UNLOCK C975 Boot Loader 0.6.3.6 SW Version :R245_U_82.21.91I
 

How does on unlock this version of c975 which asks for subsidy password even after successful unlock via test point or test point downgrade of boot loader. I tried to change sw version by flashing with full flash from boot loader support but sw version remain the same.

How does one unlock these versions

you need to unlock with tp.
tp pic is at support site.
thankx
falakx

use tp, but be carefully many dead phones with this solution.;)

he said He Have DOne with TP successfully
And also the Downgrade as well Full flash Even but Still Same Bro....
MAke ur Mobile Connected with Smartmoto VIA tp and then do a PDS repair then a FULL flash And see what Happened.....To be HONEST ur Problem is Weird....KINDA strange

i got 1 with the same problem
so i try flash a full flash into it
but after that phone cant power on
it just can only go to force boot mode
ive done repair pds, flashing and unlock rsa
but it wont help too

any solution for this?

Hi, ruocoop
This problem can be solved by full flashing with "overwrite boot-loader area" option.
In case of any error or failure please, mail an operation log to support@ smart-clip.com or here in private.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Well i have some problem here ....almost same ...i Flashed Boot file to phone using TP ....after that i Remove RSA...then the boot loader was changed.But i cant swtich on the fone ....flashed with R24 flash file but cant swtich on the phone.And there is no coresponding flash file R245_U_82.21.91I in support area.What to do now?????

Dear mates
Problem with C975 loader 6.36
i did TP Procedure
But when i try to Unlock it it gives following error.
n hell worried why its Showing C975 in A835 Group.

SmartMoto 1.15
Clip serial: 3xxxxxx, version: 2.22, initializing... OK
Searching for phone... no phone found
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not

found
Switching to flash mode... OK
Reading phone boot version... io timeout
Searching for phone... no phone found
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not

found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... 0x0068-0x00B2 (x2)
Phone group: A835,A845,A920,A925

Internal error 0001
Sending boot... failed
Warning: Phone may need "Remove RSA" procedure to get unlocked or flashed, check model list

at "Unlock" tab if flash mode fails to start

Any Solution.

Now on any action it ask for.
Warning: Phone may need "Remove RSA" procedure to get unlocked or flashed, check model list.
and when i try to Remove RSA
it gives internal error 0001

Any Solution.

smartmoto not support 6.36 boot ! any doubts yet ?

enjoy
sm4rtboy

no support 6.36 boot by smartmoto ! so forget TP for moment !
any doubts yet, blind zeros !? it´s a shame !

br
sm4rtboy

OFCOURSE YES, R245_U_82.21.91 NOT SUPPORTED, AND ANY PLAY MIGHT LEAD TO DAMAGES.

infact...there is two type of c975 0636...i have unlock some c975 0636 version R245 U82 21 80 via TP..no problem at all...but R245 U82 21 91 canot be unlock...it will lead to dead phone...and SC tean seem to be silent on this even after so many post here..they dont even reply on this matter...hope they will do something on this.

BR

GSMUK

0636 supported via tp:)

hi, im having same problem on some of these c975 bootloader 6.3.6
Ive tried more than 20 phones so far, 10 unlocked good, 2 detected as a835, 4 dead, and 4 unlocked properly ( now bootloader 0.5.F.1) but still remain locked. im sure there are plenty of people out there like me, having these problems............so please somebody give us a solution for these problems

all other models like l6, l7, u6, v3i, v3x are easy to unlock in comparison to c975, so please smart clip team - post here the solution with full details please

@ sm4rtboy

just a quick reminder that this forum is here to discuss problems and solutions, if anyone isnt too sure about what they are posting, they should kindly keep their ideas to themselves

fact is, that c975 bootloader 0.6.3.6 can be unlocked via test point solution

thanks for understanding m8