Unlock of Huawei, ZTE, LG, Vodafone, Avio Azumi, Fly and other MTK models - Page 5 - GSM-Forum

guljee786 · 11-22-2011, 07:57

LG S310 unlocking procedure

flah backup

Code:

Z3X BOX Serial Port (COM8), provider - FTDI, drv. ver. 2.4.16.0 from 2/17/2009
MCU: MT6235, HW rev. B.00, SW rev. A.01
Release the Power ON button
Testing external RAM...64 Mb
Architecture: NAND,    Manufacturer: Samsung,    Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 24 Mb, Filesystem size - 104 Mb
Firmware - ROSEMARY_PCB01_GPRS_MT6235B_S01.MAUI_09AW0944LGE_WISE_SP_W10_32
Hardware IMEI could not be read
Analyzing flash structure, please wait (up to 6 minutes!)...OK
"LG.wxbk" saved, 52.17 Mb

Read code error

Code:

Z3X BOX Serial Port (COM8), provider - FTDI, drv. ver. 2.4.16.0 from 2/17/2009
MCU: MT6235, HW rev. B.00, SW rev. A.01
Release the Power ON button
Testing external RAM...64 Mb
Architecture: NAND,    Manufacturer: Samsung,    Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 24 Mb, Filesystem size - 104 Mb
Firmware - ROSEMARY_PCB01_GPRS_MT6235B_S01.MAUI_09AW0944LGE_WISE_SP_W10_32
Hardware IMEI could not be read
Not valid IMEI, operation cannot be performed

direct unlock error

Code:

Z3X BOX Serial Port (COM8), provider - FTDI, drv. ver. 2.4.16.0 from 2/17/2009
MCU: MT6235, HW rev. B.00, SW rev. A.01
Release the Power ON button
Testing external RAM...64 Mb
Architecture: NAND,    Manufacturer: Samsung,    Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 24 Mb, Filesystem size - 104 Mb
Firmware - ROSEMARY_PCB01_GPRS_MT6235B_S01.MAUI_09AW0944LGE_WISE_SP_W10_32
Hardware IMEI could not be read
Not valid IMEI, operation cannot be performed

I already sent backup flash to support

http://www.ziddu.com/download/17470756/LGS310.rar.html

Guljee

ramsey1976 · 11-22-2011, 09:33

still not all mtk can go with this i tried x330t lg and it cant unlock the security .....SmartMoto 4.26
S-Card: Smart-Clip dongle, v 3.10, assigned Smart-Clip: Europe, initializing... OK
USB Serial Port (COM18), provider - FTDI, drv. ver. 1.0.2154.0 from 4/15/2004
MCU: MT6235, HW rev. A.04, SW rev. A.01
Release the Power ON button
Testing external RAM...64 Mb
Architecture: NAND, Manufacturer: Samsung, Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 32 Mb, Filesystem size - 96 Mb
Firmware - A7267_INDIA_PCB01_GPRS_MT6235B_S01.X330T-00-V10C-AME-XX-JAN-19-2011
Hardware IMEI could not be read
Not valid IMEI, operation cannot be performed....................try and include in next update

GSM_Support · 11-22-2011, 09:45

@ ramsey1976,

Read phone backup from this handset and send it along with the log file to support[at]smart-clip.com or upload it to some file sharing web site and PM me link file for it, please.

Best Regards
GSMServer team

jose miguel · 11-22-2011, 16:11

can not read, can not do backup.

