w550i keypad problem - GSM-Forum

gct · 03-20-2006, 03:55

after falsh with hwk with TP

now phone can on but keypad just can press 1.3.5.7.9.0 and LED no light

what is the problem here?
software?
or
hardware?

please help!

GSMLover2010 · 03-20-2006, 04:52

do you know before flash it works !
it seems hardware or you do bad replace keypad when opening phone.
you can flash it with other box

gct · 03-20-2006, 05:31

i can comfirm before i flash it ,the keypad is working

gct · 03-20-2006, 05:37

do u have this problem before? GSMLover2010

nobody can help me?

or when i use tp to flash, SPARK the KEYPAD I.C?
or have i bypass the i.c to other i.c

anyone know,what problem of this?
software or hardware?
anyone can comfirm?
thanks

mobilesmith · 03-20-2006, 19:50

@gct
hi,
are u confirm before do your firmware upgrade , the keypad is well working??
if it is , what r u trying to do with hardware??
mostly like u have mess with that GDFS, & u can try to write GDFS & unlock to it..

gct · 03-21-2006, 03:14

my 550i just have white screen.
and i flash it using HWK with TP.

i can comfirm the keypad is working before i flash it.
after flash it ,keypad just can press 1.3.5.7.9.0. and L.E.D no light

Quote:

mostly like u have mess with that GDFS, & u can try to write GDFS & unlock to it

but after flash with GDFS give by Odia.
the problem is still same........

atulgsm · 03-24-2006, 13:42

flash with any zulia box usb smart or with pbb your set alive again.........

gct · 03-24-2006, 13:50

it is real?

work 100%?

thx

monu · 03-24-2006, 16:10

hot air the keypad ic

gct · 03-25-2006, 04:48

hot air the keypad IC also cannot,still same.

what the problem,the ic problem?
it have two ic ,what is the function of this two small ic?

monu · 03-25-2006, 06:44

ok fine then if u have cruser then flash with cruiser that is best way to flash it and suceesfull some board does not work but 60% works

monu · 03-25-2006, 06:44

and also replaced the key pad with other on one

gct · 03-25-2006, 08:31

thx, but will try later.

b coz not have cruiser

03-20-2006, 03:55	#1 (permalink)
gct Freak Poster Join Date: Mar 2006 Posts: 157 Member: 239119 Status: Offline Thanks Meter: 9	w550i keypad problem after falsh with hwk with TP now phone can on but keypad just can press 1.3.5.7.9.0 and LED no light what is the problem here? software? or hardware? please help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6700c keypad problem	luyanda	Nokia Hardware & Hardware Repair	20	04-09-2014 10:16
w550i keypad problem	albedo83	Sony Ericsson Hardware Repair	33	06-20-2009 07:33
w550i keypad problem	alhamde16	Sony Ericsson Hardware Repair	8	04-19-2009 12:56
w550i keypad problem	RATHNAMOBILESS	Sony Ericsson Hardware Repair	2	11-07-2008 15:34
w550i keypad problem	SANDIP RISHI	Sony Ericsson Hardware Repair	4	05-10-2007 16:26

03-20-2006, 04:52	#2 (permalink)
GSMLover2010 No Life Poster Join Date: Feb 2004 Age: 44 Posts: 558 Member: 52956 Status: Offline Thanks Meter: 49	do you know before flash it works ! it seems hardware or you do bad replace keypad when opening phone. you can flash it with other box

03-20-2006, 05:31	#3 (permalink)
gct Freak Poster Join Date: Mar 2006 Posts: 157 Member: 239119 Status: Offline Thanks Meter: 9	i can comfirm before i flash it ,the keypad is working

03-20-2006, 05:37	#4 (permalink)
gct Freak Poster Join Date: Mar 2006 Posts: 157 Member: 239119 Status: Offline Thanks Meter: 9	do u have this problem before? GSMLover2010 nobody can help me? or when i use tp to flash, SPARK the KEYPAD I.C? or have i bypass the i.c to other i.c anyone know,what problem of this? software or hardware? anyone can comfirm? thanks

03-20-2006, 19:50	#5 (permalink)
mobilesmith Freak Poster Join Date: Feb 2005 Location: mal Age: 46 Posts: 348 Member: 117968 Status: Offline Thanks Meter: 27	@gct hi, are u confirm before do your firmware upgrade , the keypad is well working?? if it is , what r u trying to do with hardware?? mostly like u have mess with that GDFS, & u can try to write GDFS & unlock to it..

03-24-2006, 13:42	#7 (permalink)
atulgsm Freak Poster Join Date: Aug 2005 Location: mumbai Posts: 271 Member: 170231 Status: Offline Thanks Meter: 6	flash with any zulia box usb smart or with pbb your set alive again.........

03-24-2006, 13:50	#8 (permalink)
gct Freak Poster Join Date: Mar 2006 Posts: 157 Member: 239119 Status: Offline Thanks Meter: 9	it is real? work 100%? thx

03-24-2006, 16:10	#9 (permalink)
monu Junior Member Join Date: Aug 2003 Location: india Age: 44 Posts: 12 Member: 36907 Status: Offline Thanks Meter: 0	hot air the keypad ic

03-25-2006, 04:48	#10 (permalink)
gct Freak Poster Join Date: Mar 2006 Posts: 157 Member: 239119 Status: Offline Thanks Meter: 9	hot air the keypad IC also cannot,still same. what the problem,the ic problem? it have two ic ,what is the function of this two small ic?

03-25-2006, 06:44	#11 (permalink)
monu Junior Member Join Date: Aug 2003 Location: india Age: 44 Posts: 12 Member: 36907 Status: Offline Thanks Meter: 0	ok fine then if u have cruser then flash with cruiser that is best way to flash it and suceesfull some board does not work but 60% works

03-25-2006, 06:44	#12 (permalink)
monu Junior Member Join Date: Aug 2003 Location: india Age: 44 Posts: 12 Member: 36907 Status: Offline Thanks Meter: 0	and also replaced the key pad with other on one

03-25-2006, 08:31	#13 (permalink)
gct Freak Poster Join Date: Mar 2006 Posts: 157 Member: 239119 Status: Offline Thanks Meter: 9	thx, but will try later. b coz not have cruiser