v3 bootloader 0A.52 - GSM-Forum

coolmax · 10-26-2006, 17:49

v3 bootloader 0A.52 sw VERSION R4515_G_08_BD.43R
Is this version supported by smartclip?
thank you

MAK_US1977 · 10-26-2006, 18:16

u can try with testpoint for V3r
if not done read backup and send it to SC team

LetsGoCellular · 10-26-2006, 20:42

The V3r with 0A.52 bootloader is not yet supported by smart-clip.

maybe · 10-26-2006, 20:59

Quote:

Originally Posted by LetsGoCellular

The V3r with 0A.52 bootloader is not yet supported by smart-clip.

Hi,
u can unlock by Testpoint.

Br

LetsGoCellular · 10-26-2006, 21:13

Quote:

Originally Posted by maybe

Hi,
u can unlock by Testpoint.

Br

You are correct for bootloader 0A.30, but not 0A.52.

Here is a log from my most recent attempt.

Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST-M30L0R8000B0
Reading flash id/2... OK, none
Phone group: V235,V360,V360v,V3i,V3r,L7,L7v
Hardware IMEI: 352509013738657
Security area saved to "S Blank Neptune LTE2 352509013738657.pds"
Unlocking phone... Unlock is not supported for this firmware version
Searching for phone... found Motorola Phone (V3r), getting test interface... OK
Model V3r
Firmware R3443U2_G_0E.C0.13R
Reading info OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... A.52

MOBICOM · 10-26-2006, 21:52

I'am not sure but you can try to downgrade with RSD with some older supported full flash and then to try to unlock with SC.

On your own risk!!!

wbr.

mrfixit · 10-26-2006, 23:55

or use other tools.....

[Rod] · 10-27-2006, 02:01

i have done it with usb-smart. i have also smart-clip, i have used usb-smart just because i haven't smart clip with me. but all go ok, i am sure smart clip does it too.

H.Y.K · 10-27-2006, 04:37

Quote:

Originally Posted by [Rod]

i have done it with usb-smart. i have also smart-clip, i have used usb-smart just because i haven't smart clip with me. but all go ok, i am sure smart clip does it too.

Hello bro!

you mean smart clip can unlock new version R3443U2_G_0E.C0.13R ??? pls see LetsGoCellular 's post,he can't unlock this phone.Any idea? or wait for next update from smart clip team???

Mr.Tinkertrain · 10-27-2006, 08:07

@ H.Y.K,

V3r boot 0A.52 has not been fully tested for support of Smart-Clip yet.
So, we can not give you any clear advise.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

oric · 10-27-2006, 10:25

Few days ago I successfully unlocked V3v SW: R4515_G_08.BD.62R and Boot Loader:OA.52 , use TP as V3r choose V3i from a list in SmartMoto and "Unlock via Testpoint" function of SmartMoto from "Unlock" tab .

coolmax · 10-27-2006, 15:51

Quote:

Originally Posted by oric

Few days ago I successfully unlocked V3v SW: R4515_G_08.BD.62R and Boot Loader:OA.52 , use TP as V3r choose V3i from a list in SmartMoto and "Unlock via Testpoint" function of SmartMoto from "Unlock" tab .

can u please give us a operation log for the unlock? so we can all hav a look see see if that version is supported..so we may learn
thanks

oric · 10-27-2006, 16:36

Unfortunately no , phone is back to customer, but I have full backup readed.

kades · 10-27-2006, 22:47

Quote:

Originally Posted by oric

Few days ago I successfully unlocked V3v SW: R4515_G_08.BD.62R and Boot Loader:OA.52 , use TP as V3r choose V3i from a list in SmartMoto and "Unlock via Testpoint" function of SmartMoto from "Unlock" tab .

Procedure 100% tested by me... Worked Great!!!