Quote:

Thanks to Mr.Developer <[email protected]> for translation to Espanol!
SmartMoto 4.26
S-Card: /////////////// Smart-Clip dongle, v 3.10, registrada con Smart-Clip: /////////////// Europa, Inicializando... OK
USB Serial Port (COM8), provider - ODEON, drv. ver. 2.0.0.0 from 18-05-2006
MCU: MT6253, HW rev. A.02, SW rev. A.00
Suelte el boton de encendido
Chequeo de la memoria exterior8 Mb
Arquitectura: NOR, Fabricante: Toshiba, El modelo de chip no encontrado [98009E-2]
El modelo de chip no encontrado
Unhandled exception C0000005 [0044C291]
Operation log guardado en "C:\Documents and Settings\benjamin\Escritorio\SmartMoto log 22-11-2011.txt"
USB Serial Port (COM8), provider - ODEON, drv. ver. 2.0.0.0 from 18-05-2006
MCU: MT6253, HW rev. A.02, SW rev. A.00
Suelte el boton de encendido
Chequeo de la memoria exterior8 Mb
Arquitectura: NOR, Fabricante: Toshiba, El modelo de chip no encontrado [98009E-2]
Firmware size - 13.75 Mb, Filesystem size - 2.25 Mb
Unhandled exception C0000005 [0044B330]

Quote:

Originally Posted by GSM_Support

@ jose miguel,

Have you read phone backup from this phone before performing any operation?
Please send us backup copy along with the log file to support[at]smart-clip.com or upload it to some file sharing web site and give us the link.

Best Regards
GSMServer team

Demongsm · 11-22-2011, 21:37

Is there anyone who tested HUAWEI G6603 ,Vodafone 252 and new OT-807 with Smart Moto 4.26 ?
May I send flash files for GSM support?
Anyone have pinout for this model? (G6603 ?)
BR

GSM_Support · 11-23-2011, 08:25

@ Demongsm,

Please read phone backups from the handsets you have and send them to support[at]smart-clip.com or upload them to any file sharing web site and send link for them to us.
Cable pinouts for MTK based phone models can be found by this link.

Best Regards
GSMServer team

danimir · 11-23-2011, 10:40

http://forum.gsmhosting.com/vbb/f268...small-1383304/

GSM_Support · 11-23-2011, 17:21

@ gsm8775, sjakie, francoo, ramsey1976, guljee786 & danimir,

New Smart-Clip update was just released. Try running unlock procedure with the latest SmartMoto version (v4.27).

Don't forget to make backups before testing new models. Please post your feedbacks & backup copies after unlock operation.

Best Regards
GSMServer team

super boy24 · 11-23-2011, 19:36

Thanks for this great update i have finally repaired my motorola gleam EX211 sim blocked it has worked like magic.

BR'
super boy24

alexguarin · 11-23-2011, 22:32

Imei repair will be ADD ? in Huawei security 2011 (serie Gxxx) G7010 and other Models

MTK6235 will be supported for Imei repair? Alcatel OT800 OT802 and other Models

guljee786 · 11-24-2011, 09:44

Try with 4.27 version but same

LG S310 read backup

Code:

Z3X BOX Serial Port (COM8), provider - FTDI, drv. ver. 2.4.16.0 from 2/17/2009
MCU: MT6235, HW rev. B.00, SW rev. A.01
Release the Power ON button
Testing external RAM...64 Mb
Architecture: NAND,    Manufacturer: Samsung,    Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 24 Mb, Filesystem size - 104 Mb
Firmware - ROSEMARY_PCB01_GPRS_MT6235B_S01.MAUI_09AW0944LGE_WISE_SP_W10_32
Hardware IMEI could not be read
Analyzing flash structure, please wait (up to 6 minutes!)...OK
"LG S310.wxbk" saved, 52.79 Mb

Read code error

Code:

Z3X BOX Serial Port (COM8), provider - FTDI, drv. ver. 2.4.16.0 from 2/17/2009
MCU: MT6235, HW rev. B.00, SW rev. A.01
Release the Power ON button
Testing external RAM...64 Mb
Architecture: NAND,    Manufacturer: Samsung,    Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 24 Mb, Filesystem size - 104 Mb
Firmware - ROSEMARY_PCB01_GPRS_MT6235B_S01.MAUI_09AW0944LGE_WISE_SP_W10_32
Hardware IMEI could not be read
Not valid IMEI, operation cannot be performed

direct unlock error

Code:

