Nokia 2.4 unlock fail!

[toptech]

Iam trying to unlock a nokia 2.4 but without success.Apparently,it shows successful but on putting in sim card it still shows that it is locked.Here is the log though

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5489
Searching phone in normal mode;
[connect the phone powered off with volume down and up pressed to the usb cable]
Phone detected (MTK USB Port (COM129)) (Driver version: 1.1032.0.0)
Preparing to start flash mode;
Preparing to open COM129
Device hw code: 0766
Device hw sub code: 8A00
Device hw version: CA00
Device sw version: 0000
Device secure boot: True
Device serial link authorization: True
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 9cb4fa9caf092181de82a2586a21b827
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
BB ID: QURGNTZGMjRBRDRCMzZBNDAzNTI4MEUwMDIwQUQ0QzI=
HW_STORAGE_EMMC: 0x53030188 0x3233444C 0x2BEF5947 0x4FC62658 [SIZE=0x73AC00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x258800000 SIZE: 0x4DDCFBE00


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
File not found;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:01

[.:hack3r2k:.]

Originally Posted by toptech

Iam trying to unlock a nokia 2.4 but without success.Apparently,it shows successful but on putting in sim card it still shows that it is locked.Here is the log though

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5489
Searching phone in normal mode;
[connect the phone powered off with volume down and up pressed to the usb cable]
Phone detected (MTK USB Port (COM129)) (Driver version: 1.1032.0.0)
Preparing to start flash mode;
Preparing to open COM129
Device hw code: 0766
Device hw sub code: 8A00
Device hw version: CA00
Device sw version: 0000
Device secure boot: True
Device serial link authorization: True
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 9cb4fa9caf092181de82a2586a21b827
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
BB ID: QURGNTZGMjRBRDRCMzZBNDAzNTI4MEUwMDIwQUQ0QzI=
HW_STORAGE_EMMC: 0x53030188 0x3233444C 0x2BEF5947 0x4FC62658 [SIZE=0x73AC00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x258800000 SIZE: 0x4DDCFBE00


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
File not found;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:01

Use latest version and will work. The version yiu use has a bug

Br


Sent from my iPhone using Tapatalk Pro