FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[TauheedMobiles]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume down and up pressed to the usb cable]
Phone detected (MediaTek USB Port (COM3))
Preparing to start flash mode;
Preparing to open COM3
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 7502f6e80046f265942f36e20bc1d812
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x484A0190 0x61344741 0x8ADFD432 0xF7C59B12 [SIZE=0x3AC000000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xEC000000 SIZE: 0x2BE3FBE00



Searching data;
Checking data;

IMEI repaired; Remove battery and cable;

Time needed - 00:00:05

[msa]

Successfully removed FRP with Furious gold OTSmart.

Select model as "Acrhos Sence 50 dc"


Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume up pressed to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM23))
Preparing to start flash mode;
Preparing to open COM23
Connecting;
Downloading DA;
Initializing;
Rid: 6f26de292ee4578ca37469e5cae9ddb2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT8163 [CB00, 01, 8163, FF]
HW_STORAGE_EMMC: 0x4D000115 0x46344741 0x1DD6F742 0x938FD3F3 [SIZE=0x3AB820000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xC6000000 SIZE: 0x2E4380000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_15_10_2019_10_50_13.txt

[DUSKnenixs]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM65))
Preparing to start flash mode;
Preparing to open COM65
Connecting;
Downloading DA;
Initializing;
Rid: 05100fb5f13114debed2de82e8eecc8f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x484A0190 0x61344741 0x77DFD432 0x7F161F6C [SIZE=0x3AC000000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xEE000000 SIZE: 0x2BD200000



Searching data;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:00

Log file saved to: LOG_15_10_2019_19_13_36.txt

[MOTHALAB79]

[edisonsuen]

Software engine version: 1.0.0.10880
Searching phone ...

MODEL : QCOM SERIES 51
COMPILED DATE : Jun 17 2017 11:25:00
RELEASE DATE : Apr 24 2017 03:00:00
FIRMWARE INFO : MPSS.JO.3.0-00291-8909_GEN_PACK-1
IMEI : 35785008023278-5
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: AU_VDF_P809V51V1.0.0B12

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: D:\Phones\FuriousGold\Software\QCOM_SMART_TOOL_v1. 0.0.10880\35785008023278_16_10_2019_19_07_50.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM26
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD
reading_data;
modem - 05004000 - 04000000
reading_data: ok;
writing_data;
modem_downgrade: ok;
reading_data_after: ok;
Looking for the interface;
Port found [ZTE Handset Diagnostic Interface (COM70)]
connect_server: OK;
restore in progress: OK;
SIM_LOCK REMOVED !

Log file saved to: LOG_16_10_2019_19_13_02.txt

Time needed - 00:05:15

[CHAUDHRAY ARSHAD]

HERE LOG

[Joel_Baah]

FURIOUS GOLD PACK 5 SUCCESSFULLY UNLOCK ALCATEL 5039D IN JUST 30 SECONDS

PROCEDURE:
1. Connect phone in EDL (adb reboot edl)
2. Open QCOM SMART TOOL MODULE
3. Select FIREHORSE MODE
4. Click on DO JOB

My log

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem157.inf,%qcomserialportdesc90080%;Android HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM3
Connecting;
Loading;
Init;
Port opened;
Hello Received;
MSM_ID: 0x000BE0E1
OEM_ID: 0x0042
MODEL_ID: 0x0047
PK_HASH: 79FBA8B6DC1F344D6D7D9C3252CAB3F25ED8A198A233C7DFDC 3E9A08B9DC789379FBA8B6DC1F344D6D7D9C3252CAB3F25ED8 A198A233C7DFDC3E9A08B9DC789379FBA8B6DC1F344D6D7D9C 3252CAB3F25ED8A198A233C7DFDC3E9A08B9DC7893
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory size 14.6 GB, target id 8937

IMEI: 3533171000****-3
PTH: 09
PTS: D23
PROV_ID: 5039D-2BTWIE1
SBTADDR: 94:27:90:61:23:A3
SWIFIADDR: 94:27:90:53:69:9D
HS_PN: SAA2DL00G10C
SSN: 54LC06BPJGC01B3

Work id: 22021984
Done;
Stype: 00000001
SECURITY: X2D0CR00CX00 Size: 00000400
Backup saved to: 35331710002***-3
Unlocking;
SIM_LOCK REMOVED !

Log file saved to: LOG_22_10_2019_05_41_40.txt

Time needed - 00:00:30

[..::GMSR::..]

