GSM-Forum - v3r at&t unlocked via TP with smartmoto[reference]

heres another v3r from us which has boot load 0A.52 so unlocking is done with TP.....

first disassemble phone then check the tp point
then connect the usb then attach the tp
now once tp attached click search button then wait for the sending boot in smartmoto.now you can remove the tp and wait for the process to finish.then goto unlock tab and use unlock via tp.

http://img172.imageshack.us/img172/970/02152008qx8.jpg

http://img207.imageshack.us/img207/6...2008004lx7.jpg

http://img175.imageshack.us/img175/8...2008002bp3.jpg

http://img172.imageshack.us/img172/1...2008001cj5.jpg

http://img137.imageshack.us/img137/2020/v3rxv5.jpg

Logs Here:

Code:

SmartMoto 3.02

S-Card: Dark_AlfoX Smart-Clip dongle, v 2.01, assigned Smart-Clip: Dark_AlfoX Europe, initializing... OK

Clip serial: Dark_AlfoX, version: 4.01, initializing... OK

Searching for phone... no phone found

Searching for phone... no phone found

Clip serial: Dark_AlfoX, version: 4.01, initializing... OK

Searching for phone... no phone found

Searching for phone... no phone found

Clip serial: Dark_AlfoX, version: 4.01, initializing... OK

Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found

Switching to flash mode... OK

Reading phone boot version... 3.00

Reading flash id... ST - M30L0R8000B0

Reading flash id/2... none, OK

Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W490,W510,Z3

Hardware IMEI: 3577130128alfox

IMEI OTP status: locked

Security area saved to "PDS for S Blank Neptune LTE2 3577130128alfox.mbk"

Unlocking phone... OK