GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   FuriousGold (https://forum.gsmhosting.com/vbb/f272/)
-   -   FOMA L705iX Unlocking, CAN'T DETECT! (https://forum.gsmhosting.com/vbb/f272/foma-l705ix-unlocking-cant-detect-895905/)

jap_line 01-06-2010 08:00

FOMA L705iX Unlocking, CAN'T DETECT!
 
drivers are installed,
com port OK

but always like this..

http://img189.imageshack.us/img189/4471/93103291.jpg

NO RESPONSE!!

use cable # 28 and 30 but still no luck.

pls help FG Team :confused:

Babyunlocker 01-06-2010 08:34

Driver 1000%:http://depositfiles.com/files/w6p2h4r2r

Babyunlocker 01-06-2010 08:40

http://depositfiles.com/files/hae4uvsim

use this clean exe:http://depositfiles.com/files/67i9lmoab

UnLoCkit 01-06-2010 08:42

1a.LG L704i,L705i,L705iX and L706ie connecting:
- power ON phone and if it is connected to USB cable - disconnect it
- type on phone keyboard #17320508*# to enter phone test menu
- go to "Port Settings"
- select "Diag Setting" and select "USB Set for Diag"
- again go to "Port Settings"
- select "QCT mode"
- all these operations are needed after everyone phone restarting
- after this connect USB cable to phone
- start software
- select baudrate 115200,check "Enumerate PORTS" and "Auto find PORT"
- select phone model
- press "CONNECT PORT"
- if software writes "Can't find needed COMPORT"-check cable and drivers
instalation
- after port connecting,press "CONNECT PHONE"
- wait until software will read phone's info
- if selected phone model differs from phone type,readed from phone,
software can ask you what phone type you want to set
usb mode setting select communnication mode

jap_line 01-06-2010 08:50

Quote:

Originally Posted by UnLoCkit (Post 5225071)
1a.LG L704i,L705i,L705iX and L706ie connecting:
- power ON phone and if it is connected to USB cable - disconnect it
- type on phone keyboard #17320508*# to enter phone test menu
- go to "Port Settings"
- select "Diag Setting" and select "USB Set for Diag"
- again go to "Port Settings"
- select "QCT mode"
- all these operations are needed after everyone phone restarting
- after this connect USB cable to phone
- start software
- select baudrate 115200,check "Enumerate PORTS" and "Auto find PORT"
- select phone model
- press "CONNECT PORT"
- if software writes "Can't find needed COMPORT"-check cable and drivers
instalation
- after port connecting,press "CONNECT PHONE"
- wait until software will read phone's info
- if selected phone model differs from phone type,readed from phone,
software can ask you what phone type you want to set
usb mode setting select communnication mode

done with this..

thanks bro, you're the MAN;)

Code:

Software engine version: 1.0.0.3338
Searching phone ...

MODEL :        L705
COMPILED DATE :    Feb 1 2008 09:23:00
RELEASE DATE :    Jun 28 2007 18:00:00
FIRMWARE INFO :    L705iX-MSM409510-V10a-JAN-31-2008-DCM-JP
IMEI :        3xxxxxxxxxxxxxxxxxx
BLUETOOTH ADDR :    00 00 00 00 00 00

MEMORY ID :    0098:00CA
MEMORY NAME :    toshiba_tya000bc00dogg
MEMORY INFO :    0800:0040:0687

INIT NAND ROUTINES;
NAND INIT MADE;
UNLOCKED !
Time needed - 00:00:02


syanbalow 01-06-2010 11:23

thanks bro`````````````

MYUNLOCKING 06-19-2010 12:59

Unlock done after that no signal

is it works on gsm networks?? 900 or 1800??


All times are GMT +1. The time now is 12:59.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.10342 seconds with 6 queries

SEO by vBSEO