V1050 how to bring back Boot loader 0.6.3.1 - GSM-Forum

Dj King · 03-16-2008, 08:25

I just got here V1050 Vodafone w/ bootloader 0.6.3.1 appears after putting the battery. So, I just repair PDS. After the PDS repairing procedure, phone now show garbage screen with black and white colors. I flash the phone with V1050_R26LD_U_83.38.49I_lp0039_full_flash.mfw, but the result is the same garbage black and white screen. I also done testpoint procedure but the result is the same. How can I bring back the bootloader 0.6.3.1?

Dj King · 03-17-2008, 03:48

anybody? how can I sort this problem?

Dj King · 03-17-2008, 05:59

Is there any other sw that can repair this problem? Or is there anybody can share a full flash backup .mbk of this fone?

Mr.Tinkertrain · 03-17-2008, 08:19

@ Dj King,

Please tell us what firmware version your phone originally had.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Dj King · 03-17-2008, 09:42

@Mr Tinkertrain

Thanks for the reply sir! The phone has an original firm version of R26LD_U_83.38.49I_LP0039.

Mr.Tinkertrain · 03-17-2008, 10:11

@ Dj King,

The phone was flashed with the highest available firmware version. Try to performed Repair PDS and Full Flash procedures once again. Save log file and post it here, just don't forget to hide your serial number.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Dj King · 03-17-2008, 11:28

////////////////////////////////////////////////////////

Dj King · 03-17-2008, 12:14

Here's the second log file and same result. I flash with other version. Still no luck.

Switching to flash mode... OK
Reading phone boot version... 5.F1
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050

IMEI OTP status: locked
Security area saved to "PDS for S Flash Rainbow POG (6).mbk"
Login request... OK
Writing flash section 4 of 4... 100% (10.5 Kb/sec)
Restarting phone... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found S Blank Rainbow POG
Switching to flash mode... OK
IMEI OTP status: locked
Repair PDS request... OK
Performing PDS repair... OK
Writing flash section 2 of 2... 100% (120 Kb/sec)
Turning phone off... OK
Flash completed!

Any ideas? I think repair PDS on smartmoto for this model don't work. Cannot fix or repair the Blue and white screen after putting the battery on the phone.

Mr.Tinkertrain · 03-17-2008, 12:33

@ Dj King,

Full Flash the phone with the same firmware version like it had or higher one. R26LD_U_83.38.49I is the highest available firmware version, Full Flash the phone with it.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Dj King · 03-17-2008, 12:45

Quote:

Originally Posted by Mr.Tinkertrain

@ Dj King,

Full Flash the phone with the same firmware version like it had or higher one. R26LD_U_83.38.49I is the highest available firmware version, Full Flash the phone with it.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

I almost try 5 times repairing PDA and flashing with R26LD_U_83.38.49I firm. With and w/out testpoint. But the phone always garbage blue and white screen appears after putting the battery to fone instead of bootloader 0.6.3.1.

Mr.Tinkertrain · 03-17-2008, 13:18

@ Dj King,

As the handset had boot version 6.31 it supposed to be unlocked via Remove RSA procedure.
What boot version it has at this moment?

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Dj King · 03-17-2008, 13:35

There is no boot version as I said before because when I put battery to phone, there is no more bootversion displayed on the screen. It Just displays only garbage blue and white colors.

Before I repair the phone with smartmoto, when I put the battery to phone, it quickly displays Bootversion 06.31 and it's firm version on the phone's lcd. But, when I repair PDS with Smartmoto, the displayed bootversion 06.31 on the lcd has disappeared and became all went to garbage blue and white colors on the screen.

Mr.Tinkertrain · 03-17-2008, 13:42

@ @ Dj King,

Try to perform Remove RSA procedure, manual can be found here.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Dj King · 03-18-2008, 00:33

Quote:

Originally Posted by Mr.Tinkertrain

@ @ Dj King,

Try to perform Remove RSA procedure, manual can be found here.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Same result Sir! I did everything you told. Any other options?

Mr.Tinkertrain · 03-18-2008, 08:58

@ Dj King,

Now try to perform Repair PDS and Full Flash procedures once again. In case if the problem will be still the same, then most probably that the phone has some hardware malfunction.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

03-16-2008, 08:25	#1 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	V1050 how to bring back Boot loader 0.6.3.1 I just got here V1050 Vodafone w/ bootloader 0.6.3.1 appears after putting the battery. So, I just repair PDS. After the PDS repairing procedure, phone now show garbage screen with black and white colors. I flash the phone with V1050_R26LD_U_83.38.49I_lp0039_full_flash.mfw, but the result is the same garbage black and white screen. I also done testpoint procedure but the result is the same. How can I bring back the bootloader 0.6.3.1?

