no repair imie zte vita 10 - GSM-Forum

m&s · 07-08-2020, 16:43

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM2];
Mobile type: SPRD3
Connected;
Starting;
ERROR: Fdl sending failed;

**.:hack3r2k:.** · 07-08-2020, 17:03

Quote:

Originally Posted by m&s

Searching phone;

For an successful connection do the following:

1. Power on the phone and power it off and leave the battery inside

2. Keep pressed firmly volume DOWN key

3. Insert the usb cable inside the phone while keeping pressed volume DOWN

Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)

Preparing to sync;

Port opened [COM2];

Mobile type: SPRD3

Connected;

Starting;

ERROR: Fdl sending failed;

I think you can read . Booting failed. 100% wrong model. Check on settings about which model
You have

Sent from my iPhone using Tapatalk Pro

m&s · 07-08-2020, 17:21

**.:hack3r2k:.** · 07-08-2020, 17:36

Quote:

Originally Posted by m&s

Try to connect in diag mode with generic methods and post firmware name. Maybe is generic version and then v10 gen must be selected

Sent from my iPhone using Tapatalk Pro

m&s · 07-08-2020, 18:14

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM365];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_18B_W19.10.2_ZLA_P11.01_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W19.10.2_ZLA_P11.01
HW Version: sc9863A_modem
08-09-2019 14:16:30
Build number: MVS_PE_P963F01V1.0.0B07
PHONE INFO:
BT ADDR:
SW IMEI[0]: 867539-02-453906-5
SW IMEI[1]: 867539-02-453906-5
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

BKP saved to : BKP_000000-00-000000-0_867539-02-453906-5_00000000_8_07_2020_12_14_00.spd
SIM_LOCK TYPE: 0
ERROR: Simlock not enabled ! Phone is unlocked;

Log file saved to: LOG_8_07_2020_12_14_01.txt

Time needed - 00:00:05

**.:hack3r2k:.** · 07-08-2020, 18:37

This is unsecured version so is normal not to boot . To repair imei must use DIAG MODE

Br

m&s · 07-08-2020, 18:39

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM365];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_18B_W19.10.2_ZLA_P11.01_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W19.10.2_ZLA_P11.01
HW Version: sc9863A_modem
08-09-2019 14:16:30
Build number: MVS_PE_P963F01V1.0.0B07
PHONE INFO:
BT ADDR:
SW IMEI[0]: 867539-02-453906-5
SW IMEI[1]: 867539-02-453906-5
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

Done;

IMEI[0] repaired; Remove battery and cable;

Log file saved to: LOG_8_07_2020_12_38_59.txt

Time needed - 00:00:02

**.:hack3r2k:.** · 07-08-2020, 19:02

So all good ?

Br

m&s · 07-09-2020, 02:22

permanent locked sim

m&s · 07-09-2020, 03:24

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM78];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
OK;
PHONE INFO: NONE
PHONE ID: MGM0YmNjOGMwMDkwMzIyNg==
BT ADDR: NONE
SW IMEI[0]: xxxxxxxxxxxxx
SW IMEI[2]: xxxxxxxxxxxxxx
SW IMEI[3]: xxxxxxxxxxxxxxx

SIMLOCK FLAG: OFF
Reading NV;

NV saved to : NV_000000-00-000000-0_86xxxxxxx03-672096-1_98550000_8_07_2020_21_23_02.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Done;

Requesting data from server ! Wait please ...

Re-programming;
Security programmed;
Sync NV;
Done;

IMEI[0] repaired; Remove battery and cable;

m&s · 07-09-2020, 03:24

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)
Preparing to sync;
Port opened [COM78];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
OK;
PHONE INFO: NONE
PHONE ID: MGM0YmNjOGMwMDkwMzIyNg==
BT ADDR: NONE
SW IMEI[0]: xxxxxxxxxxxxx
SW IMEI[2]: xxxxxxxxxxxxxx
SW IMEI[3]: xxxxxxxxxxxxxxx

SIMLOCK FLAG: OFF
Reading NV;

NV saved to : NV_000000-00-000000-0_86xxxxxxx03-672096-1_98550000_8_07_2020_21_23_02.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Done;

Requesting data from server ! Wait please ...

