707sc softbank unlock by patch
 

what is the problem w/ this unit direct will not work so i use patch unlock and successfully done but signal is missing and some abnormalities function, like blinking display.
so flash again w/ repair blinking files but nothing change.
maybe NS pro know about this?

PLZ answer to this questions:

1.The phone is 707SC? or 707SCII?

2.The phone is 2006 version? or 2007 version?


2006 versions dont need to be flashed with patch file.
If you use patch file on 2006 phone, patch will damage the phone.
2007 versions require flashing with patch file to be unlocked.
You must use correct patch for each phone: 707SC patch for 707SC phone and 707SCII patch for 707SCII phone.
Flashing the phone with wrong patch will damage the phone.


NsPro is tested on thousends of 705SC, 706SC, 707SC, 707SCII, 709SC phones 2006 and 2007 versions and is working without any problem.
The nonly condition is to use the software correctly.

as Elco told its 1000% working for me always




thanks Elco


best product supporter then any one



br
gsmcrazy1

Any repair procedure for damaged fone from patch?

Fone is 707SC.
Also 1 unit here, unlock ok but still locked, so decided to patch. Phone is unlocked but blink and cannot register to network. Tried to repair fone with blink file, fone menus changed but still blink persists and no network(already tried configuring the network connectivity to no avail).

Any suggestions?

ok phone is 2006 version, 707SC. well direct unlock success but after inserting sim card phone still locked so i decided to patch to unlock it.
so if the phone is damage is it possible to fix or way?

thanks elco

Yes. Download 707SC repair blink pack from NsPro support area and flash the phone with flash files from that pack.

after flashing those files any other procedure to do after or is it expected to work perfectly after flashing it with repair blink?

if it is not a hardware problem(fone is working smoothly before unlocking), since I think we have a software glitch right here, do we still have a workaround for this? Can we full-flash it. I only have NSPro. Is there something I still need to know about this fone... BTW, fone is also 2006

Thanks for your patience ;)

problem solved thanks for the sincere reply.
707scII patch work well all is ok. but phone is 707sc well printed at the sticker of the phone:)
i can say NS pro is working well!!!


@ my buddy price adjustment:D

might as well do the above procedure...love to hate these "inaccurate labelling", or maybe reconditioned units...

hope mine werks...

My NSPro, stickin' with it through thick 'n thin ;)



note: oist wag mo muna singil taas meron pa namang susunod :D

will DONE hahahaha

nice trick inat

Additional Info in Flashing/Servicing Units to Prevent Wrong Patch/Model Selection due to Mislabelled Units

Many thanks, my unit repaired.

i have 2006.9 version 706sc but direct unlock only failed so can i unlock by patching this phone?Thank you

What kind of error you get on NsPro?
Post exactly what NsPro tell you when you try to unlock that phone.

Anyway, you can flash the phone with patch for unlock, then try to unlock it again.

Thanks elco, thats a great activity

as in my case, product was mis-labelled to 707sc but actually it was 707scII----you may aply 707scII procedure, no "untoward" incident happened to my phone whil flashing with wrong patch file :D