03-17-2008, 11:28	#7 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	//////////////////////////////////////////////////////// Last edited by GSM_Support; 03-17-2008 at 11:49. Reason: Contained serial number

03-17-2008, 13:35	#12 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	There is no boot version as I said before because when I put battery to phone, there is no more bootversion displayed on the screen. It Just displays only garbage blue and white colors. Before I repair the phone with smartmoto, when I put the battery to phone, it quickly displays Bootversion 06.31 and it's firm version on the phone's lcd. But, when I repair PDS with Smartmoto, the displayed bootversion 06.31 on the lcd has disappeared and became all went to garbage blue and white colors on the screen. Last edited by Dj King; 03-17-2008 at 13:42.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HOW TO UNLOCK Motorola C975 boot loader 0.6.3.6 sw ver.R245_U_82.21.801	joan6668	Motorola P2k	8	02-25-2007 16:24
Boot Loader 0.6.3.1 or higher	ALEXEY1979	Motorola P2k	0	02-21-2006 23:42
How to unlock Motorola C980 boot_loader 0.6.3.1?	unicos	Motorola P2k	12	01-14-2006 23:12
C 980 boot loader 0.6.3.1 unlocking?	zoki	Smart-Clip	2	10-22-2005 12:24
New C975 Boot Loader 0.6.3.1 When it Will be Supported ..	Aamir_Zia	Smart-Clip	5	06-10-2005 07:03

03-17-2008, 03:48	#2 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	anybody? how can I sort this problem?

03-17-2008, 05:59	#3 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	Is there any other sw that can repair this problem? Or is there anybody can share a full flash backup .mbk of this fone?

03-17-2008, 08:19	#4 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Dj King, Please tell us what firmware version your phone originally had. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

03-17-2008, 09:42	#5 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	@Mr Tinkertrain Thanks for the reply sir! The phone has an original firm version of R26LD_U_83.38.49I_LP0039.

03-17-2008, 10:11	#6 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Dj King, The phone was flashed with the highest available firmware version. Try to performed Repair PDS and Full Flash procedures once again. Save log file and post it here, just don't forget to hide your serial number. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

03-17-2008, 12:14	#8 (permalink)
Dj King Freak Poster Join Date: Sep 2001 Location: Galaxy far far away! Posts: 397 Member: 6428 Status: Offline Thanks Meter: 43	Here's the second log file and same result. I flash with other version. Still no luck. Switching to flash mode... OK Reading phone boot version... 5.F1 Reading flash id... Intel - 28F256L18B (x2) Phone group: E770,E1000,E1070,V3x,V975,V1050 IMEI OTP status: locked Security area saved to "PDS for S Flash Rainbow POG (6).mbk" Login request... OK Writing flash section 4 of 4... 100% (10.5 Kb/sec) Restarting phone... OK Searching for phone... no phone found Searching for phone... no phone found Searching for phone... no phone found Searching for phone... no phone found Searching for phone... no phone found Searching for phone... found S Blank Rainbow POG Switching to flash mode... OK IMEI OTP status: locked Repair PDS request... OK Performing PDS repair... OK Writing flash section 2 of 2... 100% (120 Kb/sec) Turning phone off... OK Flash completed! Any ideas? I think repair PDS on smartmoto for this model don't work. Cannot fix or repair the Blue and white screen after putting the battery on the phone.

03-17-2008, 12:33	#9 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Dj King, Full Flash the phone with the same firmware version like it had or higher one. R26LD_U_83.38.49I is the highest available firmware version, Full Flash the phone with it. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

03-17-2008, 13:18	#11 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Dj King, As the handset had boot version 6.31 it supposed to be unlocked via Remove RSA procedure. What boot version it has at this moment? Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

03-17-2008, 13:42	#13 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ @ Dj King, Try to perform Remove RSA procedure, manual can be found here. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

03-18-2008, 08:58	#15 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Dj King, Now try to perform Repair PDS and Full Flash procedures once again. In case if the problem will be still the same, then most probably that the phone has some hardware malfunction. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com