Re-programming;
Security programmed;
Sync NV;
Done;

IMEI[0] repaired; Remove battery and cable;

**.:hack3r2k:.** · 07-09-2020, 05:47

Quote:

Originally Posted by m&s

Searching phone;

For an successful connection do the following:

1. Power on the phone and power it off and leave the battery inside

2. Keep pressed firmly volume DOWN key

3. Insert the usb cable inside the phone while keeping pressed volume DOWN

Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1)

Preparing to sync;

Port opened [COM78];

Mobile type: SPRD3

Connected;

Starting;

FDL sent;

Syncing;

Loader version: Spreadtrum Boot Block version 1.1

Starting FDL2;

FDL2 sent;

Starting auth;

HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !

OK;

PHONE INFO: NONE

PHONE ID: MGM0YmNjOGMwMDkwMzIyNg==

BT ADDR: NONE

SW IMEI[0]: xxxxxxxxxxxxx

SW IMEI[2]: xxxxxxxxxxxxxx

SW IMEI[3]: xxxxxxxxxxxxxxx

SIMLOCK FLAG: OFF

Reading NV;

NV saved to : NV_000000-00-000000-0_86xxxxxxx03-672096-1_98550000_8_07_2020_21_23_02.spd

Gathering security data;

Security check result: 0

Connecting to server;

Authorisation process started;

Done;

Requesting data from server ! Wait please ...

Re-programming;

Security programmed;

Sync NV;

Done;

IMEI[0] repaired; Remove battery and cable;

Logs look ok. Make unlock also

Sent from my iPhone using Tapatalk Pro

07-08-2020, 16:43	#1 (permalink)
m&s No Life Poster Join Date: Nov 2009 Location: huanuco-peru Posts: 2,036 Member: 1168673 Status: Offline Sonork: 100.1638333 Thanks Meter: 235	no repair imie zte vita 10 Searching phone; For an successful connection do the following: 1. Power on the phone and power it off and leave the battery inside 2. Keep pressed firmly volume DOWN key 3. Insert the usb cable inside the phone while keeping pressed volume DOWN Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1) Preparing to sync; Port opened [COM2]; Mobile type: SPRD3 Connected; Starting; ERROR: Fdl sending failed;

07-08-2020, 17:21	#3 (permalink)
m&s No Life Poster Join Date: Nov 2009 Location: huanuco-peru Posts: 2,036 Member: 1168673 Status: Offline Sonork: 100.1638333 Thanks Meter: 235

07-08-2020, 18:14	#5 (permalink)
m&s No Life Poster Join Date: Nov 2009 Location: huanuco-peru Posts: 2,036 Member: 1168673 Status: Offline Sonork: 100.1638333 Thanks Meter: 235	Searching phone; For an successful connection do the following: 1. Connect the phone powered off with the battery inside to the usb cable Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1) Preparing to sync; Port opened [COM365]; Entering diagnostic mode; Done; Chip type: 0000:0000 Platform Version: MOCORTM_18B_W19.10.2_ZLA_P11.01_Debug Project Version: sharkl3_pub BASE Version: FM_BASE_18B_W19.10.2_ZLA_P11.01 HW Version: sc9863A_modem 08-09-2019 14:16:30 Build number: MVS_PE_P963F01V1.0.0B07 PHONE INFO: BT ADDR: SW IMEI[0]: 867539-02-453906-5 SW IMEI[1]: 867539-02-453906-5 SW IMEI[2]: 867400-02-031663-8 SW IMEI[3]: 867400-02-031664-6 SIMLOCK FLAG: OFF BKP saved to : BKP_000000-00-000000-0_867539-02-453906-5_00000000_8_07_2020_12_14_00.spd SIM_LOCK TYPE: 0 ERROR: Simlock not enabled ! Phone is unlocked; Log file saved to: LOG_8_07_2020_12_14_01.txt Time needed - 00:00:05

07-08-2020, 18:37	#6 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	This is unsecured version so is normal not to boot . To repair imei must use DIAG MODE Br