Z3X BOX Serial Port (COM8), provider - FTDI, drv. ver. 2.4.16.0 from 2/17/2009
MCU: MT6235, HW rev. B.00, SW rev. A.01
Release the Power ON button
Testing external RAM...64 Mb
Architecture: NAND,    Manufacturer: Samsung,    Chip model not detected [EC00B1-55]
Flash size - 128 Mb, Page size - 2048, Bad blocks - 0
Firmware size - 24 Mb, Filesystem size - 104 Mb
Firmware - ROSEMARY_PCB01_GPRS_MT6235B_S01.MAUI_09AW0944LGE_WISE_SP_W10_32
Hardware IMEI could not be read
Not valid IMEI, operation cannot be performed

Guljee

fabicel · 11-25-2011, 18:19

great update thank you very much so is GsmServer Lante thousand congratulations pa

GSM PAVIA · 11-26-2011, 11:25

unlock zte r620 by smart moto

SmartMoto 4.26
S-Card: 94 Smart-Clip dongle, v 3.10, assigned Smart-Clip: 37 Europe, initializing... OK
USB Serial Port (COM7), provider - FTDI, drv. ver. 2.6.0.0 from 22/10/2009
MCU: MT6223, HW rev. A.08, SW rev. A.00
Release the Power ON button
Testing external RAM...4 Mb
Architecture: NOR, Chip manufacturer not detected [C2227E-22212201]
Flash size - 16 Mb, UNIFORM
Firmware size - 8.50 Mb, Filesystem size - 7.50 Mb
Firmware - MT6223D_09A_PCB01_GPRS_MT6223_S00.FE-FR-P109B10V1_0_2B05
Hardware IMEI could not be read
Software IMEI: 8693
Volume /dev/ffs1 mounted
Reading codes...OK

apps · 11-26-2011, 13:48

EX 119
MTK USB Port (COM34), provider - MediaTek Inc., drv. ver. 1.1032.0.0 from 7/28/2010
MCU: MT6236, HW rev. A.02, SW rev. A.00
Release the Power ON button
Sending boot...Com write error, 3e3
Preparing...
COM port write error

SOLUTION PLS ..

fabicel · 11-26-2011, 16:48

I have a g6620 GsmServer lords and also leave pictures I read eror codes and boot eror

11-23-2011, 10:40	#67 (permalink)
danimir Insane Poster Join Date: Dec 2005 Location: bulgaria Posts: 72 Member: 205138 Status: Offline Thanks Meter: 6	g7007 problem http://forum.gsmhosting.com/vbb/f268...small-1383304/

11-23-2011, 17:21	#68 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,992 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,862	@ gsm8775, sjakie, francoo, ramsey1976, guljee786 & danimir, New Smart-Clip update was just released. Try running unlock procedure with the latest SmartMoto version (v4.27). Don't forget to make backups before testing new models. Please post your feedbacks & backup copies after unlock operation. Best Regards GSMServer team Last edited by GSM_Support; 11-23-2011 at 19:33.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-13-1999 19:18

11-22-2011, 09:33	#62 (permalink)
ramsey1976 No Life Poster Join Date: Sep 2007 Location: nigeria Posts: 602 Member: 581848 Status: Offline Thanks Meter: 119	still not all mtk can go with this i tried x330t lg and it cant unlock the security .....SmartMoto 4.26 S-Card: Smart-Clip dongle, v 3.10, assigned Smart-Clip: Europe, initializing... OK USB Serial Port (COM18), provider - FTDI, drv. ver. 1.0.2154.0 from 4/15/2004 MCU: MT6235, HW rev. A.04, SW rev. A.01 Release the Power ON button Testing external RAM...64 Mb Architecture: NAND, Manufacturer: Samsung, Chip model not detected [EC00B1-55] Flash size - 128 Mb, Page size - 2048, Bad blocks - 0 Firmware size - 32 Mb, Filesystem size - 96 Mb Firmware - A7267_INDIA_PCB01_GPRS_MT6235B_S01.X330T-00-V10C-AME-XX-JAN-19-2011 Hardware IMEI could not be read Not valid IMEI, operation cannot be performed....................try and include in next update

11-22-2011, 09:45	#63 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,992 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,862	@ ramsey1976, Read phone backup from this handset and send it along with the log file to support[at]smart-clip.com or upload it to some file sharing web site and PM me link file for it, please. Best Regards GSMServer team

11-22-2011, 21:37	#65 (permalink)
Demongsm No Life Poster Join Date: Aug 2005 Location: Somewhere in Spacetime Age: 48 Posts: 630 Member: 168364 Status: Offline Thanks Meter: 174	Is there anyone who tested HUAWEI G6603 ,Vodafone 252 and new OT-807 with Smart Moto 4.26 ? May I send flash files for GSM support? Anyone have pinout for this model? (G6603 ?) BR

11-23-2011, 08:25	#66 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,992 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,862	@ Demongsm, Please read phone backups from the handsets you have and send them to support[at]smart-clip.com or upload them to any file sharing web site and send link for them to us. Cable pinouts for MTK based phone models can be found by this link. Best Regards GSMServer team

11-23-2011, 19:36	#69 (permalink)
super boy24 Freak Poster Join Date: Jan 2004 Location: IN THIS WORLD Age: 45 Posts: 383 Member: 49594 Status: Offline Thanks Meter: 39	Thanks for this great update i have finally repaired my motorola gleam EX211 sim blocked it has worked like magic. BR' super boy24

11-23-2011, 22:32	#70 (permalink)
alexguarin Freak Poster Join Date: Oct 2009 Location: colombia Posts: 160 Member: 1143499 Status: Offline Thanks Meter: 28	Imei repair will be ADD ? in Huawei security 2011 (serie Gxxx) G7010 and other Models MTK6235 will be supported for Imei repair? Alcatel OT800 OT802 and other Models

11-25-2011, 18:19	#72 (permalink)
fabicel No Life Poster Join Date: Jul 2008 Location: ESPAÑA Posts: 1,442 Member: 808967 Status: Offline Thanks Meter: 155	great update thank you very much so is GsmServer Lante thousand congratulations pa

11-26-2011, 11:25	#73 (permalink)
GSM PAVIA No Life Poster Join Date: Feb 2006 Location: campioni del mondo Posts: 1,321 Member: 235881 Status: Offline Thanks Meter: 221	unlock zte r620 by smart moto SmartMoto 4.26 S-Card: 94 Smart-Clip dongle, v 3.10, assigned Smart-Clip: 37 Europe, initializing... OK USB Serial Port (COM7), provider - FTDI, drv. ver. 2.6.0.0 from 22/10/2009 MCU: MT6223, HW rev. A.08, SW rev. A.00 Release the Power ON button Testing external RAM...4 Mb Architecture: NOR, Chip manufacturer not detected [C2227E-22212201] Flash size - 16 Mb, UNIFORM Firmware size - 8.50 Mb, Filesystem size - 7.50 Mb Firmware - MT6223D_09A_PCB01_GPRS_MT6223_S00.FE-FR-P109B10V1_0_2B05 Hardware IMEI could not be read Software IMEI: 8693 Volume /dev/ffs1 mounted Reading codes...OK

11-26-2011, 13:48	#74 (permalink)
apps Junior Member Join Date: Jan 2006 Posts: 11 Member: 227262 Status: Offline Thanks Meter: 1	EX 119 MTK USB Port (COM34), provider - MediaTek Inc., drv. ver. 1.1032.0.0 from 7/28/2010 MCU: MT6236, HW rev. A.02, SW rev. A.00 Release the Power ON button Sending boot...Com write error, 3e3 Preparing... COM port write error SOLUTION PLS ..

11-26-2011, 16:48	#75 (permalink)
fabicel No Life Poster Join Date: Jul 2008 Location: ESPAÑA Posts: 1,442 Member: 808967 Status: Offline Thanks Meter: 155	I have a g6620 GsmServer lords and also leave pictures I read eror codes and boot eror