tp trick..please..

[fasany]

how to use test point method for sony k320?
can that method we use it when flashing the phone?
how?

[algerienbox]

whay you need to use tp !!!you have 5cadna closed !!!

[fasany]

what did u mean "5cadna closed"????

[fasany]

if my gdfs (k320)
has problem "startup failed" what should i do?

[algerienbox]

next time read FAQ

q: 
when i flashing/completing/etc phone i got error like

Code:
loader startup: executed
Loader refused to start GDFS services,error is:29
loader GDFS startup failed, that is fatal
Elapsed: 734 secs.what to do ?

a:
that error can be caused by different problems. lets see all of them

1. user has run "executor" application, which was not deleted after "new altbypass unlock".

solution - 
select correct model
on settings check only "use preloader security bypass".
execute any operation, say : "read flash"

2. main software somehow has been damaged (cause of free tools, etc)
solution -
select correct model
on settings check only "use signed mode".
add to firmware area only main part of firmware 
press flash (use com/ufs or dcu60 with "2+5" keys if phone not connecting with "C" )
after that, phone should show identify normally.

.... and if not.... 

3. gdfs area has been damaged (bad flash ic, firmware error,etc)
solution - 

a) install empty flash chip and do emptyboard fill procedure
b) try to repair gdfs area with VERY complex testpoints (http://www.mobile-files.com/forum/sh...&postcount=277)
c) change both mcu+flash chip from other phone

[fasany]

it say bad username/password.
what should i do? what ip address should i put?

[algerienbox]

Originally Posted by fasany

it say bad username/password.
what should i do? what ip address should i put?

you can't download from support!!!! or what!!!!

try to flash just a main part no need to put fs
and post log

[fasany]

v0.914039/UNI
CARD SERIAL:
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER).
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:50 PAF:1 IMEI:35165002187966 CERT:RED
FLASH CID:50 COLOR:RED
set_gdfs_props failed, exiting
Elapsed: 123 secs.

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35165002187966 CERT:RED
LDR:060712 1520 HAN_DB2012_FLASHLOADER_R1A002_CXC1250695
Flash ID check:897E
Flash props sent ok
writing D:\Mcu\SETOOL\K320\new cid50\R4EA031_1250683_CHINA_MA.ssw.cry
CURRENT FLASH FILE CID:50
SSW uses complete hash, hash len is:6580
Will flash 329 blocks...
SSW loading returns:0
Elapsed: 443 secs.

[fasany]

what should i do? can i fix it?

[10xs4asking]

Guide GDFS repair done by RealOne Se TP 0914037
So far this is the only one i see with clear explanation on how to use TP GDFS repair under SE tool posted by Rea1One

I hope Rea1ONE wont mine me posting this here for our REFERENCE and Advance Thanks to You..
Again CREDITS goes to Real1One
Here is the Tutorial:

1. go to emptyboard fill & repair

2. select any db2020 model

3. press "TP STAGE #1". read "instructions" and execute them.

or (3a. check the box between the TP STAGE 1 & 2 in order to automatically proceed to tp sage 2 if your TP #1 is ok)

4. press "TP STAGE #2". read "instructions" and execute them.






now the the phone is cid49 brown




6. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format

=== now write db2020gdfs_in_ssw_format_CID49_BROWN.ssw"====







7. if flashing went fine, flash db2020 erom with needed CID

= since my otp cid is 51 so i used "DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw", ===


=== warning;=== example if your otp cid is CID51

=== do not write erom with lower cid
ex..k800_erom_cnv_RED49_BROWN_CID49_DB2020.ssw
because you cant flash the phone it gives you an error
when you perform fullflash



8. phone now retail and repaired. fullflash phone as usual.









regard

hannif007

originly posted by rikishi

[10xs4asking]

Also try to use the lastest software...

v0.915038

- timeout for A2 flashing increased, that fixed error
"can't get NET header" on some models in the end of filesystem flashing
- unsigned mode A2 loaders updated to latest versions
- some not important bugfixes

[fasany]

latest log...


v0.914039/UNI
CARD SERIAL:
Loaded 51 flash descriptors
TESTPOINT REPAIR STAGE #1 STARTED
Open COM port OK
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE

PHONE IS RED RETAIL PRODUCT
FLASH CID detected:50
Speed:921600
OTP LOCKED:1 CID:50 PAF:1 IMEI:35165002187966 CERT:RED
FLASH CID:50 COLOR:RED
set_gdfs_props failed, exiting
SETOOL2 CAN'T FIX THAT PHONE
PLEASE FLASH MAIN PART OF FIRMWARE AND RETRY
Elapsed: 66 secs.

[fasany]

is that latest vers has virus? cause vers ..37 has virus..

[fasany]

there is a virus name THEMIDA.

like other vers of setool...

[luzer]

Themida isnt a virus ... is a good known protection.