSI, Conexant, Skyworks and Old Models	3	08-21-2003 17:17
nokia phones with network+full signal then NO SIGNAL AND NO NETWORK NAME .!!	makona	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	07-22-2002 15:20

06-01-2004, 16:40	#2 (permalink)
DeltaGSM Guest Posts: n/a Member:	that's hw problem, try cleanup board with ultrasonic cleaner. if doesn't work you must change rf ic WBR

06-01-2004, 23:39	#3 (permalink)
ansartec Product Manager Join Date: Apr 2003 Location: DUBAI Posts: 323 Member: 26500 Status: Offline Sonork: 100.101633 Thanks Meter: 282	Change 13MHZ Crystal

06-04-2004, 22:09	#4 (permalink)
GSM SNIPER No Life Poster Join Date: Apr 2003 Location: Bled lekhla Posts: 2,295 Member: 27291 Status: Offline Thanks Meter: 81	I changed the crystal 13Mhz now the phone doesn't s w i t c h o n and the customer is screwiiiiiiiiiiiiiiiing meeeeeeee !!!! I replaced the old crystal but the phone styl deeeeaaaaad !!! HEEEEEEEEEElp please !!

06-09-2004, 18:18	#5 (permalink)
lidar Insane Poster Join Date: Sep 2003 Age: 46 Posts: 77 Member: 38647 Status: Offline Thanks Meter: 0	ultrasonic solution but not permanent... just few minute show bar signal n can calling n than loses again.n for your problem..change your rf part .

06-16-2004, 22:56	#6 (permalink)
marple No Life Poster Join Date: Mar 2003 Location: Europe Age: 54 Posts: 788 Member: 24581 Status: Offline Thanks Meter: 87	Dont't panic,first back old crystal,charge batery full,try to read him or flash him with DIV,if he is still dead rehot CPU from back side,if he is still dead...... best way is to buy half or second hand T100,hard way but you will sleep beter regards

06-18-2004, 16:28	#8 (permalink)
marple No Life Poster Join Date: Mar 2003 Location: Europe Age: 54 Posts: 788 Member: 24581 Status: Offline Thanks Meter: 87	Hmmmmm now he is live,that's good,i will send you are pictures where i will explain you next step (mayby last) what to doe to get the network.I can't garantie 100% but you can nothing to lose

06-19-2004, 06:54	#9 (permalink)
Stoyan No Life Poster Join Date: Aug 2002 Location: BULGARIA Age: 53 Posts: 1,185 Member: 14868 Status: Offline Thanks Meter: 44	well, it is better to post that picture here. I had the same problem. WBR Stoyan

07-16-2004, 06:24	#10 (permalink)
Falconer43 Junior Member Join Date: Feb 2004 Location: Mexico Age: 63 Posts: 1 Member: 53491 Status: Offline Thanks Meter: 0	I have the same problem here in Mexico , Its sims that all the t106 model is building with that no network message , please I will apreciate if some of you experts can send me some advise on this mather . Thanks and regards Carlos Antonio Cruz Lara Jimenez Celul******a

07-20-2004, 23:16	#11 (permalink)
Unggul No Life Poster Join Date: Jul 2004 Location: Bandung - West Java, Indonesia Age: 43 Posts: 501 Member: 71273 Status: Offline Thanks Meter: 14	have you change the PA/RF ??

07-22-2004, 12:34	#12 (permalink)
sudeeshveekey No Life Poster Join Date: Dec 2002 Location: cell-spare cochin penta kerala Posts: 585 Member: 18837 Status: Offline Sonork: 100.1601544 Thanks Meter: 71	where is the picture?

07-23-2004, 19:46	#15 (permalink)
tush Junior Member Join Date: Jul 2004 Location: kenya Age: 46 Posts: 2 Member: 73829 Status: Offline Thanks Meter: 0	hallo.I also have a t100 that has no sound in earpice.i have tried rehoting the phone and also changing the earpice but no success.can anybody have the solution to this problem?