GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > FuriousGold

FuriousGold FuriouS GOLD Support Area | Powered by FuriousTeam

Reply
 
LinkBack Thread Tools Display Modes
Old 07-11-2021, 11:28   #1 (permalink)
Freak Poster
 
Join Date: Aug 2015
Posts: 403
Member: 2439409
Status: Offline
Thanks Meter: 102
alcatel 9026x by tcl need firmware just show bule display


Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5188
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM17)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM17
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 261b95f92611a0deba5a2a012dbc2b2c
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem44.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM69;
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x44000145 0x31303446 0xCAB30136 0xC7C393E8 [SIZE=0x3AC000000]
IMEI1 [OTP 0000]: 35?????????????????
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 9026X-2EALAV1
USRDATA INFO: 0xEB000000 SIZE: 0x2BC880000


Getting partitions info;
Reading info;
Partitions info:
[0x00080000-0x00300000]-[proinfo]
[0x00380000-0x00500000]-[nvram]
[0x00880000-0x00A00000]-[protect1]
[0x01280000-0x00A00000]-[protect2]
[0x01C80000-0x01900000]-[persist]
[0x03580000-0x00080000]-[lk]
[0x03600000-0x00080000]-[para]
[0x03680000-0x01000000]-[boot]
[0x04680000-0x01000000]-[recovery]
[0x05680000-0x00800000]-[logo]
[0x05E80000-0x00A00000]-[expdb]
[0x06880000-0x00080000]-[seccfg]
[0x06900000-0x00200000]-[oemkeystore]
[0x06B00000-0x00600000]-[secro]
[0x07100000-0x00800000]-[keystore]
[0x07900000-0x00500000]-[tee1]
[0x07E00000-0x00500000]-[tee2]
[0x08300000-0x00080000]-[efuse]
[0x08380000-0x00100000]-[frp]
[0x08480000-0x02000000]-[nvdata]
[0x0A480000-0x02000000]-[metadata]
[0x0C480000-0x00800000]-[simlock]
[0x0CC80000-0x04000000]-[oemisc]
[0x10C80000-0x01380000]-[mobile_info]
[0x12000000-0xC0000000]-[system]
[0xD2000000-0x19000000]-[cache]
[0xEB000000-0x2BC880000]-[userdata]
[0x3A7880000-0x02B00000]-[otp]
[0x3AA380000-0x01000000]-[flashinfo]




download this firmware

9026X-2[X=A]VVBG1_4G2NCVN2.osp ?????
its ok
  Reply With Quote
Old 07-11-2021, 11:30   #2 (permalink)
Product Manager
 
.:hack3r2k:.'s Avatar
 
Join Date: Aug 2002
Location: FuriouSTeaM
Posts: 53,177
Member: 15022
Status: Offline
Sonork: 100.53452
Thanks Meter: 60,212
Yes. Can write any 9026 firmware


Br
  Reply With Quote
The Following User Says Thank You to .:hack3r2k:. For This Useful Post:
Old 07-11-2021, 14:29   #3 (permalink)
Freak Poster
 
Join Date: Aug 2015
Posts: 403
Member: 2439409
Status: Offline
Thanks Meter: 102
Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5188
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM17)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM17
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 261b95f92611a0deba5a2a012dbc2b2c
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem44.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM69;
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x44000145 0x31303446 0xCAB30136 0xC7C393E8 [SIZE=0x3AC000000]
IMEI1 [OTP 0000]: 356801-08-003225-4
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 9026X-2EALAV1
USRDATA INFO: 0xEB000000 SIZE: 0x2BC880000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting PROTECT1 partition now...
Done;
Formatting PROTECT2 partition now...
Done;
Formatting SECCFG partition now...
Done;
Formatting FRP partition now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:06:21

Log file saved to: LOG_11_07_2021_06_08_00.txt


after flash still same bule display
  Reply With Quote
Old 07-11-2021, 14:30   #4 (permalink)
Product Manager
 
.:hack3r2k:.'s Avatar
 
Join Date: Aug 2002
Location: FuriouSTeaM
Posts: 53,177
Member: 15022
Status: Offline
Sonork: 100.53452
Thanks Meter: 60,212
Quote:
Originally Posted by Gsm Unkown View Post
Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5188
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM17)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM17
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 261b95f92611a0deba5a2a012dbc2b2c
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem44.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM69;
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x44000145 0x31303446 0xCAB30136 0xC7C393E8 [SIZE=0x3AC000000]
IMEI1 [OTP 0000]: 356801-08-003225-4
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 9026X-2EALAV1
USRDATA INFO: 0xEB000000 SIZE: 0x2BC880000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting PROTECT1 partition now...
Done;
Formatting PROTECT2 partition now...
Done;
Formatting SECCFG partition now...
Done;
Formatting FRP partition now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:06:21

Log file saved to: LOG_11_07_2021_06_08_00.txt


after flash still same bule display

Then the display is bad. I will upload you later the same provider id but im sure the fault is within the display

Br


Sent from my iPhone using Tapatalk Pro
  Reply With Quote
The Following User Says Thank You to .:hack3r2k:. For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 15:55.



Powered by Searchlight © 2022 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2022 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.13597 seconds with 7 queries

SEO by vBSEO