V3a change meid - GSM-Forum

noob-tech · 09-24-2010, 16:27

I cannot change the meid or pesn of my v3a
It ask me to patch but it got error at patch after I waited for 5 mins
What should I do any 1 can help me?

Mr.Tinkertrain · 09-25-2010, 07:38

IMEI/ESN/MEID section of SmartMoto service software was implemented by developer of this program for repair (original IMEI/ESN/MEID restore) purposes only!
For some models IMEI/ESN/MEID could be restored simply by connecting the handset to SmartMoto via Smart-Clip as for flashing.
Some models require to be flashed with "IMEI/ESN/MEID repair firmware patch", only after that IMEI/ESN/MEID could be restored.
In some cases flash chip on phone’s PCB requires to be replaced, to allow user to restore IMEI/ESN/MEID.

However, every user that applies to this option must remember the original IMEI/ESN/MEID to be able to restore it.
In any case if SmartMoto user, during phone repair process, applies IMEI/ESN/MEID that differs from the original IMEI/ESN/MEID, which was previously set with the phone, is doing that on his own responsibility.

Developer of SmartMoto software does not take any responsibility for any incorrect use of that program.

Please perform RESTORE MEID operation once again and post here log files (don't forget to hide serials)

Specify V3a details.

___
Best Regards
GsmServer Team
www.smart-clip.com
www.scoutdongle.com
https://www.boot-loader.com
www.octopusbox.com

Become a Boot-Loader v2.0 Fan

Become a Smart-Clip Fan

noob-tech · 09-28-2010, 05:41

hi the below is my logs for v3a plz help me take a look after i patch the phone it got error b2 thanks in advance
SmartMoto 4.05
S-Card: ******* Smart-Clip dongle, v 3.03, assigned Smart-Clip: ****** Europe, initializing... OK
Smart Adaptor: serial ******, firmware version 1.05
Clip serial: ******, version: 5.02, initializing... OK
Searching for phone... found Motorola A41x/V32x, getting test interface... OK
Model Motorola A41x/V32x
Firmware R38.0_X_01.24.00R
Switching to flash mode... OK [Flash MSM6100]
Reading phone boot version... 90.00
Reading flash id... Toshiba - TC58512
Phone group: C290,V323,V323i,V325,V325xi,V325i
Searching bad sectors ...found 1
Hardware ESN: ******(6****)
MEID: ***********
Operation log saved to "C:\Program Files\GsmServer\SmartMoto\SmartMoto log 28-09-2010.txt"
error B2

GSM_Support · 09-28-2010, 07:53

@ noob-tech,

What network provider the handset is locked to?
Why are you trying to Restore it's ESN number?

Best Regards
GSMServer team

noob-tech · 09-28-2010, 09:20

my cutomer require me to change the meid or esn to what they want
so what should i do to change ?

GSM_Support · 09-28-2010, 09:38

@ noob-tech,

Check your PM, please.

Best Regards
GSMServer team

nadeem126 · 05-03-2011, 12:52

from where i can get this file

"IMEI/ESN/MEID repair firmware patch" for v3a alltel

09-24-2010, 16:27	#1 (permalink)
noob-tech Freak Poster Join Date: Oct 2008 Posts: 143 Member: 888523 Status: Offline Thanks Meter: 18	V3a change meid I cannot change the meid or pesn of my v3a It ask me to patch but it got error at patch after I waited for 5 mins What should I do any 1 can help me?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Working IMEI changed phone?	Barjo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	03-01-2015 11:49
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-31-2012 20:09
Can anybody help me with solution to change 51/61/3210 IMEI?	soff	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	02-08-2011 15:28
Change Bin-file in Nokia..possible??	BiG	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	11-20-1999 16:56
ESN Change	OGOMEZ	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-21-1999 23:56

09-25-2010, 07:38	#2 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	IMEI/ESN/MEID section of SmartMoto service software was implemented by developer of this program for repair (original IMEI/ESN/MEID restore) purposes only! For some models IMEI/ESN/MEID could be restored simply by connecting the handset to SmartMoto via Smart-Clip as for flashing. Some models require to be flashed with "IMEI/ESN/MEID repair firmware patch", only after that IMEI/ESN/MEID could be restored. In some cases flash chip on phone’s PCB requires to be replaced, to allow user to restore IMEI/ESN/MEID. However, every user that applies to this option must remember the original IMEI/ESN/MEID to be able to restore it. In any case if SmartMoto user, during phone repair process, applies IMEI/ESN/MEID that differs from the original IMEI/ESN/MEID, which was previously set with the phone, is doing that on his own responsibility. Developer of SmartMoto software does not take any responsibility for any incorrect use of that program. Please perform RESTORE MEID operation once again and post here log files (don't forget to hide serials) Specify V3a details. ___ Best Regards GsmServer Team www.smart-clip.com www.scoutdongle.com https://www.boot-loader.com www.octopusbox.com Become a Boot-Loader v2.0 Fan Become a Smart-Clip Fan

09-28-2010, 05:41	#3 (permalink)
noob-tech Freak Poster Join Date: Oct 2008 Posts: 143 Member: 888523 Status: Offline Thanks Meter: 18	hi the below is my logs for v3a plz help me take a look after i patch the phone it got error b2 thanks in advance SmartMoto 4.05 S-Card: ***** Smart-Clip dongle, v 3.03, assigned Smart-Clip: ** Europe, initializing... OK Smart Adaptor: serial **, firmware version 1.05 Clip serial: **, version: 5.02, initializing... OK Searching for phone... found Motorola A41x/V32x, getting test interface... OK Model Motorola A41x/V32x Firmware R38.0_X_01.24.00R Switching to flash mode... OK [Flash MSM6100] Reading phone boot version... 90.00 Reading flash id... Toshiba - TC58512 Phone group: C290,V323,V323i,V325,V325xi,V325i Searching bad sectors ...found 1 Hardware ESN: **(6) MEID: ********* Operation log saved to "C:\Program Files\GsmServer\SmartMoto\SmartMoto log 28-09-2010.txt" error B2

09-28-2010, 07:53	#4 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ noob-tech, What network provider the handset is locked to? Why are you trying to Restore it's ESN number? Best Regards GSMServer team

09-28-2010, 09:20	#5 (permalink)
noob-tech Freak Poster Join Date: Oct 2008 Posts: 143 Member: 888523 Status: Offline Thanks Meter: 18	my cutomer require me to change the meid or esn to what they want so what should i do to change ?

09-28-2010, 09:38	#6 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ noob-tech, Check your PM, please. Best Regards GSMServer team

05-03-2011, 12:52	#7 (permalink)
nadeem126 Freak Poster Join Date: May 2006 Location: pakistan Posts: 406 Member: 284513 Status: Offline Thanks Meter: 22	from where i can get this file "IMEI/ESN/MEID repair firmware patch" for v3a alltel