2019-10-25 11:20:28.331 Autodetect COM port and phone type start!
2019-10-25 11:20:29.126 Found COM port: COM41
2019-10-25 11:20:29.126 Found phone type: Huawei Android phone (HiSilicon CPU)
2019-10-25 11:20:29.142 Open COM port COM41 (Android Adapter PCUI (COM41))...
2019-10-25 11:20:29.282 Start read phone info!
2019-10-25 11:20:34.415 Connecting to server...
2019-10-25 11:20:35.179 Connected!
2019-10-25 11:20:43.307 CP State: ready
2019-10-25 11:20:43.307 Read phone basic info...
2019-10-25 11:20:44.180 Read phone secure info...
2019-10-25 11:20:50.342 Read phone info done!

Model: FIG-L11
MEID: 00000000000000
pESN: 00000000
IMEI: 865878034670219
IMEI2: 000000000000000
IMEI3: 865878034670219
IMEISV: 22
Firmware ver.: System 8.0.0.046(02PE)
Dataver: FIG-LX1 8.0.0.122(C16)_DATA_FIG-L11_mtn_za
SN: HBEDU18307006327
PCB SN: DU4MBH1839044968
WiFi MAC: 04:79:70:AA:48:42
BlueTooth MAC: 04:79:70:AA:53:FB
Vendor: mtn
Country: za
FASTBOOT:Chipset-dallas8.0.0.001(012V)_FASTBOOT
BOOT:System 8.0.0.046(02PE)_BOOT
RECOVERYunknow)
SYSTEM:System 8.0.0.046(02PE)
MAINVER:System 8.0.0.046(02PE)
DATAVER:FIG-LX1 8.0.0.122(C16)_DATA_FIG-L11_mtn_za
APTIME:Thu Jan 4 12:59:34 CST 2018
RAM: 3G
eMMC: 32G
eMMC ID: 90014A484247346132D4C6F398672500
HUN: 6798F3C600000000

IMEI 1 Sim Lock status:
NET: unlocked
NETSUB: unlocked
SP: unlocked

2019-10-25 11:20:51.278 Phone info data backup saved to file D:\All Device Software\Backup\20191025_112050_865878034670219.BA K


Fixed IMEI 1 CRC: 865000765435353

2019-10-25 11:21:16.016 Autodetect COM port and phone type start!
2019-10-25 11:21:18.797 Found COM port: COM41
2019-10-25 11:21:18.812 Found phone type: Huawei Android phone (HiSilicon CPU)
New IMEI 1 : 865000765435353
2019-10-25 11:21:19.000 Open COM port COM41 (Android Adapter PCUI (COM41))...
2019-10-25 11:21:19.187 Connecting to server...
2019-10-25 11:21:20.092 Connected!
2019-10-25 11:21:30.122 CP State: ready
2019-10-25 11:21:30.122 Read phone basic info...
2019-10-25 11:21:31.027 Read phone secure info...

2019-10-25 11:21:37.532 Phone info data backup saved to file D:\All Device Software\Backup\20191025_112137_865878034670219.BA K

2019-10-25 11:21:38.078 Read from server...
2019-10-25 11:21:38.827 Read from server success!
2019-10-25 11:21:41.869 Phone secure identify start
2019-10-25 11:21:47.423 Phone secure identify success!
2019-10-25 11:21:47.438 Writing IMEI 1 start
2019-10-25 11:21:47.438 Reading from server...
2019-10-25 11:21:49.919 Read from server success!
2019-10-25 11:21:50.886 Write IMEI success!
2019-10-25 11:21:54.084 Synchronize NV...
2019-10-25 11:21:54.552 Synchronize NV success!
2019-10-25 11:21:54.552 Factory reset...
2019-10-25 11:21:57.204 Factory reset success!
2019-10-25 11:21:57.220 Finished!

[maxpatri9]

ALTICE S70 UNLOCK DONE

THANKS TO HACK3R2K FOR SUPPORT

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM5))
Preparing to start flash mode;
Preparing to open COM5
Connecting;
Downloading DA;
Initializing;
Rid: d2d2ba84b4981c59ef7792e612688f83
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6750 [CB00, 01, 6750, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x12010342 0xBBB4E7F2 [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 357581-08-031784-3
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x12F800000 SIZE: 0x270AFBE00



Searching data;
File not found;


Locked to [SIM1]: 370-01
code_cat_n: 12345678 enabled: no tries: 5
code_cat_ns: 56781234 enabled: no tries: 5
code_cat_sp: 11112222 enabled: no tries: 5
code_cat_c: 33334444 enabled: no tries: 5
code_cat_sim: 55556666 enabled: no tries: 5
code_cat_ns_sp: 77778888 enabled: no tries: 5
code_cat_sim_c: 99990000 enabled: no tries: 5


