GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > GSMServer Products > Smart-Clip


 
 
LinkBack Thread Tools Display Modes
Old 10-16-2007, 15:35   #1 (permalink)
Freak Poster
 
Join Date: Aug 2005
Age: 48
Posts: 192
Member: 169234
Status: Offline
Thanks Meter: 10
W510 unlock by smart test point problem..


I try to unlock 3 phones w510 with smart test point by gsm server, smart moto say, unlock ok, but phone no unlocked, say enter subsidy password...



SmartMoto 2.38
S-Card: xxxxxx Smart-Clip dongle, v 1.49, assigned Smart-Clip: xxxxxxxx Europe, initializing... OK
Clip serial: xxxxxxxxx, version: 3.25, initializing... OK
Searching for phone... no phone found
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... C.50
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
io timeout
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... C.50
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... ST - M30L0R8000T0, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W 510,Z3
Hardware IMEI: 35555xxxxxxx
IMEI OTP status: locked
Security area saved to "PDS for S Flash Neptune LTE2 35555xxxxxxxx.mbk"
Performing restore from temparary backup file C:\Archivos de programa\GsmServer\SmartMoto\temporary backup\bkp_F929B1074095F04F.bk_
Restore OK
Unlocking phone... OK
Turning phone off... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (W510), getting test interface... OK
Model W510
Firmware R452G_G_08.13.05R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.50
Sending boot... OK
Stored temporary backup to C:\Archivos de programa\GsmServer\SmartMoto\temporary backup\bkp_F9299928D0A53F1B.bk_
Searching for phone... found Motorola Phone (W510), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.50
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Searching for phone... no phone found
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version...
io timeout
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... ST - M30L0R8000T0, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W 510,Z3
Hardware IMEI: 35555xxxxxxx
IMEI OTP status: locked
Security area saved to "PDS for S Flash Neptune LTE2 35555xxxxxxxxxx.mbk"
Performing restore from temparary backup file C:\Archivos de programa\GsmServer\SmartMoto\temporary backup\bkp_F9299928D0A53F1B.bk_
Restore OK
Unlocking phone... OK
Unlocking phone... OK
Unlocking phone... OK



but phone locked
 
Old 10-16-2007, 15:39   #2 (permalink)
Product Supporter
 
GSM_Support's Avatar
 
Join Date: Feb 2005
Location: GSMserver Team
Posts: 36,980
Member: 121052
Status: Offline
Sonork: 100.107126
Thanks Meter: 80,766
Have you used one or two TP contacts while unlocking?


Best Regards
GSMServer team



 
Old 10-16-2007, 15:45   #3 (permalink)
Freak Poster
 
Join Date: Aug 2005
Age: 48
Posts: 192
Member: 169234
Status: Offline
Thanks Meter: 10
Quote:
Originally Posted by GSM_Support View Post
Have you used one or two TP contacts while unlocking?


Best Regards
GSMServer team



two test points i used
 
Old 10-16-2007, 15:48   #4 (permalink)
Product Supporter
 
GSM_Support's Avatar
 
Join Date: Feb 2005
Location: GSMserver Team
Posts: 36,980
Member: 121052
Status: Offline
Sonork: 100.107126
Thanks Meter: 80,766
What firmware version at your handset?




Best Regards
GSMServer team



 
Old 10-16-2007, 15:53   #5 (permalink)
Freak Poster
 
Join Date: Aug 2005
Age: 48
Posts: 192
Member: 169234
Status: Offline
Thanks Meter: 10
Quote:
Originally Posted by GSM_Support View Post
What firmware version at your handset?




Best Regards
GSMServer team



Is a R452G_G_08.13.05R
 
Old 10-17-2007, 07:20   #6 (permalink)
Product Supporter
 
GSM_Support's Avatar
 
Join Date: Feb 2005
Location: GSMserver Team
Posts: 36,980
Member: 121052
Status: Offline
Sonork: 100.107126
Thanks Meter: 80,766
@mig200300
Please check you PM, mate...

Best Regards
GSMServer team



 
Old 10-17-2007, 11:48   #7 (permalink)
No Life Poster
 
mcandre's Avatar
 
Join Date: Mar 2006
Location: Central Europe
Age: 39
Posts: 11,877
Member: 239548
Status: Offline
Thanks Meter: 2,781
Have just tested specified issue - flashed w510 with this firmware file R452G_G_08.13.05R. The phone became locked.
Then I've unlocked it and the phone became unlocked
 
Old 10-17-2007, 23:14   #8 (permalink)
Freak Poster
 
Join Date: Aug 2005
Age: 48
Posts: 192
Member: 169234
Status: Offline
Thanks Meter: 10
Problem solved...

Problem already solved, downgrade phone and try again working fine...
Thanks for help....
 
