30/05/2007 Added Safe Flashing Engine For Ke Lg Series !!! - Page 4 - GSM-Forum

harisa · 06-06-2007, 11:19

dear. plz tell if there are ke series flash files.not found in vygistoolbox site

**.:hack3r2k:.** · 06-06-2007, 13:36

Quote:

Originally Posted by harisa

dear. plz tell if there are ke series flash files.not found in vygistoolbox site

Here is FuriouS GOLD section, not Vygis and we keep our files on our support not on others.

Br

Naz66 · 06-06-2007, 17:53

Quote:

Originally Posted by .:hack3r2k:.

Like usual first ! This update includes 5GB of fw files but because of low upload ull have to wait bit longer. New exe available on support on BETA folder. Flashing engine is %100 safe and fail safe.

Till flashes ready as i have reports of some self killed KE970 (SHINE) i provide here repair flash.

www.hack3r2k.com/FG/KE970_FULL_REPAIR.rar

Br

REALLY GREAT UPDATE MR.HACKER.
I HAD A FONE KE 970 WHEN I TURN ON THE FONE ITS STAYS LOGO OF KE 970 I FLASHED THE FONE WITH FULL REPAIR FLASH FILE WITH THE SPEED OF 115200.

AFTER THREE AND HALF HOUR THE FONE BECOME ALIVE WORKING EVERY SINGLE THING.

THANKS AGAIN MR.HACKER FOR A GREAT SUPPORT WHICH U GAVE US MORE THEN THREE YEARS.

Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !

Flash ID(0): 0089:887E 0404
Flash ID(1): 0089:887E 0404

Writting...
Done !
Time needed - 03:38:10

**.:hack3r2k:.** · 06-06-2007, 18:59

Quote:

Originally Posted by Naz66

REALLY GREAT UPDATE MR.HACKER.
I HAD A FONE KE 970 WHEN I TURN ON THE FONE ITS STAYS LOGO OF KE 970 I FLASHED THE FONE WITH FULL REPAIR FLASH FILE WITH THE SPEED OF 115200.

AFTER THREE AND HALF HOUR THE FONE BECOME ALIVE WORKING EVERY SINGLE THING.

THANKS AGAIN MR.HACKER FOR A GREAT SUPPORT WHICH U GAVE US MORE THEN THREE YEARS.

Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !

Flash ID(0): 0089:887E 0404
Flash ID(1): 0089:887E 0404

Writting...
Done !
Time needed - 03:38:10

Why 115200 when you could use 921600 speed !!!!

Br

bassam_gsm · 06-07-2007, 07:11

nice update thanks FG team

Naz66 · 06-07-2007, 13:20

Quote:

Originally Posted by .:hack3r2k:.

Why 115200 when you could use 921600 speed !!!!

Br

SOORY MR.HACKER THAT WAS MY FIRST FONE AND USUALLY I USE 115200 CUZ ITS GIVE REALLY GOOD RESPONCE BUT NOW I WILL FLASH IT WITH 921600.THANKS FOR U ADIVCE. IM REALLY HAPPY OF HAVING REALLY GREAT TOOL.THANKS FOR ALL UR HELP .

damabib · 06-07-2007, 18:56

many thx nice time...u are best

SVH · 06-07-2007, 20:07

plz tell me does exist russian/ukrainian fw for other KE series?
and btw does exist russian for L343i

Thanx
B.R.

**.:hack3r2k:.** · 06-07-2007, 20:36

Quote:

Originally Posted by SVH

plz tell me does exist russian/ukrainian fw for other KE series?
and btw does exist russian for L343i

Thanx
B.R.

YES YES YES..-07- pack.

Br

Cake · 06-07-2007, 22:13

and what languages in ESA pack? plz

**.:hack3r2k:.** · 06-07-2007, 22:45

Quote:

Originally Posted by Cake

and what languages in ESA pack? plz

EAST ASIA...

Br

SVH · 06-08-2007, 06:50

Quote:

Originally Posted by .:hack3r2k:.

YES YES YES..-07- pack.

Br

i dont understand
1.for KE series dont exists 07 folder on support so how can i find needen flash?
2.for L343i in folder 07 i dont see any russian flashes, so are they exist or no??

Cake · 06-09-2007, 12:46

I use KG800 cable included in BlingBling edition.
use box comport
SPEED: 961200
READ FLASH
FTDI checked...

DO JOB. software ask me to press power. i did and keep pressed it.but got communication error. Phone without simcard,battery fullrecharged.

Only MBUS 5V and power light always. others never light even flash. any solution? box is brand new,phone is brand new and working.

well...i've changed com cable which i was using for KG800 flashing with GSMulti. and software goes well for READ FLASH,but when reading,same errors comes again and again saying something unvaluable, like READING address:0x01B5E800 and 0x01C1D800.software keep reading when i press "OK"

anyone have idea could i use this cable for Flashing,since lots errors comes when reading.

