LG ME970 won't power on!!! - GSM-Forum

crazybird4 · 12-18-2007, 19:41

This phone is from mexico bought while visiting. I just puchased my vygis to unlock it. Tried to but it didnt unlock, so I then flashed it with LG-ME970_ME970cP40FL_V10c_EN_PT_ES_fw.crf it came with LG-ME970_ME970dP40FL_V10a_fw.crf. So now I can't power it on to flash it even tried the emergency 2+5+power nothing. Even took it apart everything inside says ke970 exept the main board ME970d_TCL_V10a MAR 12+6. I would appreciate the help!! Thanks

denisirias · 12-19-2007, 01:49

same here how can we fix this

sihnam · 12-19-2007, 07:56

try with a fully charged battery and flash the phone again with the same firmware, you don't need to power on the phone to flash it, just boot it as if you went to unlock it, if this doesn't work, I have a telcel firmware backup

kades · 12-19-2007, 13:26

Quote:

Originally Posted by crazybird4

This phone is from mexico bought while visiting. I just puchased my vygis to unlock it. Tried to but it didnt unlock, so I then flashed it with LG-ME970_ME970cP40FL_V10c_EN_PT_ES_fw.crf it came with LG-ME970_ME970dP40FL_V10a_fw.crf. So now I can't power it on to flash it even tried the emergency 2+5+power nothing. Even took it apart everything inside says ke970 exept the main board ME970d_TCL_V10a MAR 12+6. I would appreciate the help!! Thanks

Is it booting on the vygis when you press power???

kadES

crazybird4 · 12-19-2007, 23:55

No its not booting, when I say's power on I press on but I can't connect to the phone how do I flash. I have a back up how do I connect to it manually??

kades · 12-20-2007, 12:28

Quote:

Originally Posted by crazybird4

No its not booting, when I say's power on I press on but I can't connect to the phone how do I flash. I have a back up how do I connect to it manually??

I'm same problem with a ME770... After flashing phone doesn't boot anymore... A think there isn't solution yet...

kadES

anngiehdz · 03-03-2008, 06:13

I have the same problem with a ku311 phone had firmware problems and I flashed it but after it finish flashing it
it won't come back on it only goes as far as lg logo the turns off the on the off and again
computer will give me an error unrecognized device so will not connect to it all

any ideas?

vygism · 03-03-2008, 15:26

Your KU311 is from Spain,as I met such problem only on phones from Spain.Anyway here is link to flash,which will correct this :

http://rapidshare.com/files/96729767...LO_RO.rar.html

Regards,Vygis

rushwhq · 10-27-2008, 06:45

Hi Mr Vygism and Gobi
Im a new *******r

I started the flashing process, but i need to move the box to another place, so i moved, but failed the process, stucked on 2%. Phone became dead... I gonna try fully battery and see what happens. Because i tried external battery, pressed power, nothin happens,, Its any to enter on Emergency mode?

THANKS

rushwhq · 10-27-2008, 15:35

Hi,

Its anyone there?

adrian_1_ · 01-03-2009, 21:24

same problem here, i have a me970 from telcel mexico and after try to unlock it doesnt turn on anymore, somedy knows how to solve it??

Regards

monedadeoro · 01-28-2009, 20:07

Quote:

Originally Posted by sihnam

try with a fully charged battery and flash the phone again with the same firmware, you don't need to power on the phone to flash it, just boot it as if you went to unlock it, if this doesn't work, I have a telcel firmware backup

Can you post telcel backup,please?.
i have one dead too
Thanks

kasper17 · 01-29-2009, 16:28

the same problem with ke970 after flashing no comunication , I think they should work on new solution for dead phone after flash ( new bootloader ) Please team add new solution

vygism · 01-29-2009, 18:45

Actually all KE970-ME970 must communicate,if you haven't write to them other models flashes.If phone can't be booted directly-use old trick-remove battery from phone,connect phone to cable-in software press "Connect port" and "Connect phone" and insert battery to phone.

