Alcatel Vodafone 785 dead [SOLVED] Alcatel Vodafone V785-2BVDIE1 dead , lcd blacklight only when power is pressed after DIRECT unlock OTSmart v1.0.0.838 and flash V785-2[X=A,B,C,D]VDCZ1.osp , try repair flash VDIE1 , VDNZ1 , VDNZ2 and VZRO1 , after that try ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA via SP-Flash-Tool-v3.1344.0.212 via download and finally format and download , please help me br niketlen |
Quote:
If you fully formatted it with sp flash tool then you kinda destroyed it. Find an working model, read flash fully using otsmart and write it after to the faulty one Br;) |
Quote:
|
Quote:
Can be several reason, incompatible fw, low batt or maybe you mixed the model Br;) |
1 Attachment(s) Quote:
md5 a3135cb1cd134be4719d8b3c4ebd59e9 *V785-2[X=A,B,C,D]VDCZ1.osp please add autolog like in MTKReader ! |
3 Attachment(s) Quote:
and write as write factory image and still dead ... take 300mA only when power key is pressed , have any firmware 2Bxxxxx ??? please help me :confused: Using library Brom_DLL_v7.1413.5 Searching phone; Phone detected (@oem81.inf,%mtk_preloader%;PreLoader USB VCOM Port) Preparing to start flash mode; Preparing to open COM3 Connecting; Downloading DA; Initializing; Rid: 65fd5b16b87bea8f1bf3c72d6b95559a Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED Switching to DA_HIGHSPEED_VCOM; Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86; If the detection fails, install manually the port from the device manager using usbvcom.inf; DA_HIGHSPEED_VCOM (@oem81.inf,%mtk_sp_da%;DA USB VCOM Port) TRYING TO OPEN COM4; DEVICE INFO: BB CHIP: MT6572_S00 [CA01, 00, 6572, FF] HW_STORAGE_EMMC: 0x4E000115 0x4D5A5835 0x3CC40142 0xD99175EE [SIZE=0xE9880000] IMEI1 [OTP 0001]: 355250-06-_good_-5 IMEI2 [OTP 0001]: 000000-00-000000-0 PROVIDER: V785-2AVDIE1 USRDATA INFO: 0x61B80000 SIZE: 0x87D00000 Preparing to write FULL_DUMP_PART0; Writing FULL_DUMP_PART0; Preparing to write FULL_DUMP_PART1; Writing FULL_DUMP_PART1; Preparing to write FULL_DUMP_PART2; Writing FULL_DUMP_PART2; Preparing to write FULL_DUMP_PART3; Writing FULL_DUMP_PART3; Preparing to write FULL_DUMP_PART4; Writing FULL_DUMP_PART4; Success; Time needed - 00:15:12 |
Now flash again factory fw and wait some time. Maybe takes longer to start. A, B, C whatever isnt important at all. Contact me on skype pls to do some investigation Br;) |
1 Attachment(s) Quote:
i try catch U on skype br Using library Brom_DLL_v7.1413.5 Searching phone; Phone detected (@oem81.inf,%mtk_preloader%;PreLoader USB VCOM Port) Preparing to start flash mode; Preparing to open COM3 Connecting; Downloading DA; Initializing; Rid: 65fd5b16b87bea8f1bf3c72d6b95559a Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED Switching to DA_HIGHSPEED_VCOM; Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86; If the detection fails, install manually the port from the device manager using usbvcom.inf; DA_HIGHSPEED_VCOM (@oem81.inf,%mtk_sp_da%;DA USB VCOM Port) TRYING TO OPEN COM4; DEVICE INFO: BB CHIP: MT6572_S00 [CA01, 00, 6572, FF] HW_STORAGE_EMMC: 0x4E000115 0x4D5A5835 0x3CC40142 0xD99175EE [SIZE=0xE9880000] IMEI1 [OTP 0001]: 355250-06-691551-5 IMEI2 [OTP 0001]: 000000-00-000000-0 PROVIDER: V785-2AVDIE1 USRDATA INFO: 0x61B80000 SIZE: 0x87D00000 Loading the file ... Cfg done ... Formatting file system now... Done; Downloading bootloader... Done; Downloading images... Done; Success; Time needed - 00:01:30 |
Download from the support this new file V785-2[X=A]VDIE1.osp and flash it Br;) |
Quote:
Ofcourse after V785-2[X=A,B,C,D]VDCZ1.osp still dead :( Customer want polish language ! thx so much br :) |
Quote:
I will try to do it this evening or tomorrow ! Br;) |
Get from the support V785-2[X=A]VDCZ1.osp Br;) |
1 Attachment(s) Quote:
br :) |
All times are GMT +1. The time now is 23:26. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -