Repair imei TCL T766J Fail

[Levi0506]

The module of the OTSart v1.0.0.5488 took his help, it says to support the TCL T766J To repair Imei and it says to carry out the process but does not change it

[.:hack3r2k:.]

Repair wont work for otp locked devices. it writes clearly on the operation log


Br

[luisvicenteA]

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5950
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM15)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM15
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 8fc6da0d454ed3e5933bbbffcc3eded2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
BB ID: NzQwM0VFQjQ3NDMyOEU2RTQ3RjMwMjBBRUQ1RkM3NjA=
HW_STORAGE_EMMC: 0x474E0113 0x52394A31 0xBE0D1038 0xC51845D5 [SIZE=0xE91000000]
IMEI1 [OTP 0000]: 354841-19-070070-7
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: T766A-2BAVGT11
USRDATA INFO: 0x1C4800000 SIZE: 0xCC74FBE00


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
NEW IMEI1: 354411-91-700131-6
OLD IMEI1: 354411-91-700131-6

IMEI repaired; Remove battery and cable;

Time needed - 00:00:04

Log file saved to: LOG_25_01_2023_09_19_59.txt

[.:hack3r2k:.]

Originally Posted by luisvicenteA

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5950
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM15)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM15
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 8fc6da0d454ed3e5933bbbffcc3eded2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
BB ID: NzQwM0VFQjQ3NDMyOEU2RTQ3RjMwMjBBRUQ1RkM3NjA=
HW_STORAGE_EMMC: 0x474E0113 0x52394A31 0xBE0D1038 0xC51845D5 [SIZE=0xE91000000]
IMEI1 [OTP 0000]: 354841-19-070070-7
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: T766A-2BAVGT11
USRDATA INFO: 0x1C4800000 SIZE: 0xCC74FBE00


SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
NEW IMEI1: 354411-91-700131-6
OLD IMEI1: 354411-91-700131-6

IMEI repaired; Remove battery and cable;

Time needed - 00:00:04

Log file saved to: LOG_25_01_2023_09_19_59.txt

read partition-> otp and upload somewhere


Br