Old 10-25-2007, 17:58   #9 (permalink)
No Life Poster
 
Join Date: Mar 2005
Location: Brazil
Age: 41
Posts: 595
Member: 131402
Status: Offline
Thanks Meter: 20
I unlocked thew W510, but the phone is not ascending the lights of the display and it is warming up

I use 1 Tp comtacts and the flash: W510_R452G_G_08.11.05R_lp0003_full_flash.mfw
 
Old 10-26-2007, 08:12   #10 (permalink)
No Life Poster
 
Mr.Tinkertrain's Avatar
 
Join Date: Feb 2006
Posts: 11,638
Member: 229997
Status: Offline
Thanks Meter: 636
@ .:Zogaib:.,

Have you disconnected display before using Smart TestPoint.
Please check th mainboard of the handset, most probably that it has some hardware malfunction.



Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com
 
Old 11-13-2007, 13:31   #11 (permalink)
Insane Poster
 
Join Date: Mar 2006
Location: pakistan
Posts: 86
Member: 243217
Status: Offline
Sonork: 1596668
Thanks Meter: 21
<< MOTOROLA W510 Phone Unlock 1000000% ok...>>

I have One Moto W510 Boot_Loder 0C.50.... Firmware R452G_G_08.11.05R
Unlocking phone... OK

Searching for phone... found Motorola Phone (W510), getting test interface... OK
Model W510
Firmware R452G_G_08.11.05R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.50
Sending boot... OK
Stored temporary backup to D:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F929A710D085A1BC.bk_
Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... C.50
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... ST - M30L0R8000T0, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W 510,Z3
Hardware IMEI: 355560010159832
IMEI OTP status: locked
Security area saved to "PDS for S Flash Neptune LTE2 355560010159832.mbk"
Performing restore from temparary backup file D:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F929A710D085A1BC.bk_
Restore OK
Unlocking phone... OK 1000000% ok
 
Old 11-22-2007, 14:47   #12 (permalink)
No Life Poster
 
Join Date: Aug 2005
Location: Here
Age: 47
Posts: 1,516
Member: 175183
Status: Offline
Sonork: 0
Thanks Meter: 120
Quote:
Originally Posted by .:Zogaib:. View Post
I unlocked thew W510, but the phone is not ascending the lights of the display and it is warming up

I use 1 Tp comtacts and the flash: W510_R452G_G_08.11.05R_lp0003_full_flash.mfw
@.:Zogaib:.

I have same problem here.
Your problem is solved?
Can you help-me?
Obrigado.
 
Old 11-22-2007, 16:25   #13 (permalink)
No Life Poster
 
Join Date: Mar 2005
Location: Brazil
Age: 41
Posts: 595
Member: 131402
Status: Offline
Thanks Meter: 20
not. the cell is died. not solution

Virou sucata
 
Old 11-22-2007, 18:22   #14 (permalink)
Banned
 
ednacell's Avatar
 
Join Date: Aug 2004
Location: Gsm Unlockers Awareness Report
Posts: 1,366
Member: 76978
Status: Offline
Thanks Meter: 15
Quote:
Originally Posted by mcandre View Post
Have just tested specified issue - flashed w510 with this firmware file R452G_G_08.13.05R. The phone became locked.
Then I've unlocked it and the phone became unlocked
So are you saying that do not need to downgrade software
R452G_G_08.13.05R, to unlock.

Another question did you used S-card or Smart-moto to flash phone...
 
Old 04-15-2008, 14:25   #15 (permalink)
No Life Poster
 
nishaon's Avatar
 
Join Date: Jan 2006
Location: Deep Blue G.S.M.
Posts: 2,369
Member: 225229
Status: Offline
Thanks Meter: 90
Same issue here, Software says, phone is unlocked, but phone says ENTER SUBSIDY PASSWORD

Actual phone was W490 T-Mobile(Boot: 0C.50, FW:
R452G_G_08.24.02R), while I get problem with TPs phone remains boot mode, revived by flashing with "R452G_G_08.13.05R_PDS009_LP0539_DRM0105_VSTG_30E_ 07_JPJAVA_G_08_W510HSA_06_08_11R_GSTPEMBAORAFR09F_ 1FF[Orange].pcf"


Can you please give me any Idea about that?
 
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
V3XX Successfully Unlock By Smart Test Point Cable pardeeptelecom Motorola ODM 1 12-10-2007 17:52
Unlock V3xx Success By Smart Test Point edong Smart-Clip 2 10-13-2007 06:01
v3XX unlocking success w/ smart test point cable.... jakoy Smart-Clip 2 10-11-2007 07:32
Is it REALLY possible to unlock W510 with new Smart Test point cable? enrocas Smart-Clip 21 10-08-2007 19:09

 



All times are GMT +1. The time now is 20:29.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.37994 seconds with 9 queries

SEO by vBSEO