Regards,Vygis

kasper17 · 01-29-2009, 19:20

don't work , when i put button "on/off" in the software loader boot started and tell phone not respond , ( remove clock battery didn't help too )

This was happened after write new eprom.. My phone was new from provider and it had no harware problem

12-18-2007, 19:41	#1 (permalink)
crazybird4 Junior Member Join Date: Dec 2007 Posts: 2 Member: 652543 Status: Offline Thanks Meter: 0	LG ME970 won't power on!!! This phone is from mexico bought while visiting. I just puchased my vygis to unlock it. Tried to but it didnt unlock, so I then flashed it with LG-ME970_ME970cP40FL_V10c_EN_PT_ES_fw.crf it came with LG-ME970_ME970dP40FL_V10a_fw.crf. So now I can't power it on to flash it even tried the emergency 2+5+power nothing. Even took it apart everything inside says ke970 exept the main board ME970d_TCL_V10a MAR 12+6. I would appreciate the help!! Thanks

03-03-2008, 06:13	#7 (permalink)
anngiehdz Freak Poster Join Date: Aug 2005 Age: 47 Posts: 111 Member: 170822 Status: Offline Thanks Meter: 5	ku311 I have the same problem with a ku311 phone had firmware problems and I flashed it but after it finish flashing it it won't come back on it only goes as far as lg logo the turns off the on the off and again computer will give me an error unrecognized device so will not connect to it all any ideas? Last edited by anngiehdz; 03-03-2008 at 06:18.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LG ME970 won't power on	masterunlocking	FuriousGold	1	03-03-2009 15:00
8210 Won't power on manualy,just on ufs	ViperGSM	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	09-10-2004 13:09
Help with S40 - Won't power on!	kobayashi	Phone Unlocking Codes & Maps	0	11-21-2003 03:29
T100: after flashing won't power on anymore.	chris_ua	Sony Ericsson	6	09-06-2003 09:02
Dead T28 - Won't Power ON	LORDIKoN	Old Ericsson Phones & Sony Phones	9	05-17-2002 18:16

12-19-2007, 01:49	#2 (permalink)
denisirias No Life Poster Join Date: Jul 2006 Location: DAVIE FLORIDA Posts: 1,629 Member: 309299 Status: Offline Thanks Meter: 259	same here how can we fix this

12-19-2007, 07:56	#3 (permalink)
sihnam Freak Poster Join Date: Nov 2006 Posts: 283 Member: 390137 Status: Offline Thanks Meter: 28	try with a fully charged battery and flash the phone again with the same firmware, you don't need to power on the phone to flash it, just boot it as if you went to unlock it, if this doesn't work, I have a telcel firmware backup

12-19-2007, 23:55	#5 (permalink)
crazybird4 Junior Member Join Date: Dec 2007 Posts: 2 Member: 652543 Status: Offline Thanks Meter: 0	No its not booting, when I say's power on I press on but I can't connect to the phone how do I flash. I have a back up how do I connect to it manually??

03-03-2008, 15:26	#8 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	Your KU311 is from Spain,as I met such problem only on phones from Spain.Anyway here is link to flash,which will correct this : http://rapidshare.com/files/96729767...LO_RO.rar.html Regards,Vygis

10-27-2008, 06:45	#9 (permalink)
rushwhq Cheater -Don't Deal with him- Join Date: Aug 2005 Location: Peru Age: 43 Posts: 1,104 Member: 172399 Status: Offline Thanks Meter: 203	Hi Mr Vygism and Gobi Im a new *******r I started the flashing process, but i need to move the box to another place, so i moved, but failed the process, stucked on 2%. Phone became dead... I gonna try fully battery and see what happens. Because i tried external battery, pressed power, nothin happens,, Its any to enter on Emergency mode? THANKS

10-27-2008, 15:35	#10 (permalink)
rushwhq Cheater -Don't Deal with him- Join Date: Aug 2005 Location: Peru Age: 43 Posts: 1,104 Member: 172399 Status: Offline Thanks Meter: 203	Hi, Its anyone there?

01-03-2009, 21:24	#11 (permalink)
adrian_1_ Freak Poster Join Date: Mar 2007 Posts: 332 Member: 469257 Status: Offline Thanks Meter: 34	same problem here, i have a me970 from telcel mexico and after try to unlock it doesnt turn on anymore, somedy knows how to solve it?? Regards

01-29-2009, 16:28	#13 (permalink)
kasper17 No Life Poster Join Date: Apr 2008 Posts: 875 Member: 746882 Status: Offline Thanks Meter: 164	the same problem with ke970 after flashing no comunication , I think they should work on new solution for dead phone after flash ( new bootloader ) Please team add new solution

01-29-2009, 18:45	#14 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	Actually all KE970-ME970 must communicate,if you haven't write to them other models flashes.If phone can't be booted directly-use old trick-remove battery from phone,connect phone to cable-in software press "Connect port" and "Connect phone" and insert battery to phone. Regards,Vygis

01-29-2009, 19:20	#15 (permalink)
kasper17 No Life Poster Join Date: Apr 2008 Posts: 875 Member: 746882 Status: Offline Thanks Meter: 164	don't work , when i put button "on/off" in the software loader boot started and tell phone not respond , ( remove clock battery didn't help too ) This was happened after write new eprom.. My phone was new from provider and it had no harware problem