V3v
Bootloader: 0A.52
SW: R4515_G_08.BD.62R

kadES

KSM1 · 10-28-2006, 07:40

please give mo your complete procedure kadES.....i have the same phone and could not get tp correct did u do with or without battery and when succeeded tp did you use v3r or v3i....urgent reply pls thx

10-26-2006, 17:49	#1 (permalink)
coolmax No Life Poster Join Date: Jun 2005 Location: in the line of fire.. Posts: 681 Member: 157118 Status: Offline Thanks Meter: 156	v3 bootloader 0A.52 v3 bootloader 0A.52 sw VERSION R4515_G_08_BD.43R Is this version supported by smartclip? thank you

10-27-2006, 08:07	#10 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ H.Y.K, V3r boot 0A.52 has not been fully tested for support of Smart-Clip yet. So, we can not give you any clear advise. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com Last edited by GSM_Support; 10-27-2006 at 12:08.

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
how to unlock V3 Bootloader 0A.52?	gebokecu	Smart-Clip	32	12-23-2007 09:32
v3 bootloader 0a.52 unlocked but 3sec off problem	yousaf22us	Smart-Clip	8	01-13-2007 12:07
need bootloader 0a.52	enrocas	Motorola P2k	1	12-27-2006 00:47
I need bootloader 0A.52 of a V3i	babaro	Motorola P2k	0	12-25-2006 13:49
v3r with bootloader 0A.52 and software version R4515_G_08.BD.62R unlocking	SicilianBoy	Smart-Clip	4	12-17-2006 22:02

10-26-2006, 18:16	#2 (permalink)
MAK_US1977 No Life Poster Join Date: Apr 2001 Location: Egypt Age: 46 Posts: 1,530 Member: 4263 Status: Offline Sonork: 100.1582330 Thanks Meter: 49	u can try with testpoint for V3r if not done read backup and send it to SC team

10-26-2006, 20:42	#3 (permalink)
LetsGoCellular Junior Member Join Date: Mar 2006 Age: 51 Posts: 35 Member: 246198 Status: Offline Thanks Meter: 0	The V3r with 0A.52 bootloader is not yet supported by smart-clip.

10-26-2006, 21:52	#6 (permalink)
MOBICOM No Life Poster Join Date: Jun 2004 Location: MACEDONIA Posts: 1,895 Member: 67805 Status: Offline Thanks Meter: 364	I'am not sure but you can try to downgrade with RSD with some older supported full flash and then to try to unlock with SC. On your own risk!!! wbr.

10-26-2006, 23:55	#7 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	or use other tools.....

10-27-2006, 02:01	#8 (permalink)
[Rod] No Life Poster Join Date: Jun 2003 Location: somewhere Age: 40 Posts: 2,318 Member: 31028 Status: Offline Thanks Meter: 56	i have done it with usb-smart. i have also smart-clip, i have used usb-smart just because i haven't smart clip with me. but all go ok, i am sure smart clip does it too.

10-27-2006, 10:25	#11 (permalink)
oric Freak Poster Join Date: Feb 2004 Location: cellular land Age: 63 Posts: 383 Member: 52236 Status: Offline Thanks Meter: 48	Few days ago I successfully unlocked V3v SW: R4515_G_08.BD.62R and Boot Loader:OA.52 , use TP as V3r choose V3i from a list in SmartMoto and "Unlock via Testpoint" function of SmartMoto from "Unlock" tab .

10-27-2006, 16:36	#13 (permalink)
oric Freak Poster Join Date: Feb 2004 Location: cellular land Age: 63 Posts: 383 Member: 52236 Status: Offline Thanks Meter: 48	Unfortunately no , phone is back to customer, but I have full backup readed.

10-28-2006, 07:40	#15 (permalink)
KSM1 Banned Join Date: Apr 2005 Posts: 273 Member: 138443 Status: Offline Thanks Meter: 1	please give mo your complete procedure kadES.....i have the same phone and could not get tp correct did u do with or without battery and when succeeded tp did you use v3r or v3i....urgent reply pls thx