07-08-2020, 18:39	#7 (permalink)
m&s No Life Poster Join Date: Nov 2009 Location: huanuco-peru Posts: 2,036 Member: 1168673 Status: Offline Sonork: 100.1638333 Thanks Meter: 235	Searching phone; For an successful connection do the following: 1. Connect the phone powered off with the battery inside to the usb cable Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1) Preparing to sync; Port opened [COM365]; Entering diagnostic mode; Done; Chip type: 0000:0000 Platform Version: MOCORTM_18B_W19.10.2_ZLA_P11.01_Debug Project Version: sharkl3_pub BASE Version: FM_BASE_18B_W19.10.2_ZLA_P11.01 HW Version: sc9863A_modem 08-09-2019 14:16:30 Build number: MVS_PE_P963F01V1.0.0B07 PHONE INFO: BT ADDR: SW IMEI[0]: 867539-02-453906-5 SW IMEI[1]: 867539-02-453906-5 SW IMEI[2]: 867400-02-031663-8 SW IMEI[3]: 867400-02-031664-6 SIMLOCK FLAG: OFF Done; IMEI[0] repaired; Remove battery and cable; Log file saved to: LOG_8_07_2020_12_38_59.txt Time needed - 00:00:02

07-08-2020, 19:02	#8 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	So all good ? Br

07-09-2020, 02:22	#9 (permalink)
m&s No Life Poster Join Date: Nov 2009 Location: huanuco-peru Posts: 2,036 Member: 1168673 Status: Offline Sonork: 100.1638333 Thanks Meter: 235	permanent locked sim

07-09-2020, 03:24	#10 (permalink)
m&s No Life Poster Join Date: Nov 2009 Location: huanuco-peru Posts: 2,036 Member: 1168673 Status: Offline Sonork: 100.1638333 Thanks Meter: 235	Searching phone; For an successful connection do the following: 1. Power on the phone and power it off and leave the battery inside 2. Keep pressed firmly volume DOWN key 3. Insert the usb cable inside the phone while keeping pressed volume DOWN Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1) Preparing to sync; Port opened [COM78]; Mobile type: SPRD3 Connected; Starting; FDL sent; Syncing; Loader version: Spreadtrum Boot Block version 1.1 Starting FDL2; FDL2 sent; Starting auth; HW IMEI : 000000-00-000000-0 Analysing data; Please WAIT ! OK; PHONE INFO: NONE PHONE ID: MGM0YmNjOGMwMDkwMzIyNg== BT ADDR: NONE SW IMEI[0]: xxxxxxxxxxxxx SW IMEI[2]: xxxxxxxxxxxxxx SW IMEI[3]: xxxxxxxxxxxxxxx SIMLOCK FLAG: OFF Reading NV; NV saved to : NV_000000-00-000000-0_86xxxxxxx03-672096-1_98550000_8_07_2020_21_23_02.spd Gathering security data; Security check result: 0 Connecting to server; Authorisation process started; Done; Requesting data from server ! Wait please ... Re-programming; Security programmed; Sync NV; Done; IMEI[0] repaired; Remove battery and cable;

07-09-2020, 03:24	#11 (permalink)
m&s No Life Poster Join Date: Nov 2009 Location: huanuco-peru Posts: 2,036 Member: 1168673 Status: Offline Sonork: 100.1638333 Thanks Meter: 235	Searching phone; For an successful connection do the following: 1. Power on the phone and power it off and leave the battery inside 2. Keep pressed firmly volume DOWN key 3. Insert the usb cable inside the phone while keeping pressed volume DOWN Phone detected (@oem118.inf,%dvcdsc%;SCI USB2Serial) (Driver version: 1.5.6.1) Preparing to sync; Port opened [COM78]; Mobile type: SPRD3 Connected; Starting; FDL sent; Syncing; Loader version: Spreadtrum Boot Block version 1.1 Starting FDL2; FDL2 sent; Starting auth; HW IMEI : 000000-00-000000-0 Analysing data; Please WAIT ! OK; PHONE INFO: NONE PHONE ID: MGM0YmNjOGMwMDkwMzIyNg== BT ADDR: NONE SW IMEI[0]: xxxxxxxxxxxxx SW IMEI[2]: xxxxxxxxxxxxxx SW IMEI[3]: xxxxxxxxxxxxxxx SIMLOCK FLAG: OFF Reading NV; NV saved to : NV_000000-00-000000-0_86xxxxxxx03-672096-1_98550000_8_07_2020_21_23_02.spd Gathering security data; Security check result: 0 Connecting to server; Authorisation process started; Done; Requesting data from server ! Wait please ... Re-programming; Security programmed; Sync NV; Done; IMEI[0] repaired; Remove battery and cable;