V3r unlocking problem - GSM-Forum

sameer918 · 12-04-2008, 08:58

Hello sir, I have having problem in v3r unlocking. Here is the log...
SmartMoto 3.16
S-Card: ******* Smart-Clip dongle, v 2.10, assigned Smart-Clip: ******** Europe, initializing... OK
Clip serial: *******, version: 4.08, initializing... OK
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... A.52
Boot version 0xA52 is not supported for model 'V3r,V3v'

Mr.Tinkertrain · 12-04-2008, 09:05

@ sameer918,

Boot version 0A.52 can be unlocked via TestPoint, only.
Check this link for the detailed manual, please.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

rontekgsm · 12-04-2008, 09:19

The correct procedure to unlock your V3r with boot version 0A.52 is something like this mate...

Disassemble phone

Put TP wire on correct tp as you will see in motorola TP pics

Plug usb cable to smartclip and connect cable to phone

connect TP to ground

Attach fully charged battery or 3.6 volts rps to phone

Open smartmoto and select model

Click search

Click unlock..

Goodluck...

sameer918 · 12-04-2008, 16:28

Thanx a lot .... I will try. But i flash v3r with scout without test point,after flashing it locked...so can i unlock it with scout without testpoint???

Mr.Tinkertrain · 12-04-2008, 16:39

@ sameer918,

Quote:

i flash v3r with scout without test point,after flashing it locked

More likely that the phone was flashed with the locked firmware version and option "Set Subsidy code to..." wasn't picked up. Due this reason the phone is locked now.

Quote:

so can i unlock it with scout without testpoint

SCout is powerfull multiflasher software. It can not unlock any phone.
It can be unlocked by the Smart-Clip, unfortunatey unlock procedure for this boot version supported via TP, only.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sameer918 · 12-04-2008, 17:32

Thanx sir...I unlock v3r with test point in smart clip. One more question... U r saying that "More likely that the phone was flashed with the locked firmware version and option "Set Subsidy code to..." wasn't picked up. Due this reason the phone is locked now."....... Can i download "Unlock Firmware" from bootloader.com?? So i flash with this file and Phone get not locked...Thanx

Mr.Tinkertrain · 12-05-2008, 08:30

@ sameer918,

Quote:

Can i download "Unlock Firmware" from bootloader.com?

The phone can not be unlocked by the flash file.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sameer918 · 12-05-2008, 10:21

Thanx a lot sir...So nice of u....Always helpful for all members.

12-04-2008, 08:58	#1 (permalink)
sameer918 No Life Poster Join Date: Apr 2008 Location: India Posts: 575 Member: 754208 Status: Offline Thanks Meter: 67	V3r unlocking problem Hello sir, I have having problem in v3r unlocking. Here is the log... SmartMoto 3.16 S-Card: ***** Smart-Clip dongle, v 2.10, assigned Smart-Clip: **** Europe, initializing... OK Clip serial: *****, version: 4.08, initializing... OK Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... A.52 Boot version 0xA52 is not supported for model 'V3r,V3v'

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3r unlock problem, plz help!	Saff	Motorola Hardware Repair	6	06-02-2007 07:01
v3r unlock probleme	riahi23	Ultima Box Light	2	04-16-2007 02:22
moto v3r unlock problem	mamnb	Motorola P2k	4	01-12-2007 08:57
V3r unlock problem	sopiste	Motorola P2k	2	12-03-2006 20:02
V3r unlock problem	NPL2	Smart-Clip	1	09-02-2006 08:21

12-04-2008, 09:05	#2 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sameer918, Boot version 0A.52 can be unlocked via TestPoint, only. Check this link for the detailed manual, please. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

12-04-2008, 09:19	#3 (permalink)
rontekgsm Freak Poster Join Date: Nov 2006 Location: MX-KEY is the BEST NOKIA TOOL Posts: 209 Member: 392166 Status: Offline Thanks Meter: 56	The correct procedure to unlock your V3r with boot version 0A.52 is something like this mate... Disassemble phone Put TP wire on correct tp as you will see in motorola TP pics Plug usb cable to smartclip and connect cable to phone connect TP to ground Attach fully charged battery or 3.6 volts rps to phone Open smartmoto and select model Click search Click unlock.. Goodluck...

12-04-2008, 16:28	#4 (permalink)
sameer918 No Life Poster Join Date: Apr 2008 Location: India Posts: 575 Member: 754208 Status: Offline Thanks Meter: 67	Thanx a lot .... I will try. But i flash v3r with scout without test point,after flashing it locked...so can i unlock it with scout without testpoint???

12-04-2008, 17:32	#6 (permalink)
sameer918 No Life Poster Join Date: Apr 2008 Location: India Posts: 575 Member: 754208 Status: Offline Thanks Meter: 67	Thanx sir...I unlock v3r with test point in smart clip. One more question... U r saying that "More likely that the phone was flashed with the locked firmware version and option "Set Subsidy code to..." wasn't picked up. Due this reason the phone is locked now."....... Can i download "Unlock Firmware" from bootloader.com?? So i flash with this file and Phone get not locked...Thanx

12-05-2008, 10:21	#8 (permalink)
sameer918 No Life Poster Join Date: Apr 2008 Location: India Posts: 575 Member: 754208 Status: Offline Thanks Meter: 67	Thanx a lot sir...So nice of u....Always helpful for all members.