w490 unlock done by {T.P}
 

it 100% works
no signal problem

Searching for phone... found Motorola Phone (W490), getting test interface... OK
Model W490
Firmware R452G_G_08.24.02R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.50
Sending boot... OK
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F901AD0D77B8.bk_
Searching for phone... found Motorola Phone (W490), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.50
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... Intel - 28FL18B
Reading flash id/2... Intel - 2256L18T, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,U 3,W5,W490,W510,Z3
Hardware IMEI: 3517800737725
IMEI OTP status: locked
Security area saved to "PDS for S Flash Neptune LTE2 3517840217705.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F901ADF5E77B8.bk_
Restore OK
Unlocking phone... OK
Turning phone off... OK
Thanks smart-clip:)...TEAM...

how can thi possibale before some mobiles unlock done butt after unlock no l.c.d light how can i understand this pease can u explain me how to unlock this phon whit prepear our unlock via tp section please
b.r
sherry mobiles

I unlok 2 W490 Today pefetly.no Lcd nor signal problem.









Br:- Awais

Would you be so kind to explain the full process to unlock it via tp and no by prepare method. 'cause I have tried so many times but I always got an "io timeout" error message.

Thanks and BR

If you don't get the LCD back light then check the PCB. I am sure you damaged it while was trying to perform TP connection. The only thing i can suggest - be more careful next time.




Best Regards
GSMServer team


http://www.gsmserver.com/img/sc_userbar_1.png

Please specify, what exactly model did you try to unlock? What was boot and fw version of this phone?
In most cases the message "io timeout" informs about low power lever whether on Smart-Clip or the phone.
Just to be sure, please reply to specified above questions.



Best Regards
GSMServer team


http://www.gsmserver.com/img/sc_userbar_1.png

http://smart-clip.com/support.php#Smart_TP

Testpoint picture is located in www.boot-loader.com, Public Downloads -> Filelists -> Testpoints

help me please, was unlock a motorola w490, I spent the falsh and the release was done but when I started to flesh it died again (no more links) but is recognized in flash bike, how can I reinstall it? or make it live again? help me.

hi bro what is your best technic to lift off the shield cover of that phone?

Also, please show the log file without serials.




Best Regards
GSMServer team


http://www.gsmserver.com/img/sc_userbar_1.png

ok Try this solution
http://http://rapidshare.com/files/2.../w490.JPG.html
100%%%%%%% working

hi
bos link not working
pls upload again
thanks

the link not work bro

GOOD WORK.....plz send me any body pinouts of w490 tp
 

send me also that how i can download new flash files

GOOD work . some one send me w 490 tp .
 

plz also help me about downloading flash files for smart clip.