what's wrong with this K800 - GSM-Forum

abbasp · 11-06-2007, 09:07

hi
i can not flash this k800 ,i recieve this log

GUI v0.91380073/UNI
Card serial:xxxxxxx
Loaded 51 flash descriptors
Abort all operations.
Elapsed:31 secs.
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801380895 CERT:RED
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
Flash ID check:897E
Flash props sent ok
not supported as standalone
Elapsed:4 secs.

did anybody experienced same problem before

lie_james · 11-06-2007, 16:23

hello abbasp,please update your SEtoll main software first before you flash this phone.try use "setool v0.19380096"and then go to setting & mark "use server for ccsa flashing".you need mark this because it's Db2020 friends.for flashing free in DB2020,but for unlock you need credit for this.

abbasp · 11-07-2007, 08:13

hi mate this the after using with new se tool version

v0.91380096/UNI
Card serial:xxxxxxx
Loaded 51 flash descriptors
Will backup GDFS now.
ChipID:9900,EMP protocol:0301
RECOVERY BOOTROM MODE DETECTED
Speed:921600
OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801380895 CERT:RED
FLASH CID:49 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
phone CID not supported in that mode
Elapsed:3 secs.

lie_james · 11-07-2007, 16:48

go to setting tab in setool and mark "use server" to flash your phone.if you not mark"use server",you can not flash your phone (phone CID not supported in that mode
Elapsed:3 secs.) because it's DB2020 friend

11-06-2007, 09:07	#1 (permalink)
abbasp Crazy Poster Join Date: Jul 2007 Posts: 56 Member: 538223 Status: Offline Thanks Meter: 2	what's wrong with this K800 hi i can not flash this k800 ,i recieve this log GUI v0.91380073/UNI Card serial:xxxxxxx Loaded 51 flash descriptors Abort all operations. Elapsed:31 secs. ChipID:9900,EMP protocol:0301 Speed:921600 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801380895 CERT:RED FLASH CID:49 COLOR:RED PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0 Flash ID check:897E Flash props sent ok not supported as standalone Elapsed:4 secs. did anybody experienced same problem before

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What's wrong with this Tems and Cable?	pesawat	Sony Ericsson	6	08-28-2008 04:42
what's wrong with this (on K320i)	d4t4	DreamBox	3	04-20-2008 22:10
what's wrong with this eeprom, mw3020	8051	Infineon C16X M51 & ARM7 M52 BASED	1	12-16-2004 07:41

11-06-2007, 16:23	#2 (permalink)
lie_james Freak Poster Join Date: Jun 2007 Location: indonesia Age: 39 Posts: 438 Member: 531344 Status: Offline Thanks Meter: 23	hello abbasp,please update your SEtoll main software first before you flash this phone.try use "setool v0.19380096"and then go to setting & mark "use server for ccsa flashing".you need mark this because it's Db2020 friends.for flashing free in DB2020,but for unlock you need credit for this.

11-07-2007, 08:13	#3 (permalink)
abbasp Crazy Poster Join Date: Jul 2007 Posts: 56 Member: 538223 Status: Offline Thanks Meter: 2	hi mate this the after using with new se tool version v0.91380096/UNI Card serial:xxxxxxx Loaded 51 flash descriptors Will backup GDFS now. ChipID:9900,EMP protocol:0301 RECOVERY BOOTROM MODE DETECTED Speed:921600 OTP LOCKED:1 CID:49 PAF:1 IMEI:35170801380895 CERT:RED FLASH CID:49 COLOR:RED PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0 LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005 Flash ID check:897E Flash props sent ok phone CID not supported in that mode Elapsed:3 secs.

11-07-2007, 16:48	#4 (permalink)
lie_james Freak Poster Join Date: Jun 2007 Location: indonesia Age: 39 Posts: 438 Member: 531344 Status: Offline Thanks Meter: 23	go to setting tab in setool and mark "use server" to flash your phone.if you not mark"use server",you can not flash your phone (phone CID not supported in that mode Elapsed:3 secs.) because it's DB2020 friend