v3xx smart-moto i/o-error - GSM-Forum

Orange_Dominica · 10-01-2014, 03:18

Hello

Im trying to prepare a V3XX AT&T for unlock, but cant complete the prepare cycle as I get I/O error after smartmoto cannot load boot in the prepare cycle.

We using a lab grade power supply adjusted for 12V @ 1 A measured at the connector end that plugs into Smartclip.

Also checked the USB V+ Smartclip output and its steady at +5V

Battery full charged and replaced with external Power supply during troubleshooting

After failure of the prepare cycle boot loader as you can see in the video the handset displays "Critical Error DEA1"

Disconnected the display and tried to re run the process ..but the same error appears.

Successfully flashed this handset with SCOUT with no errors.

All other unlock operations with this Smartclip (V3 8.26.. etc )function perfectly.

Thank you for all suggestions and help !!

V3XX.jpg Photo by orangetest | Photobucket

2014-09-29_070757.jpg Photo by orangetest | Photobucket

GSM_Support · 10-01-2014, 07:23

@ Orange_Dominica,

What is current phone state?
Can it power on and function properly?

Best Regards
GSMServer team

Orange_Dominica · 10-01-2014, 14:43

Phone is in normal state at this time..boots and operates normally.

While in bootloader " Critical Error" mode ...it will auto reboot to normal mode.

mcandre · 10-02-2014, 10:53

Orange_Dominica, This maybe a silly question, but you do know that you should unlock this phone via smart testpoint, right?

Orange_Dominica · 10-02-2014, 19:14

Hey Mac...how are you!
Yes..I have unlocked many in the old days...but I can't get any farther than the prepare cycle as it never completes "Sending Boot " before applying. Test Point.

mcandre · 10-03-2014, 12:47

I'm ok, what about you? Glad to see you here

My SC-1 has unlocked almost all phones in my area, so now I'm in Sigma/SC-2 section most of the time

Your version of V3xx R26111MLD-AS_U_96.B0.0FR is untypical (version for USA), therefore open "Prepare phone" bookmark, select "V3xx untypical" and press "Prepare Smart TestPoint" button.

Orange_Dominica · 10-04-2014, 18:22

Seems like loaders for V3xx ( typical-untypical) were consolidated ...as there is no more menu selection in the new Smart Moto...... just V3XX ?

mcandre · 10-06-2014, 10:05

I'd try it like that >>>

10-01-2014, 03:18	#1 (permalink)
Orange_Dominica No Life Poster Join Date: Oct 2004 Location: Dominica, West Indies Age: 63 Posts: 646 Member: 88701 Status: Offline Thanks Meter: 381	v3xx smart-moto i/o-error Hello Im trying to prepare a V3XX AT&T for unlock, but cant complete the prepare cycle as I get I/O error after smartmoto cannot load boot in the prepare cycle. We using a lab grade power supply adjusted for 12V @ 1 A measured at the connector end that plugs into Smartclip. Also checked the USB V+ Smartclip output and its steady at +5V Battery full charged and replaced with external Power supply during troubleshooting After failure of the prepare cycle boot loader as you can see in the video the handset displays "Critical Error DEA1" Disconnected the display and tried to re run the process ..but the same error appears. Successfully flashed this handset with SCOUT with no errors. All other unlock operations with this Smartclip (V3 8.26.. etc )function perfectly. Thank you for all suggestions and help !! V3XX.jpg Photo by orangetest \| Photobucket 2014-09-29_070757.jpg Photo by orangetest \| Photobucket Last edited by Orange_Dominica; 10-01-2014 at 03:23.

10-03-2014, 12:47	#6 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	I'm ok, what about you? Glad to see you here My SC-1 has unlocked almost all phones in my area, so now I'm in Sigma/SC-2 section most of the time Your version of V3xx R26111MLD-AS_U_96.B0.0FR is untypical (version for USA), therefore open "Prepare phone" bookmark, select "V3xx untypical" and press "Prepare Smart TestPoint" button. Last edited by mcandre; 10-03-2014 at 12:55.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-01-2014, 07:23	#2 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	@ Orange_Dominica, What is current phone state? Can it power on and function properly? Best Regards GSMServer team

10-01-2014, 14:43	#3 (permalink)
Orange_Dominica No Life Poster Join Date: Oct 2004 Location: Dominica, West Indies Age: 63 Posts: 646 Member: 88701 Status: Offline Thanks Meter: 381	Phone is in normal state at this time..boots and operates normally. While in bootloader " Critical Error" mode ...it will auto reboot to normal mode.

10-02-2014, 10:53	#4 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Orange_Dominica, This maybe a silly question, but you do know that you should unlock this phone via smart testpoint, right?

10-02-2014, 19:14	#5 (permalink)
Orange_Dominica No Life Poster Join Date: Oct 2004 Location: Dominica, West Indies Age: 63 Posts: 646 Member: 88701 Status: Offline Thanks Meter: 381	Hey Mac...how are you! Yes..I have unlocked many in the old days...but I can't get any farther than the prepare cycle as it never completes "Sending Boot " before applying. Test Point.

10-04-2014, 18:22	#7 (permalink)
Orange_Dominica No Life Poster Join Date: Oct 2004 Location: Dominica, West Indies Age: 63 Posts: 646 Member: 88701 Status: Offline Thanks Meter: 381	Seems like loaders for V3xx ( typical-untypical) were consolidated ...as there is no more menu selection in the new Smart Moto...... just V3XX ?