ZTE 820 Obsidian First in World Tested OK

[Formingus]

I Had long story with ZTE 820, He stuck on bootloop because of root.
Maybe 10 days at free time i try to flash it but unfortunately it can't.
No Team support it, no flash present on internet, no factory reset help.
Decide to Talk with USA MetroPCS, they didn't help either
A Lot of teams murmuring around first in the world, but this is typical example of who releasing 1st in world solutions..

Someone will say: Its just a damn old ZTE, but
Its not about phone, This is proof that Furious Team in most of cases are world 1st. They bring this hard solution to us.
Obviously others will copy it and say world 1st in they section

Even i had small scratches about support with FGT as thir customer for 10 years i can say only good words about this team

Thanks for this update and hear is Log of Flashing and FRP Remove

FRP

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off with volume up pressed to the usb cable]
Phone detected (MediaTek USB Port (COM12))
Preparing to start flash mode;
Preparing to open COM12
Connecting;
Downloading DA;
Initializing;
Rid: 344e4244d20905d2447116360d0ccccc
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem86.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM13;
DEVICE INFO:
BB CHIP: MT6735M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0xB5C10705 0x8792FDB0  [SIZE=0x1D2C00000]
IMEI1 [OTP 00FF]: xxxxxxx-02-310465-0
IMEI2 [OTP 00FF]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xD6000000 SIZE: 0xF8480000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Flashing

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off with volume up pressed to the usb cable]
Phone detected (MediaTek USB Port (COM12))
Preparing to start flash mode;
Preparing to open COM12
Connecting;
Downloading DA;
Initializing;
Rid: 344e4244d20905d2447116360d0ccccc
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem86.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM13;
DEVICE INFO:
BB CHIP: MT6735M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0xB5C10705 0x8792FDB0  [SIZE=0x1D2C00000]
IMEI1 [OTP 00FF]: xxxxxxx-02-310465-0
IMEI2 [OTP 00FF]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xD6000000 SIZE: 0xF8480000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:06:28

Phone is Full working and unlocked as well

br

[Southsider2009]

Yes I did the same. Needed to get firmware but no were to even BUY the firmware.

I love them. I have studied their communication toward customers. They are the MOST polite TEAM on GSM-Forum. Especially Mr Hacks,, he never give up on users' difficulties even when the person sounds so dumb. He respond so nicely and clearly. Too many team members are damn rude and aggresive to many of their users. In one sentence "FuriousGOLD is the Apple Inc of GSM solution"

[.:hack3r2k:.]

Thanks for the nice words guys !

Br