Locked to [SIM2]: 370-01
code_cat_n: 12345678 enabled: yes tries: 5
code_cat_ns: 56781234 enabled: no tries: 5
code_cat_sp: 11112222 enabled: no tries: 5
code_cat_c: 33334444 enabled: no tries: 5
code_cat_sim: 55556666 enabled: no tries: 5
code_cat_ns_sp: 77778888 enabled: no tries: 5
code_cat_sim_c: 99990000 enabled: no tries: 5

Phone unlocked; Remove battery and cable;

Time needed - 00:00:17

Log file saved to: LOG_25_10_2019_16_49_08.txt

[..::GMSR::..]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MTK USB Port (COM24))
Preparing to start flash mode;
Preparing to open COM24
Connecting;
Downloading DA;
Initializing;
Rid: b2eac11bc1162f71990c8357b632c0cc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x18360142 0xAD7554D4 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000


Loading the file ...
Cfg done ...
Downloading bootloader...
Done;
Downloading images...
Done;
Success;






Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MTK USB Port (COM24))
Preparing to start flash mode;
Preparing to open COM24
Connecting;
Downloading DA;
Initializing;
Rid: b2eac11bc1162f71990c8357b632c0cc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x18360142 0xAD7554D4 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000



Searching data;
Checking data;

Contents saved to :
C:\Users\Dream\Desktop\JAT-L29\HUAWEI JAT-L29_IMEI_47049DD5_F3EE2A72_b2eac11bc1162f71990c835 7b632c0cc_26_10_2019_14_46_43.osp
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (MediaTek PreLoader USB VCOM (Android) (COM6))
Preparing to start fastboot mode;

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;

IMEI repaired; Remove battery and cable;

Time needed - 00:01:26

Log file saved to: LOG_26_10_2019_14_48_07.txt

[..::GMSR::..]

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem83.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM23];
Entering diagnostic mode;
Done;
Chip type: 8860:B100

Platform Version: MOCORTM_W17.14.5_Debug
Project Version: sc7731C_CP0_modem
BASE Version: TM_BASE_W17.14.5
HW Version: sc7731C_CP0_modem
08-08-2017 15:47:57
Build number: ww815_7731c_n_64v8-user 7.0 NRD90M eng.zqingh.20170830.212539 release-keys
PHONE INFO:
BT ADDR: 22:61B:CA8:A4
SW IMEI[0]: 352394-09-020250-9
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 3

IMEI: 352394-09-020250-9 UNLOCK CODE: 85392253

Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_27_10_2019_12_18_28.txt


Time needed - 00:00:04

[-=P.F.U=-]

Software engine version: 1.0.0.10880
Searching phone ...

MODEL : QCOM SERIES 48
COMPILED DATE : Sep 2 2016 01:38:00
RELEASE DATE : Aug 17 2016 08:00:00
FIRMWARE INFO : MPSS.JO.1.2.c3-00123-8909_GEN_PACK-1
IMEI : 86224203039974-0
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: FNB_ZA_P809F52V1.0.0B08

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: E:\Software'\FG\Pack 5\QCOM_SMART_TOOL_v1.0.0.10880\86224203039974_27_1 0_2019_04_36_38.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM26
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD
Looking for the interface;
Port found [ZTE Handset Diagnostic Interface(DFU) (COM25)]
connect_server: OK;
restore in progress: OK;
SIM_LOCK REMOVED !

Log file saved to: LOG_27_10_2019_04_40_12.txt

Time needed - 00:03:37

[gile@gile]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MTK USB Port (COM51))
Preparing to start flash mode;
Preparing to open COM51
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 11ea822f139b1a84f9d9129c65fff88c
Requesting baudrate change;
Done;
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x0C510342 0xFB75A8E4 [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 359187-09-014579-0
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: V720-2BVDSI1
USRDATA INFO: 0x138000000 SIZE: 0x2682FBE00


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_30_10_2019_09_43_24.txt

[nae]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM21))
Preparing to start flash mode;
Preparing to open COM21
Connecting;
Downloading DA;
Initializing;
Rid: ed4a7d4656ad0a20f25f618ebb8f883d
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x3E4A0442 0xE5C582CE [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xEE000000 SIZE: 0x2B5C00000


Formatting FRP partition now...
Done;
Factory Reset Protection successfully removed !


Time needed - 00:00:03

Log file saved to: LOG_30_10_2019_17_45_01.txt

[maxpatri9]

HUAWEI MRD LX3 UNLOCK DONE

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM4))
Preparing to start flash mode;
Preparing to open COM4
Connecting;
Downloading DA;
Initializing;
Rid: 8798c758f44e0ee48b4019e5d467c76a
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x684A0190 0x50613842 0x8762013E 0x098617DC [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x176800000 SIZE: 0x5D1200000



Searching data;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:00

Log file saved to: LOG_30_10_2019_13_15_02.txt