Originally Posted by gsm_eprom (Post 13831134)

Wiko View2

network locked

y80

model:w-v720

need solution to unlock network



best regards

Originally Posted by gsm_eprom (Post 13831341)

Processor Unisoc SC9863A, Octa-Core 1.6GHz

Originally Posted by azo_ja (Post 13878505)

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem76.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM68];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_18B_W19.10.2_P12_Debug
Project Version: sharkl3_pub
BASE Version: FM_BASE_18B_W19.10.2_P12
HW Version: sc9863A_modem
06-11-2019 13:28:40
Build number: 5024D_BHBA_2SIM_V1.4_20190815_SIMLOCK
PHONE INFO:
BT ADDR:
SW IMEI[0]: 355131-10-222XXX-X
SW IMEI[1]: 355131-10-222XXX-X
SW IMEI[2]: 867400-02-031XXX-X
SW IMEI[3]: 867400-02-031XXX-X

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 4

IMEI: 355131-10-222XXX-X UNLOCK CODE: 00000000


Code reading finished; Remove battery and cable;

Log file saved to: LOG_30_10_2019_12_28_30.txt


Time needed - 00:00:20


CODE IS NOT VALID , any idea pls?

Originally Posted by kalser (Post 13882262)

How wrong , bay 1 credit and not unlock ? 5024D

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off
2. Keep pressed firmly volume UP key
3. Insert the usb cable inside the phone while keeping pressed volume UP
Phone detected (@oem128.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM41];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2019, FuriouSTeaM
Starting FDL2;
FDL2 sent;
Starting auth;
memory_type: IF_TYPE_MMC
dev_no: 0
part_type: PART_TYPE_UNKNOWN
vendor: Man 00008f Snr e01a45c9
product: UY5CS0
revision: 1.0
memory_size: 29,3 GB
HW IMEI : 000000-00-000000-0
PHONE INFO: NONE
BT ADDR: NONE
SW IMEI[0]: 355131-10-222858-6
SW IMEI[1]: 355131-10-222859-4
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON
Reading NV;


NV saved to : NV_000000-00-000000-0_355131-10-222858-6_98550000_2_11_2019_16_58_40.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Done;

Requesting data from server ! Wait please ...

You are not authorized for this operation !
ERROR: Simlock set error !

Log file saved to: LOG_2_11_2019_16_58_55.txt


Time needed - 00:02:12

Originally Posted by .:hack3r2k:. (Post 13882369)

Hi,


You must go https://www.furiousgold.com/en/produ...tipurpose-logs and actually buy it using existing credits. Whats your box id !?


Br;)

Originally Posted by kalser (Post 13882385)

my box id is



86A5C1D0

Originally Posted by .:hack3r2k:. (Post 13882386)

Done . Check now. :D . To power on phone from boot mode keep pressed long vol down + power


Br;)

Originally Posted by azo_ja (Post 13895321)

Hi!
Please add this model for unlock
Tnx..

ZTE A7 2019
BH Telecom
Detected: SCI USB2Serial (COM68)
Platform Version MOCORTM_18B_W19.10.2_ZLA_P5_DebugProject Version sharkl3_pubBASE Version FM_BASE_18B_W19.10.2_ZLA_P5HW Version sc9863A_modem05-06-2019 184959
Build number: GEN_MY_P963F02V1.0.0B03
IMEI 1: 860982040776807
IMEI 2: 860982040791806
Serial number: 722477103818
BT: 4859A46FAD4B
WIFI: 6014669182AE
Reading simlock backup, wait....
Saved to: C:\Users\gsm_a\OneDrive\Dokumenti\spreadtrum_modul e\backup\spd_simlock_nvram_backup\860982040776807_ 722477103818_diag_simlock_nvram_backup.tar
UID: 5432375234395F365F32335F31340A0A000000000000000000 00000000000000
[4]Unsupported Simlock Type
Done.

Originally Posted by azo_ja (Post 13905212)

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem76.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM83];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
ERROR;
PHONE INFO: NONE
BT ADDR: NONE
SW IMEI[0]: 860982-04-077680-7
SW IMEI[1]: 860982-04-079180-6
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON
Reading NV;


NV saved to : NV_000000-00-000000-0_860982-04-077680-7_98550000_22_11_2019_11_28_59.spd
Gathering security data;
ERROR: SECURITY ERROR ! UNSECURED DEVICES NOT SUPPORTED. USE 'DIAG MODE' TO SERVICE THOSE.

Log file saved to: LOG_22_11_2019_11_29_09.txt


Time needed - 00:05:37
:confused::confused::confused::confused::confused:

Originally Posted by azo_ja (Post 13905493)

https://mega.nz/#!9XJUmQqB!k5WSaCTQH...V5MdQhTUoRHw2Y
model ZTE A7 2019

Originally Posted by .:hack3r2k:. (Post 13832344)

Use SPDTOOL, DIAG mode and try the generic methods. One of them it will work


B r;)

Originally Posted by imranjani (Post 14399522)

Dear bro Mtk Chip NOt SPD right now