Cake · 06-09-2007, 13:19

Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !

Flash ID(0): 0089:887E 0404
Flash ID(1): 0089:887E 0404

Reading ...
Time needed - 00:22:46

systeam resource run out. i pressed ok. software keep reading and finished few min later,but i didnt find i read anything out , where is it o.0

**.:hack3r2k:.** · 06-09-2007, 14:51

Quote:

Originally Posted by Cake

Press power on !
Starting communication ...
Loader version: FuriouSTeaM GSM DEVELOPEMENT
Baud rate changed ok !

Flash ID(0): 0089:887E 0404
Flash ID(1): 0089:887E 0404

Reading ...
Time needed - 00:22:46

systeam resource run out. i pressed ok. software keep reading and finished few min later,but i didnt find i read anything out , where is it o.0

You need at least 128MB free of RAM in order to make dump. This is utr system pb. Increase virtual memory or add mroe ram to it.

Br

06-09-2007, 12:46	#58 (permalink)
Cake No Life Poster Join Date: May 2006 Location: Welcome Back JAf Team Posts: 808 Member: 278954 Status: Offline Thanks Meter: 26	I use KG800 cable included in BlingBling edition. use box comport SPEED: 961200 READ FLASH FTDI checked... DO JOB. software ask me to press power. i did and keep pressed it.but got communication error. Phone without simcard,battery fullrecharged. Only MBUS 5V and power light always. others never light even flash. any solution? box is brand new,phone is brand new and working. well...i've changed com cable which i was using for KG800 flashing with GSMulti. and software goes well for READ FLASH,but when reading,same errors comes again and again saying something unvaluable, like READING address:0x01B5E800 and 0x01C1D800.software keep reading when i press "OK" anyone have idea could i use this cable for Flashing,since lots errors comes when reading. Last edited by Cake; 06-09-2007 at 13:07.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
30/08/2007 Added Motorola V177/c261/w370/w375 Support !	.:hack3r2k:.	FuriousGold	135	08-09-2012 09:20
flash files for new LG series	ROMAB	VygisToolbox	1	10-23-2008 05:58
[22-05-2007] SonyEricsson WorldWide by IMEI for 35 Credits	UnlockBase.com	UnlockBase	0	05-22-2008 02:20
10-08-2007 Added 2 cable schematics for Samsung phones!	GSMtricks	Multi-Box	0	08-10-2007 09:11
23-01-2007 New arabic lang pack for Alcatel E-series were added!	GSMtricks	Multi-Box	4	01-23-2007 16:01

06-06-2007, 11:19	#46 (permalink)
harisa Freak Poster Join Date: Sep 2004 Location: PAKISTAN Age: 52 Posts: 261 Member: 81821 Status: Offline Thanks Meter: 14	dear. plz tell if there are ke series flash files.not found in vygistoolbox site

06-07-2007, 07:11	#50 (permalink)
bassam_gsm No Life Poster Join Date: Dec 2004 Location: kurdistan Age: 47 Posts: 730 Member: 101358 Status: Offline Sonork: 100.84312 Thanks Meter: 18	nice update thanks FG team

06-07-2007, 18:56	#52 (permalink)
damabib No Life Poster Join Date: Jan 2005 Location: EVERYWHERE U GO Age: 46 Posts: 4,800 Member: 106026 Status: Offline Sonork: 100.77890 Thanks Meter: 127	many thx nice time...u are best

06-07-2007, 20:07	#53 (permalink)
SVH No Life Poster Join Date: Mar 2002 Location: Europe, Lemberstadt Age: 53 Posts: 2,311 Member: 9889 Status: Offline Thanks Meter: 50	plz tell me does exist russian/ukrainian fw for other KE series? and btw does exist russian for L343i Thanx B.R.

06-07-2007, 22:13	#55 (permalink)
Cake No Life Poster Join Date: May 2006 Location: Welcome Back JAf Team Posts: 808 Member: 278954 Status: Offline Thanks Meter: 26	and what languages in ESA pack? plz

06-09-2007, 13:19	#59 (permalink)
Cake No Life Poster Join Date: May 2006 Location: Welcome Back JAf Team Posts: 808 Member: 278954 Status: Offline Thanks Meter: 26	Press power on ! Starting communication ... Loader version: FuriouSTeaM GSM DEVELOPEMENT Baud rate changed ok ! Flash ID(0): 0089:887E 0404 Flash ID(1): 0089:887E 0404 Reading ... Time needed - 00:22:46 systeam resource run out. i pressed ok. software keep reading and finished few min later,but i didnt find i read anything out , where is it o.0